Just a question, which there may well be a quick and easy answer to. There are tons of bondage shops online, but is there one that specialises in Self Bondage?
I've seen quite a few posts about people making their own bits and pieces, but with the exception of an Ice Lock made by Mr S Leather, I can't find anyone making Self Bondage items.
Am I not looking properly, or is it because it's dangerous, and you'd be sued if someone used it incorrectly etc?
Surely there are people out there (like me) who are not very handy or don't have a garage or workshop to make things and would love to click away merrily online and have something delivered (like that Ice lock) that will do the job...?
Hi all, I have not been on for a while but I have been having some great outdoor fun. Sorry to say my last water device left a bit to be desired and ice is just no good for me as melts to soon before I get out and about and having fun. I therefore came up with this little device, it works great and I will test it in the field tonight for the first time and give you all up date latter. Well here we go, I put in picture hope it is readable
Well at top on this length of batton, there is an eye to hook on first elastic band. Then there is a small elastic band to suit the job. then hanging on this is a small length of bar with an eye welded at each end. This bar passes through the two lower eyes and on the bottom end of the bar is a weak link, (mine is mad out of wool.) This weak link is what will be in between the two eyes when all the water in the bottle hanging on end of it has ran out.
The elastic band at the top; when the water is out of the bottle lifts the empty bottle till just the weak link is in between the two eyes then you can pull on the restraint and break this weak link
While there is any water in the bottle however the iron bar is in between the two eyes and going through the eye that holds your final restraint, so you can not pull the restraint out.
Now on top and bottom of batton i have two ties that I intend to tie the batton to one of the four trees that I use to spread myself eagle.
As a back up i will place a sharp knife at hands reach and if I need to i can reach out and cut the weak link.
If the week link should break by accident the the top elastic band will pull the iron rod up and free you. if the top elastic bad should breaks by mistake the water bottle will pull the iron rod right down and free you.
Now note i made the iron rod and put the two eyes on my self and i then ground the ends by the two eyes so as there is no way they can catch and will pass cleanly through the two eyes ever time. I have tested and tested. But mind you with the back up knife i will be safe any way but I do want to spend time tied up and not repairing my kit, so i tested it to hell and back and know it will work every time. I will post tomorrow and let you all know, how i get on
I forgot to draw in the eye that holds the rope that you tie your arm to, but i think you will all see that the eye goes in between the two main eyes. If any one has any question please fire away i will get back to you Paul
Ps don't forget to put hole in bottom of water bottle????
My old facebook account is deleted, so i made a new one! Just add Johnny Brown 😉 Are you still on facebook Likera? I'm trying to add you, but i cant find your account...
Good down clothing is quite expensive, cheap stuff often looks crappy. But quite a few people like the shiny appearance and feel of it. A bulky garment can encase you softly, I especially like bulky hoods, but not only.
I would like to collect links to websites selling affordable down clothing, starting with a link that I happend to find today:
http://www.tianyoutextile.com - Chinese seller, I like the windbreaker and the sleeping bag, and the skirt looks interesting too. No idea about quality and reliability, but I think, the prices are way below average, even the overalls are sort of affordable. Looks like these guys heard of Moncler. Correct me, if you think, that I am wrong.
* I am writing this using Google Translate, my language is Spanish.
Hi everyone! I recently discovered this wonderful site, full of suggestive pictures not only passionate about the world that encourages us, but also people who speak without fear and express what they really feel and enjoy.
The truth is that for years drew some fetish things, but by a common disinterest in the communities I was cool to stop. However I think here there may be someone they like.
These drawings are among his fetish, latex, hoods, panty poop and other nonsense. Anyway, I hope not to disturb anyone with these drawings n_n
This was a project I’d been planning for a long time, but I never seemed to get around to actually doing it – pretty much sums up many similar schemes and ideas of mine I’m afraid!
But, I finally did it and here’s how:
My existing enema plug was brought years ago and is OK, but not great. It’s a typical commercial product – looks and sounds great but never really ‘delivers the goods’ as they say. Originally it was a vibrating plug with a ‘ejaculating’ hand pump that fired a single bulb of fluid into the users ass. The vibration was ok but nothing special and the pump was next to useless in real play, the tube was much too soft and it’s position meant it frequently folded over preventing any fluid flow. The only good feature was the sucker on the base, which could be used to attach the plug to a surface and let you play away.
