I just realized that i never posted my spanking-machine here, did I? But it's never too late...
it works like this:
- the arm is held in place by the electro-magnet
- the stepper-motor tightens the bungee-cords to the chosen level
- the stroke is administered when the magnet is turned off
- to arm again, the motor releases the bungee-cord and the wheel is pulled back by the red rubber cord until the arm is caught by the magnet
the picture shows the first iteration. The red rubber cord wore out quickly and I replaced it with a spring, but most of all, the machine broke all canes after a few strokes, so i'm using Delrin rods now which work awesome!
The machine can be controlled online and my Mistress and i had a lot of fun with it, but it always hit in the same place, which caused my skin to break pretty quickly. I could mitigate it a bit by moving around, but that defeats the idea of being helplessly bound while I'm spanked.
Then i found a motor-cycle lift that had exactly the right size and equipped it with another stepper-motor. Now the height can be adjusted from my upper cheeks down to the mid of my thighs (ouch!).
To give you an idea how effective it is, this is after only 30 strokes, starting at 45% and ramping up to 70%...
When I'm bound to the spanking-bench (also equipped with online-controllable electro-magnets) and blindfolded, i can hear the motors, but never know whether it's getting armed or going up or down. When the stroke is released, it's almost noiseless. Just a clack and a swish and while I realize it, it has already happened...
Hi there, I've recently been thinking about doing a self-bondage session where I'm forced to watch videos through a VR headset. Currently struggling to find a series of videos to fit the task. If anyone has any ideas for my session or links to videos, that would be so much help. Thank you.
There was no putting it off, I had to get the ropes out and undertake a more stringent self-bondage session. To add a new element to the ‘look’ of my session, I also decided to give my wig a test run.
Equipment:
x2 Tan pantyhose suit (no hood or gloves)
Gloss tan tights (Aristoc I think)
Wet-look Leotard
Corset
Skirt
Stockings
5inch heels
Long Lycra gloves
Ring gag
Bra and silicon breast forms
Large butt-plug
Rope
Wooden bar stool
The session: I was still nervous about an unexpected return by my GF, so my self-bondage was not going to include a timed release, but I did want to try out some different things. I was still wearing my bra and breast, but the penis butt-plug was replaced by my largest plug – I’m always surprised that once I’m ‘in the zone’ this plug goes in so easily. I also quickly tucked away my cock and balls (practise makes this easier each time) holding them in place with a combination of the two pantyhose suits. Over all that I pulled on my favourite pair of glossy tights, with their control top ensuring everything stayed in place.
My next clothing item was what I had always considered to be a failed purchase. It’s a turtle-neck wet-look leotard, but it’s too small and come sup short in the body length. This means I can’t fasten the crotch and so even though it always felt wonderful over my chest and looked great I could never figure out how to wear it. For this session I wondered if it could be used as a simple top, so gave it a go. To help hold it in place (and because I’m becoming a bit of corset wearing fetishist) I tightly laced my corset over the top.
To complete my outfit, I slipped into a short skirt (‘rescued’ from one of my GF’s periodical clear-outs), eased into my heels, covered my head with a couple of pairs of stockings and donned the wig. I was worried that the wig might slip, so used my ring gag to try and hold everything in place.
To be quite honest I quite liked the look.
Time to add rope, and I had a fair supply to play with! Nothing overly complex with my bondage, just lots of loops around my legs and cinching them tight (including the top of my thighs, hidden under the skirt)
I added a few turns around my waist, though being over the top of my tight corset they didn’t feel very strict! I bound my arms to my body with more loops of rope, cinched tight.
On went my gloves (I struggle to work the rope with them on, so leave wearing them for as long as possible) and I finished my bondage with a simple, but tight, wrist tie using a ‘figure of eight’ technique plus a final cinch to secure everything in place.
Oh my, that felt good! I revelled in my helplessness and posed for the camera as it clicked away taking shots every 30seconds.
What went well?
