I see many latex zentais are priced around $300 and above. That would be quite expensive for me. I'm looking at around sub-$100, under $200, lower the better without compromising quality. Where can I find those?
Even though I'm lucky enough to have a wonderful wife that enjoys kink there are times when I still like to do things by myself. Rope work is one of those things that I'm better at than she is and I like to try things out on myself and show her how to do it. (Sometimes she runs wild with it and well then that is bliss.) Anyway, even though my passion is steel bondage and chastity I still love rope bondage and harnesses.
Recently I came across a safe way to an armbinder with self bondage and just rope. Here is a link on how it's done:
I had a wonderful 4 hour session with this last night combined with a chest harness, (use with hogtie), a crotch rope harness with hitachi tied on (thanks to Two Knotty Boys) on a timer so I didn't get bored and finished with a hogtie with a looped chain and podlock tied to rear of chest harness and ankle.
It was a wonderful scene that I'm going to have to show my wife when she gets back in this weekend.
Hi, my name is Alin S a.k.a Strapples. I am wading my way into the darker side of my body. I am autistic and I know that, I have severe sensory integration disorder, know that too. But I am also wondering if I might have some 'kinks'
I stumbled across this image on flickr from the Netherlands:
That's inner tubes for floatation, but intertubes by themselves could be interesting for bondage.
I'm new to the board but I already feel quite at home as I can relate to a huge amount of posts on here. Glad to see it's not just me that has my kind of thoughts.
Anywho. On with the topic.
No doubt a lot of you will understand exactly what I mean when I say that sometimes things work out better in my head than they do in RL.
And so, one of my latest thoughts revolves around a pair of latex shorts with a built in anal condom/sheath.
As an example: http://www.twistmyrubberarm.com/index.ph...173&cat=23 http://www.twistmyrubberarm.com/index.ph...243&cat=22
(If anyone has any links to more options, I'd be extremely greatful if they could pass them on!)
I've been trying to decide whether or not to buy a pair for quite some time and was wondering if any of you have had any experience with such a thing?
If so: How did you use it? What was it like? Did it work as you thought it would? Could you share some positives/negatives?
I normally don't mind splashing out a little when a thought occurs, but at the rate that I buy little things here and there, it all mounts up ...financially and physically. I'm sure you understand 😉
Thanks in advance for any answers and thank you all for being like minded and giving me the opportunity to explore my thoughts and ideas with you. 💓
/LLL
Hi Like Ra, today I was making a new post and I was uploading some pictures and I uploaded only 2 pictures then when I started to upload the third one the forum never loads again and appears a 500 Internal Error
After that I return to check the page and it's okay, so I write this post and maybe it's my internet connection, but I don't know. Thanks 😉
Been enjoying your site and all that goes on for a while, very good work 😊
I'm always a bit sporadic in both my own efforts and getting on-line, so apologies in advance..
I know madjack had a few issues with the thin bags, it made me think of my first experience with trying out Vacuuming - I found some industrial garbage compactor bags and promptly made off with one 😊
I'm 6'2 and you could have got about 8 of me into it! very strong too...put myself off by playing around! and discovered that I'm not too keen on having my face covered, even if there is no logical way a pipe could be blocked!
So tried a few combos of ideas, the latest one equates to...
1 digital plug timer
1 Polythene sheet 6mx2m (can get from a DIY/Garden shop, usually for ground cover)
1 pot of liquid latex mold stuff from a hobby shop
1 replacement dry-suit neck (from a diving supply shop)
duct tape
15mm plastic pipe
vacuum cleaner
this bit didn't work out too well but it's an idea
plastic T-Junction
8mm hose
inline valve from an inflatable gag
balloon (I used a condom, bit too thin)
So...
Took my 6x2 metre sheet and cut it into two 3 metre pieces.
Created a tube by overlapping longways about 15cms and duct taping the join, turning inside out and duct taping the join.
Taped the bottom, rolled a couple of inches and taped again.
Drilled holes in a spiral up the plastic pipe (about every 10cms) leaving 30cms not drilled - cut hole in the middle of the bottom of the bag, just big enough for the pipe and, leaving 20cms outside, pushed into the hole and taped it up.
Taped the t-junction to the pipe sticking out of the bag.
Got into the bag to see where my head would be - made a mark.
Took the dry-suit neck and placed where the mark was, drew a line around it and then cut out that piece from the bag.
Used an overlap of duct tape to secure the dry-suit neck to the bag, inside and out.
Then went over all 'seals' (duct tape) with the latex mold making stuff...left to dry.
I tied a condom, balloon might work but this bit is work in progress, to the 8mm hose and then kept wrapping strips of tape around the tube to make a kind of wedge. Stuck this into the top of the t-junction. The other end of the 8mm hose I'd attached one of those inline one way valves from an old gag/plug (can't remember which).
Partly that I did not want to be able to rip the bag...I folded a duvet in to thirds and placed this into the bag around the pipe. Just wanted to make a tube of the duvet rather than fold it in half and leave a gap..
Timer nearly set and left on floor next to head of bag...
Climbed in and pulled the top of the bag in, folded this in towards the middle and used a rolling pin to roll it back towards the top - effectively rolling the top shut from the inside, if this makes sense.
Reached out of the dry suit neck and adjusted the timer and plugged that in. Pulled my arm back through and pulled the neck over my head.
Good - in and sorted - oops forgot the 8mm hose...could manage to get that into my mouth via a bit of grappling through the bag...good.
Now I had a stop watch running too...this was the idea in my head...
a) Vacuum starts, 4 mins on timer
b) watch the stop-watch....
c) when vacuum about to stop - blow on the 8mm tube...inflate the condom and no air can escape!
What atcually happened = set the vacuum for 5 mins instead of 4...blew into the tube, inflated the condom and bang it broke...doh!
Plus = tight! oh I have some 'hickies' across my shoulders which might be tough to explain! and I could not move AT ALL. As the condom broke I kept the timer on 5 mins and just popped my head back in, arm out program timer, arm in, head out...trying a few positions - holding ankles like a hogtie is mean! Getting stuck would mean I could breath easily.
Bad = I really wanted to 'get stuck' and thought that the 'out' would be simply biting the inline valve to let air back in if/when I wanted but alas..
I did try the 'duct tape hood' and have that mounted inside, instead of the dry-suit neck but didn't like the pressure on my face, I stated to panic a bit and also it didn't fit with trying to get stuck without a vacuum running - as you can grip the pipe in your teeth and let air inside via the sides of your mouth.
Also i've tried 1 way check valves instead of the t-junction but they aren't designed for air so always leak air back in. So thus the new idea above. By the way - using the liquid latex around all duct tape works well.
All of the above completed using various stages of dress...finally settled on a pair of Kunert satin look 20's and a speedo high neck swimsuit.
Sorry it is all a bit rushed...got to run...
Did try to draw a pic to help explain the mess above 😊
![[Image: ab-14.jpg]](http://www.monkeyfetish.com/content/images/galleries/corsetarmbinder/ab-14.jpg)
![[Image: 4193508398_fb3039d916_o.jpg]](http://farm3.static.flickr.com/2779/4193508398_fb3039d916_o.jpg)
