Total enclosure latex hood

I found the photo of this hood on Facebook, but the author did not say where it is from, what the hood is, if he owns it, etc. So I assume that the photo was also found on the Internet.

Anyway, here’s why I reposted it. First of all the hood is anatomically shaped. Second, it’s got nose tubes with quite a big internal diameter, what should (theoretically) keep the holes at the correct place and supply enough oxygen. The tubes also will not allow you to see through the nose holes (sometimes it is possible).

Then, I wonder if there is a built-in gag. It looks like the person inside the hood is quite tightly gagged.

If anybody knows where such hood can be bought – please let me know.

Self-bondage (might go wrong) art. Part XV. Do not let this happen to you!

See previous parts here.

From time to time we all neglect simple safety rules. All these preachings about “Do not smoke!”, “Going to drive – no alcohol”, “Wear protective gear”, “Red light – stop!”, “Read instruction before, not after” are sooooo boooooring…. But following them may save your life…

Everybody knows about selfbondage safety. But still we go for more risky scenarios, forget about or ignore backup release mechanisms or use not good thought out plans. Another good thing about art is that artists with good imagination can show the rest what it may look like if….

Please do not let this happen to you. Think in advance, stay calm and do not make statistics.

See 14 drawings below (you may already be familiar with some of them).

Continue reading “Self-bondage (might go wrong) art. Part XV. Do not let this happen to you!”

Simple DIY self-bondage one way device

selfbondage one way rope pulling deviceWhile we were discussing the water based time-lock, Paul Knight came up with another brilliant idea – an SRD and commercial rope ratchet replacement. Completely DIY, with lots of possibilities. You can make it as simple or as complex as you want.

Sounds like a contest 😉

Interesting gags on eBay. DIY breath-through rubber ball gag

See other parts here.

What: DIY rubber ball gag with a breathing hole and a rubber plate. 1-3/8″ diameter with a 1/2″ air hole. The shaft is 3/8″ long and the base is oval and measures 2-1/2″x3″.

Where: the gag (currently unavailable), the shop

Why: DIY means “use your own fantasy” 😉 You can “incorporate” this gag into any “device” you already have. For example, a vacuum bag, a hood, a zentai suit, a bondage frame, a bondage harness, enema bag, an enema butt-plug, a piss condom. Use it as a butt-plug or a door handle (which can shut up a bound naughty slave at any time 😉

Lots of possibilities! One problem – the gag is not available at the moment. If you find it in any other place – please let us know.

Continue reading “Interesting gags on eBay. DIY breath-through rubber ball gag”

Has anybody got a bigger pantyhose collection?

Have I seen more pantyhose at one place? Sure. In big shops. But private collections…. Hmmm… Can anybody beat it?

TTD, (if you’re around) in terms of sheer amount (not brands, that is), you might still be the winner here.

According to the owner (Facebook), she got most of them from “generous fans and boyfriends” (not something many of us can boast of).

Continue reading “Has anybody got a bigger pantyhose collection?”

Facebook is down

Facebook is down since 20-30 minutes ago. That may affect performance worldwide. For example, the “Like” buttons are actually frames with content downloaded from Facebook. And since it’s down, such buttons will delay the page downloading.

Another side effect is Twitter, which is overloaded and even down in some countries. What a chain reaction…

See also Like Ra on social networks

Chinese latex manufacturers. Demotivators of the day

First of all, I’d like to compliment China on their economic success. They do everything. They can everything. And the quality can be breathtaking. But …

1. …. it all depends on how much you finally pay.
2. …. they are breathtakingly good at copying.

Why do we so readily go to eBay and buy Chinese copies? Because they cost a fraction of what Simon O, House of Harlot, Atsuko Kudo, Demask, etc ask.

And why are the prices are so low? More reasons: Continue reading “Chinese latex manufacturers. Demotivators of the day”

Shiny Speedo S2000. A dream, just a dream…

I’ve never owned a Speedo s2000 swimsuit, but I hope it’s awful. I think the seams are itchy and scratchy, it’s not elastic and it fits horrible, the coating will peel off in a couple of days. It’s not even shiny when not wet. It looks like a cheap PVC leotard made by exploited kids in a poor village somewhere in the Far East. See the 16 photos below. Disgusting…. Especially in combination with latex stockings.

Actually, Speedo S2000 never existed. It’s a myth. All the photos were heavily Photoshopped. Have a look at eBay. See? Ridiculous…

Ohhhhh….. I want this suit sooo badly…….

See also Asian girls in swimsuits and…er… lube?

Continue reading “Shiny Speedo S2000. A dream, just a dream…”

Single-glove and arm-binder art. Part V

See Part I, Part II, Part III, Part IV

Among various armbinders this set features some “open hand” single-gloves.

I’ve never tried such type of monogloves, but according to my experience with standard tightly-closed-end design and my favourite lycra shorts/pantyhose single-glove self-bondage technique, since you are able to move your hands and fingers, the blood circulation will be less affected, and the arms will fall asleep much later (if at all).

20 pictures below. Also check Single-glove (monoglove), armbinder art forum thread.

Continue reading “Single-glove and arm-binder art. Part V”