The ‘too small’ leotard worked surprisingly well and reprieved it from the charity donation fate I had planned for it. It did look a little untidy until I covered it with the corset and skirt. Looks like it will be a ‘keeper’ now.
Tucked and plugged – this might just be personal taste, but I’m starting to become a big fan of combining a large plug with a decent cock and ball ‘tuck’. There is something very attractive about the smooth look the tuck produces and I LOVE the feelings I get when bouncing up and down on the chair (or any other object) trying to gain some stimulation from the plug. I have managed to cum in this position (not in this session) and the feeling is incredible – something I plan to experiment with more and more if I can find the time. For the record, I still love having a rock hard erection to play with, it’s just that this is different in a good way.
Corset wearing is now my very favourite thing and I will write up a separate piece on this subject, but for now I will say that the thrill of pulling those laces tighter and tighter, restricting movement and breathing, is just so amazing to me.
Bar chair – this worked surprisingly well and is a good change from my usual chair. The added height makes applying ropes a little bit easier, whilst once I’m helplessly point the height become a challenge to keep my balance when I fidget and move about.
What could be improved?
The skirt was great, but it is quite thick and so very warm to wear. I shall be looking out for a similar length skirt that is lighter and easier to wear for a longer session. I think I would still like on that I can belt in place, but might consider a Lycra one too.
My boobs are too small or else my chest rope-work needs improving! I wanted to create an ‘above and below’ chest rope bondage, using my boobs to keep the rope loops apart. However, you can see in the pictures that the ropes moved together into a single band – still very tight, but not the look I wanted.
Adding a delay to my release – I deliberately didn’t include a delayed release in this session, but I will add one to a future chair tie like this.
Another fun session completed, with my arousal levels now through the roof! I needed to take a break to complete a few ‘chores’ around the house and to download the photos I’d taken, but my head was buzzing with plans for my next challenge.
MJ
Ps. I also have a video of this session - would you folks be interesting in seeing it?
This session was my first chance to really try out my new Zentai suit and the leotard/single-glove outfit. Personally, I lay all the blame for this outfit at Ra’s door, it was his championing of ‘A Huge sale on at AliExpress’ that finally broke down my resistance, leading to a number of impulse purchases. Two you will see here, but the third although massively sexy is too small for me (even in it’s 2XL size) – oh well… some you win.
Equipment:
Nude Zentai suit with penis sheath
Leotard with single-arm glove
Lycra body-control top/dress
Cock rings (from chastity cage)
Ball-gag inside knee-high
Knee-high
Harness ball-gag
Ring gag
Lace panties
Bra and silicon breast forms
Penis shaped butt-plug
Handcuffs
The session: I wasn’t planning any bondage for this session, but as soon as I slid the butt-plug inside me I couldn’t help but reach for my gags and handcuffs, adding them to the pile of clothing already piled on my bed. False boobs went on, inside the bra, then I zipped myself into the suit and added the cock rings.
After a long sabbatical from anything remotely fetish related, I think you can tell that I was enjoying myself.
No time to waste so on with the leotard to see if it lived up to expectations.
The leotard has a crotch zip which seems to be more biased to female anatomy, but as you can see still worked for me.
The single arm/glove is attached to the leotard at the neck and has a zipper (for dual person play I guess) but the material is stretchy enough to leave the zip closed and slide my arms inside, one at a time. It felt very comfortable when I was ‘gloved’ and I could resist striking a few ‘poses’ for the camera.
I was having so much fun that I imagined what it might feel like if I was properly bound either in a hog-tie or face down and spread open… phew I was enjoying those fantasies!
