There were a lot of technical details in my previous thread about giant climb-in balloons. Here, I try to stick to the emotional and erotic side of these toys.
One more technical detail though: Once the ballon has been inflated for a while, it is wide enough to get in without inflating it first. Even with your entire body inside, the balloon is so flexible, that it will be difficult to break. Full inflation corresponds to a flat width and length of more than 2.8 m! So, there is no need to inflate the ballon each time you want to play!
When I initially pulled the brand new non-inflated balloon over my head - I simply had to try it, it was very intense. Very snug fit around the neck, you only get to breathe the air, that is inside. The view was zero, the sound of rubber very loud. I am not into breath play, so this was only a short test.
After inflating the balloon to almost 2000 l, sticking the head inside was quite different. It is another world. I could see the light sources (lamp and bright walls reflecting the light), and a purple and very finite (about 1 m) world. Even though my body was outside, I felt mostly inside the balloon, pretty much reduced to my head and hands (which were holding the balloon). If it weren't problematic for breathing, I would like to have a small balloon, just twice the size of my head. It is not the same as a mask. Perhaps breathing could be solved with some clever piping and perhaps a "breathing gag". I like gags anyway, so that sounds like a cool combination.
Inside head to hips: This is very special too. enough air to breathe for perhaps an hour (let's say 30 minutes for security's sake), again, another universe. I want to try this with less air. With a breathing device (see above), I would like to have most air out as well. Vacuum could be very intense like this, but a bit too risky, I think. On the other hand, the balloon is natural latex, it should be possible to glue in a hose for the mouth. I might try that later. It will probably destroy the ability to fully inflate the balloon, but that doesn't matter so much. Sticking your head out of a fully inflated balloon looks much nicer than it feels.
Completely inside with all air escaped, feet near the opening. Less confining than one might think. It is a bit like being under the bedsheets (for hidden reading or whatever). I suppose, crocodiles have less space in their eggs before they hatch.
The fetal position, head out: This is my preferred position so far. You can roll about, suck out air and get almost immobile. I want to get a flexible tube to suck out air, while my head is completely outside, so I can create a vaccum with my hands far away from the opening (and escape much harder, as I hope). Apart from the fetal position, you can sit up in various postures, just a matter of stretching and moving parts of the balloon accordingly. Eventually, you might have to let some air in or out.
Stretched out, head out: Nice, but heave weight on the shoulders. I think, a tight sleeping bag is much nicer. Without vacuum, there is enough space near the hands, so you could tie yourself up, then use a tube to vacuumise yourself in. Not sure, if the final step would include breaking the balloon, if the tube has a one-way valve...
And there is one more way to "wear" the balloon: Feet to hips (or higher). No more walking, You can vacuum the balloon easily too. In the bath, you could even fill it with water and then try to get the rest of the body in. I might try that...
Ok, these are the main ideas, I have come up with so far. Remember the re-breathing issues, when the head is inside.
I find dildo bikes fascinating and I'd like to "test" one especially in a bondage scenario. Not sure if it's possible, but let's have (at least) a dedicated thread.
I would like to remind you to remember that safety must be a priority one.
I have been doing selfbondage for a long time, I know very well that the best sessions are so called inescaple bondage sessions. where you really feel helpless until release methot are available. Handcuffs and chains are well suited for this. You cannot get free without keys.
But then the matter. I was doing a selfbondage session in the woods when a surprising situation struck me. The padlock on my wrist was broken in the middle of the session, and I didn't get it open anymore. Luckily, it was "just" a padlock in one hand, not anchorpoint lock, where I would have been locked in a tree. So I survived the situation with just a fright when I got a padlock across the side cutters.
So remember to always use backup release methods. You can never predict what can happen. Play Safe and enjoy selfbondage. š
Iāve been thinking and working on out door session for years. Lately these sessions started covering a large area walking in stilettoās all dressed up. My large hill post is the current project. Trying to film these sessions is difficult so I decided to start working with a drone to cover it. Iām not bound in any of these sessions since Iām in testing mode. Iām using a mavic pro drone setup in the active track mode. These modes have limits as you can see in the video. One, they need the drone to be above 10 feet or so and sometimes it loses the subject. Leaving a drone to do its thing while bound up isnāt going to workout so well. Iāve hadĀ the āreturn homeā(RTH) feature kick in and off it goes and if I canāt get to the controller this could cause problems. In the second half of this video, I have the controller in my hands behind my back. I think this will work better Iāll just have to learn to control the drone with bound hands behind my back. During this working session I came up with the idea to maybe use the drone, while bound and dressed to find the key and navigate the easiest path to it. Not sure how that would work but Iām working on ideas.
