In this part we will talk about using PVC coated steel cords and small padlocks. Such cords can be sewn-in/built-in/glued-in the garment, can be worn on top of the clothes as collars, cuffs or belts or keep the zips closed. Suitable for bondage, self-bondage or to spice up your daily life.
Just to give you some examples of what this small neck-cord can keep on: swimsuits, catsuits (bondage catsuits, suits with built-in dildos or plugs), bodybags, hoods (think of built-in gags and blindfolds), masks, actually any piece of clothes with a zip in the neck area or a collar.
A shorter version for ankles will not allow to get rid of shoes or boots (e.g. with high or very high heels).
Two methods of crimping have been covered.
From left to right: heat shrink tubes, 3.5mm PVC coated stainless steel cord, 6mm² cable crimps
Squeeze a crimp with a crimptool (<3€) or pliers to form an oval-shaped hole.
First method
Measure where the crimp will be located
Mark the location
If the crimp is to narrow to accommodate two runs of the cord, remove the PVC coating from the place where the crimp will be located
Squeeze the crimp as tight as you can
You can remove the plastic from the crimp
Put on heat shrink tube
And warm it up with, for example, a hair-dryer. One loop is finished.
Second method. Remove the plastic from a crimp or use a cable end crimp (more difficult to find for such a diameter). And squeeze it from the sides a bit.
Make it wider
Now the crimp is wide enough to house both runs of the cord. No peeling is needed.
And squeeze it… Then heat shrink tube.
The finished locking cord.
It can be built into the collar of, for example, a water-polo swimsuit. Just two small holes are needed to thread the cord through the collar.
Or the cord can be used to keep the slider up.
The padlock is threaded through the biggest hole at the base of the slider.
I purchased a lockable dress from ebay. The dress zips in the back, and at the collar, it has two D-rings attached to the garment on either side of the zipper, anchored with strong black webbing.
You can undo the zipper, but you can’t undo the collar, then. A luggage lock is sufficient.
There’s a couple of variations on this. Search for locking dress, lockable dress, etc.
Also, Ellie has a pair of shoes with a locking ankle strap, also something you can find on eBay.
Thanks for the idea!
I AM LOOKING FOR A WAY TO LOCK ON SOME WOOL PUNISHMENT SHORTS FILLED BURRS, FOXTAILS, OR NETTLES. PLEASE HELP
CONRAD.
Is it possible to device any effective chain locking mechanism of a DIY lockable Pantyhose or BodyStockings with crotch opening?
Yeah, I thought about that. Have some ideas, but no solution yet.
I have one suit I would like to make lockable: /eq/lycra/sless_leo.php
That is a great idea. I have many uses for something like these.
I purchased a lockable dress from ebay. The dress zips in the back, and at the collar, it has two D-rings attached to the garment on either side of the zipper, anchored with strong black webbing.
You can undo the zipper, but you can’t undo the collar, then. A luggage lock is sufficient.
There’s a couple of variations on this. Search for locking dress, lockable dress, etc.
Also, Ellie has a pair of shoes with a locking ankle strap, also something you can find on eBay.
Thanks for the idea!
I AM LOOKING FOR A WAY TO LOCK ON SOME WOOL PUNISHMENT SHORTS FILLED BURRS, FOXTAILS, OR NETTLES. PLEASE HELP
CONRAD.