Time to try a change – off with the leotard and on with a tight body-shaper top that doubles as a very short, sexy dress, plus some lace panties that appealed to me for some reason (and I was teasing @bondagetom1 too)
I was messing around with gags, trying to decide which I preferred and imaging being bound. The harness gag was tried first; it was cheap and is now worn out, with stretched faux leather straps making it too easy to slide out of, though I still love the feeling of it tightened all around my head. The ring gag was next: this was suffering a similar fate, with stretched strap and all too easy to dislodge if I wanted to. It still makes me feel very ‘vulnerable’ with my mouth help open for anything to be inserted…
The frustration of the first two gags failures was driving me to distraction and so removed the cock rings and quickly ball-gagged myself, sealing the gag in with knee-high over my already encased head. The knee-high prevents removal of the gag without my hands, it’s impossible to ‘rub’ or ‘spit’ the gag out of my mouth, plus the elastic nylon ‘forces’ the ball back in whenever I try to eject it from my mouth – nice! I cuffed my hands and yes, I know – should have been behind my back, but I was having fun!
I was playing with myself, but without a condom over my cock an orgasm would make a mess, so self-control was the order of the day – all very frustrating but good training and building the arousal even more!
What went well?
I was worried that the Zentai suit would be too big, but I found the fit to be just about right. Maybe it could have been a bit more ‘tailored’ but for the price I’m not going to complain. The sheath is a bonus and I hope to be able to make more use of it in future sessions.
The leotard was literally a last-minute impulse buy and I’m so glad I got it. I love the feel of the single-glove when I’m in it.
What could be improved?
The single-arm is easy to get into, but also easy to get out of. I’m sure I can work out something to add a degree of difficulty to my escape – initial thoughts include a simple waist strap arrangement to pin my arms to my back and a metal D-ring sewn onto the end of the ‘glove’ to enable me to draw my arms down/up/away/in as wished. Watch this space – my mind is buzzing with ideas.
I seriously need to invest in some new gags or find a good DIY pattern to build some from. I love the idea of a head-harness with chin-strap and some better straps/buckles. I’m sure I can fabricate something out of nylon – anyone out there got any suggestions or experience?
Ring-gag wise I would really like something that was more of a tube, also with chin-strap or similar to prevent easy removal. In the perfect world I would have a head-harness with various types of gag I could attach (ring, ball, tube, penis – you get the picture). I know you can buy these, but they are quite pricey and I love doing things on a budget if I can!
And so ends the first of my 2019 Home-alone sessions – I’m nicely aroused and desperate to try some more serious self-bondage that I know will interest @bondagetom1 and others, almost as much as they will torment me.
I was brainstorming last night, as I usually am, and I happened to think about self-bondage that you can't get out of while you have an erection. Have any of you ever considered this? What are some ways to build such a system? Would any of you attempt such a thing?
When I'm in self-bondage, I'm usually able to have 3 orgasms in a row before I feel like I'm done and the erection is lost. But even still, I can get out whenever I want. When my girlfriend binds me, she forces me to have multiple orgasms before she lets me out so this would great way to be in that predicament while playing solo.
Hi,
I've been experimenting and refining a rather special leather audio hood.
I have used the Fetters Audio hood as this is strong and serious! (and equipped for headphones).
The objective... Loss of sight (already provided)... Background (quality sound/noise) eg music, a terrible TV show, white noise...
...This background sound is then silenced at the moment my mistress speaks (into a tiny lapel microphone)
It all sounds easy...? but perhaps not...!
You want to be without trailing wires for sure.
So you could go portable radio/walkie talkie with ext headphones...
You can do better with Bluetooth. There are loads of tx/rx devices with optical and mic inputs allowing use of tv or hifi etc
I have finally settled on high quality motorbike rider to rider coms. A little pricey but fab!
Totaly helpless... You see nothing! You hear just noise (which you stop noticing) or worse still music or tv you hate... Until a powerful strict voice cuts through with menace. And you cant even place where from... In fact she may not even be in the room or the house!
Total control
One of my most recent fantasies is to be bound in a straightjacket, gagged and sensory-depriived, chained to a wall and left like a slave.
Much like this:
This session combines several of those elements and stands as a (failed) attempt at a timed inescapable bondage.
My attire: thick blakc pantyhose ripped at the front and a shiny blue bycicle suit, in which I cut and sew a large opening to expose my genitals. On top I was wearing a steel chastity belt ( I wish it had a penis plug) and a D-shaped shackle as a ball stretcher, the first time I tried it.