How do you organize your collections? Any kind of collections: digital music, digital videos, CDs, DVD's, minerals, stamps, wine, magazines, pantyhose, butt-plugs, books, files, projects, images, tutorials, useful UNIX commands, scripts, programs, web-links, anything.Ā
I noticed, that I spend way too much time on searching. And too often I have duplicates stored in different places. Help?
For example, for audio files it's the easiest. They can be stored in folders (Group name/Album/Tracks), they can be automatically fingerprinted, compared with online databases and tagged, and they can be searched by tags.
For notes, links and projects I use zimĀ https://www.zim-wiki.org/ . No automation, everything is stored inĀ text format, tags can be added and searched, various plugins are supported, no automation though.
I'm not so active on the forums for the moment but I'm really busy with other things. I did have time to dig something up from my archives and this is something from years ago that I did not post yet.
Dressed in pink and blue tight clothing, I have a tight corset underneath and use an ice lock for release. Unfortunately I did managed to get out early but I don't enjoy the bondage if there is the possibility I can get free so I always try very hard to escape.
Over time, I have collected quite a few usefull items, to be used in self-bondage and related tasks. I am sure, others have too, so I suggest to collect them here.
My idea is to make one post for each item, with photos, instructions and range of use. It should not be about bondage items, but about how to make them useful or better.
While explorinig my climbing-in balloon, I had to come up with a good method to inflate it. The result is a useful in-/deflation pump with low noise. this will be the first item here.
Already existing posts could be linked here for convenience.
I have a project in mind,Ā where all inductions will be replaced with a trigger phrase. Nothing new, but I'm looking for a good, catchy phrase, which should sound good and relatively the same in different languages. Also,Ā hypnofans may already be trained with particular triggers (think of "Bambi sleep").
OTOH, I would prefer to avoid established associations,like Bambi Sleep, or unwanted associations like Bimbodoll. But I included them for completeness.
Hypnofun, hypnofun, hypnofun - bubble inductions by Lutz
Gogogirl, gogogirl, gogogirl - bubble induction by Catgirl
Bambi sleep and Bimbodoll - bubble induction by Bambi Prime
Night-night - Elena McIvor (eSuccubus)
Nice deep comfortable trance - Failing to resist by JackDrago
Bright, warm, and peaceful - Allison
as mentioned elsewhere, I got two latex balloons from https://www.bubblexl.com/english/climb-i...n-147.html. They arrived today, which means instant delivery with a postage delay of two days from the Netherlands to Germany. Pretty good, I had to wait longer for items from Germany.
Colours are blue and purple.
I found some additional instructions here: https://www.bubblexl.com/english/instruc...in-balloon . Some facts are quite interesting:
- inflate slowly, because this allows the material to stretch evenly.
- let it rest for about 45 minutes to 1 hour before getting in. I suppose, this will let the material set even more.
- after use, you can heat-treat the balloon in a dryer, which makes it shrink back (which apparently is good for the material).
- "certain chemicals", fuel, solvents and duct-tape-glue will dagame the material and the balloon will pop.
A first attempt to inflate the balloon failed, because the pump was too small and it required a lot of strength to keep the balloon opening tight onto the valve. So I had to find my bilge pump, that I had bought in a DIY market a few years ago, to inflate an inflatable latex sleeping bag and try some manual vacuum ideas. It is manual too, but it has a piston of about 2 litres, which is at least 5 times the size of the other pump. I tried it and it will do the trick. However, I need a more suitable valve and find the clip that came with a stretch band, to close the balloon after inflating. The valves that come with the bilge pump are too small of course, and they have sharp edges, as well as the adapter on the end of the tube. So I need another solution. I am glad, that they warned about the duct-tape-glue, because, it is quite an obvious idea to tape the balloon to the valve until it is inflated.
Ideas for a valve - brainstorming:
-Coke bottle with bottom cut off and edges carefully rounded. 1 litre Coke bottles are the strongest plastic bottles I know, perhaps strong enough not to collapse during the pumping (it is air pressure against rubber pressure plus the pressure of my hand to keep things tight). I can then use epoxy to glue a suitable valve into the original opening.
- Fat candle with a hole in the center. I could perhaps even seal the valve with wax.
- A plastic water conduct with an adapter to a much smaller pipe, where I could attach the valve.
I think, I will use a reasonably big plastic pipe that can be pulled out of the balloon smoothly. Perhaps I can use the upper half of a coke bottle to reduce the diameter, then glue the valve to the screw cap (which apparently needs to have a hole). As a side effect, I will have the basic hardware for a water-rocket-launcher š
In order to close the balloon temporarily (until I get in), I have a large clip that came with a rubber stretch band. It should work. But I have to make sure, the edges are smooth.
Well, that's all for tonight. I won't make any progress until Friday or even Saturday, so stay tuned, if you are interested.
If you have any ideas, suggestions or questions, let me know here.
