if i see one in public i try to chat to him to see if hes bi or gay.if he is i ask if he would like to come around my for a chat.and cuppa coffee.... in my mind is to suck his cock realy
I'm looking to add some good vibrations to my SB-sessions. I need a device for that. Do you know a device that has random settings or can easily be programmed for several hour sessions?
Or do you guys use one that is connected to the power grid so you can use a timerdevice on the outlet?
In the past I built several of these Venus 2000 clones. It wasn't easy, but finally I earned all the know how for it the hard way.
Finally, my latest model I call: "Venus Compact" and sell one, here: http://articulo.mercadolibre.cl/MLC-4226...ompact-_JM
Since I also have the original Venus 2000, I am able to equal its efficiency.
Its most interesting application is enjoying its stimulation on slow speed, while reading a book, viewing videos etc.
Hi, I'm David (crystal sometimes) love NYLONS. I'm 45 years old and married. as time goes on hopefully you will get to know me more, an see more of me π
Polite as I am, I'll do a short introduction of myself:
I am a 45 year old guy from the Netherlands. Since as long as I can remember I've been into all sorts of kinky stuff. Nowadays I like (self)bondage a lot, but my main fetish is all-over body wrapping. Any material or technique will do, but I prefer rubber, leather, clingfilm, tape and stuff like that. Anything that feels tight, is restrictive and somehow erotic, will do.
It goes both ways too. I like to be wrapped, as well as to wrap someone else.
My wife and I don't undertake such activities together anymore. But she will totally understand if I engage in kinky stuff with someone else. She might even want to watch π
Apart from all this, I am a generally nice guy. I enjoy (sci-fi) films, board games, driving a car, walking in the woods, stuff like that. If you ever visit my home town and see a tall, bald, slightly overweight fellow walking around in leather pants, that is probably me. Don't hesitate to ask if it is π
I want to show a trick how to fuse vinyl sheets airtight together. I dont read it already her, maybe not all know the technique.
Its very simple and 100% tight. But it has an big disadvantage ... it may be dangerous to health by breathing the toxic steam.
What you need:
- PVC sheets of the same (!) material
- an iron
- baking paper
The iron worked for me with the *** level as best.
You have to apply the baking paper between iron an the vinyl sheets. If you dont use the paper or something else, the sheets will only melt the iron left holes in it -> not airtight!
make a test run before you use your "good" material. i got the best results, when the vinyl was shining trough the baking paper.
I use a long slat under the vinyl sheet so i got a relative straight fused border.
if its cooled down, the vinyl is inseparable!
Caution!
The toxic gases are not good for your health!
If you do this, so on your own risk.
PVC produces a hazardous acid emission when you heat it over 100Β°C. Not to mention the freed softener.
So only do this in very well ventilated rooms or better outside!
Never breathe the emission directly!
Hi!
I want to share my experience with building airtight things.
I was very frustrated whenever i build a new perfect sealing bag/cocoon or something else and the only weakness was the untight air valve.
So i bought first a one-way-valve from the garden center from the hardware store. It was made of brass and only took me 10 EUR.
What i also bought were PVC pipes in the size of the one-way-valve. The gray cheap ones you use for bathroom installations. The big advantage of this pipes are, they already have a gasket in the inside.
So i took the valve an tried if its fit in the gasket side from one of the pipe an voila! It does!
You should try it before buying or you need another method to get it tight together.
I bought two 20cm pipe with both have end fittings. In the one pipe in the end fitting, the valve takes place and the other smaller side of this will be plugged in the end fitting of the second pipe.
Between this two pipes, the vinyl will be "squeezed" in.
So if you have your vinyl bag, cut one of the corner so that the pipe slightly fits in it. By plugging the 2 pipes together and squeezing the vinyl sheet between there will be an very airtight connection!
Pro:
- Cheap
- Reusable (no gluing or permanent fixation)
Contra:
- may not work for all materials (latex?) and not all material strengths
You could also Using this technique for building other airtight things, for example airtight breathing entrys.
For that i bought one pipe with gasket end fitting and a fitting dummy plug.
I made a hole in the dummy plug so that a breathing tube slightly fits in it. You need to apply a bit hot glue for making it tight, but at all its the same technique.
![[Image: 659136358123887.jpg]](http://thumbnails109.imagebam.com/35813/659136358123887.jpg)
![[Image: c69da6358123890.jpg]](http://thumbnails109.imagebam.com/35813/c69da6358123890.jpg)
![[Image: e597fe358123892.jpg]](http://thumbnails111.imagebam.com/35813/e597fe358123892.jpg)
![[Image: 0bed1c358123895.jpg]](http://thumbnails112.imagebam.com/35813/0bed1c358123895.jpg)
![[Image: b099f7358123897.jpg]](http://thumbnails109.imagebam.com/35813/b099f7358123897.jpg)
![[Image: ecf90e358123905.jpg]](http://thumbnails110.imagebam.com/35813/ecf90e358123905.jpg)
![[Image: a188fc358123909.jpg]](http://thumbnails111.imagebam.com/35813/a188fc358123909.jpg)