On my head, in order: earplugs, an old swimsuit cap, a red faceless lycra hood from a broken zentai suit and this: https://www.amazon.com/Strict-Leather-To...B0076COT6G.
I like the concept of this hood very much, but it's quite a pain to lace up tight and often I just haphazardly tighten it and just buckle the collar. This turned out to be a small mistake, more on that later.
Moreover, the blindfold can be slid off the eye holes by rubbing your head against a wall. I'm planning to river a belt on my forehead ot keep it in place.
Here is the main bondage tool: my own straight-harness, all tangled up.
This time I tried a recent addition: instead of using the elbow straps to secure my elbows to the waist loop I devised a pair of shackles (two large dog collars) and two straps pulling the shackles towards a ring at the back of the harness and then looping at the front to press my arms againt my body.
This way there is a single buckle securing your elbows, which ideally sits central on the chest and out of reach of struggling hands.
I would tie my legs and knees with collars and carabiners, they were out of frame.
I relied on the computer tray release as a primary escame method, attaching the keys to the padlocks to a weighted strap which falls down as the tray is opened. The timer is randomised between 60 and 90 minutes.
The secondary release was another set of keys frozen in ice.
I also tried a new camera setup: using this software I took pictures every second from two different webcams: one integrated in my laptop and another dangling from an overhead strap, the same one that keeps the primary keys out of reach.
The laptop wasn't tilted down far enough, and I ended up recording mostly my bathroom door.
Donning the harness:
Then wearing the swimcap and red hood, and securing the armpieces. I had already fastened the collars on my elbows.
At this point I secure my legs together.
Doning and tightening the hood as best as I could, the gag was inserted and the blindfold rested on my forehead.
Chaining the collar to the wall
Wrapping the outer straps around the collars (through both the D-ring and the buckle) and loosely strapping both at the front. Both straps are secured via carapiners to the D-rings on the collars, threaded through a ring at the back and then out and around my arms to the front, where a buckle holds them together.
Only one carabiner is secured to the D ring at this stage because I need some elbow mobility to make adjustments and pull down the blindfold, which I do next.
It was now that I realised I couldn't breathe so easily: the loose hood was rotating upwards for some reason and the nostril holes were sliding away from their position. Plus my nose was a bit clogged..
Better safe than smothered: I removed the gag.
Undeterred, I complete my imprisonment.
Threading the padlocks through the palm loops, securing the left arm and tightening the chest strap
The last padlock goes in and that's it!
the rush is palpable, my cock grows and throbs from within its cage, pulling the ball stretching shackle and tugging my testes. I feel every pulse asnd it's amazing.
I roll face down and on my right side since I realise the chain might wrap around my neck
Tugging on the chain. It could have been a bit shorter, but I'm not going anywhere for sure!
At this point, I heas a noise through my plugs, sounds vaguely like my telephone. I then think that the next event might be somebody walking in (they have the keys to my apartment) and find me trapped like this.
I panic, rush to the iced keys and discover that the ice has weakened enough that I can crush it with a single hand.
I obtain the keys to my freedom, and that's it!
Time in bondage: ~ 32 mins
I took care of the "nuisance" and then had a go at another session - part two 2 coming soon.
Debriefing:
I really need to practice lacing up that hood
I could have slid off the blindfold without much hassle but I decided to play along.
without the gag in, it's easy to peek down through the mouth hole from within the hood
I, however, was kind of glad that I could peek down since I tried for the forst time thae DIY ball stretcher. My scrotum was a bit dark(as expected) but not too blue ot make me worry about accidentally castrating myself. I kept it on only for an hour and a half or so, anyway.
The bare-naked arms plus the pantyhose allowed me to cool off and not sweat much during preparation. If I add latex into the mix I'm afraid I might not bear 1h+ worth of sweat, usually I end my sessions much sooner.
I need to work more on the ice part - I shouldn't have been able to retrieve the secondary keys so easily. I used a plastic shot glass and left it in the freezer for almost three hours. Suggestions?