I’d already cut the electrical wire and remove the bulb from the plug – successfully using it many times for enema self-bondage sessions, but it was never quite right. The main issues remained with the tube kinking (wrong sort of kink!) and the plug being too easy to eject (even with a rope harness and layers of nylon/lycra over it).
The new plug would need to have a nice fat body (comfortable ‘fit) and a narrow taper before the wider base to prevent both ‘leaks’ unwanted ejection and ‘swallowing’ (or unwanted ‘ingestion’?)
My materials where:
- an old pen body made of tough plastic (not the brittle plastic ones)
- A used medical inhaler body (emptied of it’s mechanism)
- Plastic collar (from a box of bits it seem to collect)
- Plastic wine cork
- Drill, Glue and tape
…and it goes without saying that all items had been thoroughly cleaned before starting assembly and afterwards.
A: my old plug
- nice, but not good enough with a ‘neck’ that is too small short
B: cut wires and kinked tube
- tube is too flexible and the side connection causes problems with kinking. Cut wires to vibrator motor
C: kit of parts
- the basic materials
D: drilled
- hole through the body for my enema tube
E: part assembled
F: trimmed
G: Mk1 glued and taped ready for test ‘fitting’ – the addition of the plastic cork sideways is to prevent ‘swallowing’ of the plug.
This was almost a disaster – the plug slipped inside easily and the seal was excellent, however extraction was a real struggle. The lack of taper on the base of the plug meant I had to use considerable effort to retrieve the plug.
H: Mk2 finished
Tested and proved excellent in fit -added a crude but effective taper to make extraction easier. Proved to have an excellent comfort and seal during MJ-SB01/2011
I’m quite pleased with the results, though they are a little rough around the edges and need careful cleaning after use.
Proof that DIY can be fun, if in a somewhat specialised area😁
![[Image: Soy%2Btu%2BCerdita.jpg]](https://1.bp.blogspot.com/_0HXNmpCNJsw/TOQnyOeGzBI/AAAAAAAABdE/xuRtYgp7rL4/s1600/Soy%2Btu%2BCerdita.jpg)
![[Image: Poo%2BPoo%2BPrincess%2B%255BBeef-Bros.%2...1%255D.jpg]](https://2.bp.blogspot.com/-tXp74v-RO0M/TXgDyFITEaI/AAAAAAAAB5Q/nekC4ZUkw8M/s1600/Poo%2BPoo%2BPrincess%2B%255BBeef-Bros.%2BComics%2521%255D.jpg)
![[Image: %2528%2B%2527%2B3%2527%2529%2Bb1.jpg]](https://2.bp.blogspot.com/-jp_GAx_-or0/TW6Di9Xm9TI/AAAAAAAAB1M/5QhjBOloSPE/s1600/%2528%2B%2527%2B3%2527%2529%2Bb1.jpg)
![[Image: Me%2Bhago%2Bcaca%2Bencima%2521%2B-%2B4.jpg]](https://4.bp.blogspot.com/_0HXNmpCNJsw/TVMLZDxCruI/AAAAAAAABx8/RiOqKuQvI6g/s1600/Me%2Bhago%2Bcaca%2Bencima%2521%2B-%2B4.jpg)
![[Image: Me%2Bhago%2BCaca%2BEncima%2Brevestida%2B...-%2B04.jpg]](https://1.bp.blogspot.com/-jBbr6rVmH2U/TVNpmpu53II/AAAAAAAABzk/J0BOwCdw_NU/s1600/Me%2Bhago%2BCaca%2BEncima%2Brevestida%2Ben%2BLatex%2B-%2B04.jpg)
![[Image: rubber%2Bplay.jpg]](https://2.bp.blogspot.com/_0HXNmpCNJsw/TRAO2PGnDlI/AAAAAAAABkc/_j2K68mPN-A/s1600/rubber%2Bplay.jpg)
![[Image: Popman%2B%255BBeef-Bros.%2BComics%2521%255D.bmp]](https://1.bp.blogspot.com/-Nu5UHahS-Ik/TXgfuTWRXjI/AAAAAAAAB5o/tvdZ-wv3Lto/s1600/Popman%2B%255BBeef-Bros.%2BComics%2521%255D.bmp)
– the plug slipped inside easily and the seal was excellent, however extraction was a real struggle. The lack of taper on the base of the plug meant I had to use considerable effort to retrieve the plug.
