I need your help to carry out my selfbondage session.

I have fantasized about a session where I would be tied to a chair using time release and there would be a container full of ice cold water above me. Then at some point the water would fall on me until the i could release myself. But my problem is that I haven't figured out how to implement that, so that it falls on me at some point.
I have thought about a hole in the bottom of the container and I would freeze the bottom of the container and when the ice melts, the water would be able to flow over me.

But the question is, would you have other ideas to implement that?

Icecubes a nylon sock and you have what you want.

Icecubes a nylon sock and you have what you want.

I had thought about that also. But i want that there are coming more water at short period at time to make a shock effect.

Try the following:

   

The rope near the bottom at the left is to make sure that the whole bucket does not fall down on top of you.

Try the following:



The rope near the bottom at the left is to make sure that the whole bucket does not fall down on top of you.

Thanks for the idea. I have to test that. So simple idea 😊

I use a frozen enema (water with ice) released by an DIY electromagnetic clamp. A soft rubber hose is clamped between two rods held together by an electromagnet with a time delay. After a set time, the magnets release the hose. You can use a similar mechanism.
The second option is to bend the hose and let it freeze into an ice cube. After the ice melts, the hose will straighten and the water will flow out.

[Like Ra]

I use a frozen enema (water with ice) released by an DIY electromagnetic clamp.

I used a kinda "ice in sock" method.