All in all, a nice test of new materials and techniques and an enjoyable, although curtailed, session of captivity.
I want to do this in a dark basement now!
Open Thread
I'm working on a website that allow anybody to control the slave that I am. It's still work in progress, but it's getting there. My idea is that any one can submit a scenario and I'll follow it according to the Master/mistress command. The result can be seen in different way such as video, picture, live skype, etc...
Would love to have feedback about it.
I'll start doing this around the end of June, but website is already online and can already take order.
Looking forward for creative and cruel a mind to see what they will come up with.
Here is the link for the moment (might change later):
For quite a while, tieing my hands crossed behind my back is one of my favorite methods. This is a very interesting tie, as it is fairly easy to learn, feels pretty tight and - depending on a few details, you can either undo it with your fingers, need a door-handle or a similar hooking-device (door-knob won't work) or you have to cut the rope. And, if properly done, it will leave some rope marks for a while. It seems, that I haven't described this method, so here we go:
You need a rope of about 1 m length (a bit more than a yard). For starters, a stiffer type of rope might be nice, because it will be easier to undo the knots.
For safety, make sure, you have some sort of fixed hook (such as a door-handle), that you can slide between your wrist and the rope, preferably into a single coil of rope only.
And have a pair of safety scissors (the ones that are dull at the ends).
TIEING YOURSELF UP
Step 1
find the center of the rope, hold it with your left hand (if you are right-handed).
Grab the right strand with your right hand, about 20 cm below the center. Twist that strand clockwise while making a bight, put it on top of the center.
Hold this with your right hand now.
Grab the left strand with your left hand, about 20 cm below the center / crossed rope. Twist that strand clockwise (again) and put it on top of the other bight.
Take the rope at the ends of the bights and let it hang down.
If you like to check, if you did it right:
Follow the right strand. It should come up to the right half of the bights, behind the other rope, then cross the other end, loop around clockwise, cross over itself, then under the other end, loop again, cross the first loop somewhere underneath, cross the first strand underneath, cross the other loop above, then dangle down on the left side (poo, hard to describe that in English) - well, look at the picture.
Step 2
Adjust both ends, so they have the same length. Then adjust the loops to a size, which allows you to put your hands through - one from each side.
I suggest, you practise with hands in front first... (what comes next, that is, the other part should be done in front of you anyway, why bother making it hard?
Now, put one hand through, then grab both open strands to make sure, you find them behind your back (still useful, if you do this in front of you). Put your other hand in the loops from the other side.
Grab one strand with each hand, as near as possible to the loops, and pull tight simultaneously. I never figured out, which strand should go in which hand, it makes a difference. It does not really matter though, one way, it tightens better. While this already feels like tied hands, it is not secure. With some wiggling, you can get your hands free again. Check, if both strands are still about the same length. This only matters, if the rope length is just right. With more length, this gets less important.
[SECURITY OPTION #1] Tie off with a simple overhand knot now - makes escape harder!
Step 3 - everything is done behind you, meaning, not in between hands and back, but really behind. If you are doing this in front for practise, you should actually perform the following actions between your hands and your belly. Actually, this is much easier, because it is the natural direction, in which your fingers will work.
With each hand, pick up the strand that this hand has previously pulled tight. It is the one, that slightly bends towards that hand.
Now wrap one strand around both wrists twice. Check in the mirror, if you aren't sure, this is very confusing at first, if you cannot see it.
Hold it fairly tight there.
Wrap the other strand around both wrists twice, but the other way around.
In the end, you should have the strand of rope in one hand, that comes from the wrist of the other hand, and vice versa.
While pulling on these ends, wiggle a bit, try to get rid of slack around your wrists.
[SECURITY OPTION #2] Only wrap each strand once, pull tight, then tie off with an overhand knot. This will make the door-handle-release ineffective.
Once you are happy with the tightness, tie off with an overhand knot. This is the moment, when you finally know, if your rope is really long enough.
