Built an Edging/Orgasm Denial Device

[jamesdeville]

Hi,

I'm new to this community, but am into edging and to some extent, orgasm denial. With this in mind, I have built an edging/orgasm denial device and thought I'd share in case anyone wants to build something similar. It's designed for men at the moment, but I think it could be easily adapted to women.

It works like this....

There is a vibrator that attaches to the head of your penis and a butt plug. The butt plug has pressure sensors on it, and when you get particularly turned on, or are close to orgasm (where your PC muscles contract) it turns off the vibes. This way, it takes you close to the edge then stops, and each time it does that, it waits longer to turn on the vibes again. I wish I had built in an override button!

Anyway, you need a little tech know how, (but not much) to build it, and it works really well. I saw lots of forum posts which where people were struggling to build one so I thought I'd post here. Let me know if you want details.

Best Regards!

[Tinker D]

Sounds interesting. A butt plug with pressure devices to turn off the vibs.
One can use a SST or a 555 ic to control the vibs.

Only one problem I can see, in my case, once I get close and my PC mussles kicks in, it's too late. Here it comes and nothing is going to stop me from making that creamy goodness.

But I like your idea.

[Tinker D]

Oops, I almost forgot.
Welcome. 😊

[BoundWolf]

Anyway, you need a little tech know how, (but not much) to build it, and it works really well. I saw lots of forum posts which where people were struggling to build one so I thought I'd post here. Let me know if you want details.

I'm interested.  Are you running it via a computer, or a microcontroller/Arduino-type device, or just as a circuit?  What kind of pressure sensors are you using?  This is one of those things that I've had in the back of my mind as something I should make someday, but never actually got around to it.

[Like Ra]

If I remember correctly, there should be a related thread - someone has built or was going to build a similar device.

And yes, @jamesdeville, welcome on-board! 😉

[jamesdeville]

Sounds interesting. A butt plug with pressure devices to turn off the vibs.
One can use a SST or a 555 ic to control the vibs.

Only one problem I can see, in my case, once I get close and my PC mussles kicks in, it's too late. Here it comes and nothing is going to stop me from making that creamy goodness.

But I like your idea.

That's true, when you get to the 'point of no return' there is no stopping it happening! That said (and it's a small sample size of 1), PC contractions seem to happen throughout the period of stimulation (pre orgasm), particularly when you are most enjoying the sensations - and that's where it gets fun, as it switches off the vibe at that point. It uses an Arduino, so it's programmable, and I have found good results with it switching off the vibe for longer and longer periods as I'm getting more turned on.

[jamesdeville]

If I remember correctly, there should be a related thread - someone has built or was going to build a similar device.

And yes, @jamesdeville, welcome on-board! 😉

Thanks for the welcome, and I'll have a look for the related thread!

[jamesdeville]

Anyway, you need a little tech know how, (but not much) to build it, and it works really well. I saw lots of forum posts which where people were struggling to build one so I thought I'd post here. Let me know if you want details.

I'm interested.  Are you running it via a computer, or a microcontroller/Arduino-type device, or just as a circuit?  What kind of pressure sensors are you using?  This is one of those things that I've had in the back of my mind as something I should make someday, but never actually got around to it.

Yep, it's an Arduino with a small force-sensitive resistor attached to a neck of a butt plug. It reads the contractions and depending on how you program it, delivers the vibes.

[Max515]

Use a heart rate monitor (bluetooth training smartwatch)?

[white_angel]

What about just using gravity:
Use a vibrating pad, like an orbiting sander with the flat surface pointing up.
Lay the penis on top of it freely. When you are near, you will likely get an errection, lifting the penis from the vibrating pad.
Orgasm denied, until the erection goes of... and repeat? 😊
Orbital sander is probably not ideal, as it vibrates sidewise, not perpendicularily to the surface what would be the best,
Maybe it could be adapted, like placing it on its side and fixing some flat suface to the side of the original moving part?