The knot should be placed on the rope. This creates some friction which keeps the knot together, if you hold your hands still.
If you want it really tight, wiggle more, pull the ends etc. You will be astonished, how much slack you can create after a while, even if the initial tie feels really tight.
Feels secure already? Well, after a while, it will come lose and you will be able to get free.
Step 3 - point of no return (ish)
Now, prepare a second overhand knot, make sure, the first one is still tight, then close the second knot.
Security depends a lot on how you tighten the last knot. If you pull the ends slowly, no matter, how hard you pull, it will be undone fairly easy. Instead, if you yank really hard, it will get pretty tight.
[SECURITY OPTION #3] Use a longer rope and do as many knots as you please. If you get a "knot-rope", which is long enough, you can even make knots into that rope. This is a useful method for delayed freedom, if you are able to undo the knots with your fingers. If not, don't bother, because it won't resist other release methods.
RELEASE METHODS
The hardest option is to work the knots open with your fingers. It is definitely possible but might take some time. Very short fingernails make it harder. Very long ones might make it impossible, because they could break (I have no experience with that). Unless your fingers are too long, you can easily reach the knot, while it is located on the other wrist. With simultaneous rotation movements of both hands (back and forth obviously), you can move the knot a bit to get it into a better place. You can also grab the open strands to move the knot a bit.
The easiest way is to go to a door with a door-handle. Slide the door-handle into one of the loops, that you created by wrapping your wrists in step 2 and pull hard. This should create enough slack to get out one hand. Repeat, if necessary, and get rid of all loops from step 2. Now you have to wiggle a bit to losen the first two loops and you are free. once free, you can undo the knot and the rope is ready for the next session.
It is a bit harder (especially on the rope) to use scissors. Best cut next to the knot, because that leaves you with the longest possible remainder of rope. It also helps to find the right spot, in case you have to take a break. If one cut doesn't do the trick, keep cutting the same spot. Even with completely dull scissors, you will eventually make it. The rope will be too short to be used the same way again. So try to avoid using the scissors.
ADVANCED SECURITY OPTION
For this, you need a longer piece of rope. Proceed as before, make at least one overhand knot - the previous final knot is not really necessary. Then lead one strand over your forearms from behind towards your back, and one the other way. Then find out, where to place them to create the additional loop crosswise around your wrists. Tie off with two overhand knots. Now, you have one loop around your wrists, secured by two knots. This means, this knot stays where it is, probably somewhere on the inside of your wrists, where it is very hard to work on it. The door-handle release should still work. If you have tied off the original version with two knots, you have a bit more work or have to resort to cutting the rope.
I am going to post this now, then make photos and edit to add them. If you can understand, what I mean, before I have uploaded the photos, try right away 😉
OK, now with pictures. By the way, I am wearing the latex skater dress, that i got a few months ago.
A final note: This method is not exactly predictable. For the sake of getting it done, I just did it step by step, even though crossing the strands before wrapping them around my wrists (step 2) felt wrong. You can see on the image, why. I shold have switched the ends to the other hands. This is actually the first time, I see this process step by step, I only had a photo of the finished product. But predictability is more important concerning the quality of the knot. I am confident to get make a knot that I can undo. I do this, when I tie myself up inside a sleeping bag for example. Pulling the knot tight very gently always does the trick (so far - but that is part of the madness - release is still possible by destroying the bag). Often I just tie off randomly and see later, if I can undo that. I always have the door-handle... Yanking the knot tight hard often works - I need the door-handle to get free - but not always. Especially, when I am annoyed, I am pretty good at undoing knots. Same for the advanced security option: Sometimes I can undo the knot, sometimes I can't. This means, if I do two overhand knots at the end of step three, I need scissors.
The last few weeks I have been constructing a couple of kinky ideas I've had for a while. I thought maybe some of you might be interested in these projects so I'm going to share them with you.
The first one is simple to describe. It's a remote operated switch, designed for home automation, that I've setup to control a vibrator.
The physical setup of this device is super simple. You take an extension cord and cut it in two (not while it's plugged in obviously). Strip the wires where you've cut the cord, then attach each half of the cord to the Sonoff device. It's clearly labelled with input and output.
After that comes the more advanced setup. The way I'm using it, I needed to install 3rd party firmware so I can send commands to it directly from my computer. Straight out of the box, these devices only take commands from the company's cloud service. Basically I cut out the middleman. In order to facilitate installation of this firmware, I had to solder a header socket onto it and use yet another device to flash firmware to it over usb. Once the new firmware is installed, the device can be given credentials to access your home's wifi at which point it will be assigned an IP address over DHCP. After you get that setup, it will automatically turn on when plugged into the wall and listen for commands sent through http. In other words, it has a built in basic web server and you can send commands to it through it's web interface.
With the device configured and listening on my network, I set about looking for ways to send the commands automatically from my PC. I ended up using a program called AutoIt which uses a scriping language to write unsophisticated, stand-alone programs. There is even a visual interface editor so you can build a window with customized buttons. The way my device is intended to be used, I connect my vibrator to this device and attach the business end of the vibrator to myself as described in another thread. With the Sonoff device controlling the vibrator, I use my phone to remote control my PC and turn the vibrator on full speed until I get close to orgasm. After that, I hit the button again (on my phone) and switch modes so that it cycles on and off, semi-randomly, so that I may stay edged a while. Riding the edge of an orgasm is difficult using only a math algorithm and no sensors, but it is possible. Although not yet implemented, the idea is that the device edges for a predetermined amount of time and then it switches on full blast after the time passes to allow the orgasm to occur. It wasn't perfect and certainly still needs work but with some tweaks to the math, I think it will be a great addition to my kit.
The next kinky project was a bit more involved to produce. It still isn't quite perfected, but it definitely shows promise. If any of you have ever fantasized about directing your orgasm into your mouth while you're having it, then you're going to love this next device (when it works properly). My use for this is as a means of "punishment". Basically, I don't want cum in my mouth, so being connected to this makes me want to try my best not to have an orgasm. Since I do not want cum in my mouth, I consider this as a means of negative reinforcement in the predicament. I'm not sure if this is the case for other people (though I suspect it is) but for me the more I try not to cum, the harder and longer I end up cumming.
In the picture, you can see an external catheter that is loosely attached to a bit of tubing. The other end of the tubing is attached to the inlet of a 12VDC pump. The outlet of the pump is connected to the head harness and breathe through gag with another bit of tubing. The rest of it you can see is just the 12VDC power supply. That's the basic premise of it. What isn't so obvious is everything I had to do to get everything attached like that. I bought several different sizes of tubing for testing purposes and had to design and 3d print a couple of custom parts. Additionally, that head harness is made from combining two different gags together.
There were a couple of issues with this when I tested it yesterday. The first issue is that external catheters are not made to go on erect penises, they are for flaccid penises. If you intend to make anything like what I have made here, I recommend buying the condom catheters to fit yourself when erect. It was not easy getting everything in place, on me, because of this. Those condom catheters aren't as stretchy as a regular condom. The second issue arose at the time of the orgasm. In my haste to use a pump with higher output power and speed, I neglected to consider how that might affect the slower moving fluid in the tubing. The diaphragm pump worked but too well. It ended up, sort of, whipping/frothing the cum and spreading it evenly over the length of the tube rather than moving it up and out. The result is that -none- of it made it out the end of the gag... at least not noticeably. When I took everything into the bathroom to clean it out, I turned it on and it did sort of spray a little out into the sink. The diaphragm pump just pumps too fast and has too small of a cycle volume to move fluid of that consistency without frothing. I originally bought a peristaltic pump for this but thought it might be too slow to be effective but I suppose next time I will use it and see what happens. Additionally, I'm looking online to find some super-hydrophobic tubing or a way to make my tubing super-hydrophobic. That would certainly improve the odds of achieving the desired outcome.
I welcome any advice or questions any of you may have.
