Self-Bondage Session ideas, requests and fiction    24 Replies

OK,

“Disclaimer” the following is merely fantasy and a starting point to turn into a valid and or possible scenario. All values and details are not finalised and are open for disscussion, encouragement/discouragement. “End Disclaimer”

Brain has been in overdrive for a while. Was considering leaving it a surprise and then sharing it with you. But after my last session I enjoyed having input from you fine people that I feel like I need to share from concept to event.

Soooooo.....

Session is to go as planned. Dressed in my bodysuit again, corset, collar and open face mask. Inflatable plug in again, and wearing either ballet heels or high heels. Haven’t decided which yet. 

I will have a wand and sheath locked to me with a catheter in as I may be there a while. My balls will have a chain locked around them which will be locked to a strong mag lock on the floor. I will be able to move a few steps but not leave the area. The mag lock will be attached to a mechanical timer that will release me in 24 hours. That’s right. We’re going all in. 

My hands will be locked with a short chain to my waist. 

Suspended from above will be a box just large enough for my head with an hinged opening. Inside the box is a dildo and a button just above it. If I don’t want to wait 24 hours for release then I will have to put my head in the box and swallow the dildo. As I do, my nose will hit the button causing the box to close and lock, starting another timer that will release me in 5 hours. Five hours of being forced to stand in heels.

As always I appreciate input, and will need some serious ideas and help on logistics and electronics. Or simple mechanical mechanisms. This is a pipe dream at the moment, so any thoughts and improvements are welcome.

Site    3 Replies

In addition to user titles the following information is shown in the user field:

Avatar
Name
Online status (green/grey dot)
Title
Amount of posts
Thanks received
Thanks given
Joined

Do we need to add or remove anything? For example:


The online status can be removed (will save some SQL queries)
The stars according to the user title are already removed (saved dozens of HTML queries and elements per page, along with some SQL queries)
Sex/Gender (removed)
Location (removed)
Joined can also be removed, and replaced, with, say "Last active"

Please have a look at your and others profiles (all the info is there), what in your opinion might be useful and should be shown by each post?

If needed new custom fields can be added.

Plugs, vibrators, watersport and chastity toys    17 Replies

I saw a lot of posts on a lot of forums about controlling an "Hitachi" magic wand using a relay. For me, using mains power for anything SB related seems way too dangerous.

So I came across this hilarious, yet informative, video:

Introduce yourself    2 Replies

I'm jay and I came here to explore hypnosis and brainwashing. 

This is something I've been fascinated with since I was a kid and I've decided that I have to experience it. This is one of the only things I have to do before I cam leave this earth saying I've done everything I have ever dreamed of😊

My goal is fairly simple...to become a mindless slave in a waking trance, a slave in the truest sense.

I stumbled upon this forum while searching and I hope I can be an active member.

Lycra shopping    7 Replies

What is this material?

https://www.etsy.com/listing/734411447/b...mification

It looks soft and stretchy but secure.  A type of neoprene?

Attached Files

Thumbnail(s)
                               

Self-bondage General    8 Replies

Wanting to know if I can use my armbinders in selfbondage. Will post photos of the type I have later. Also ideas for duct tape encasement or mummification. love the feeling of being totally restricted but finding hard to do in self bondage.

Hypnosis and Hypno-fetish    20 Replies

I want to find more sissy mantras and sissy songs. Do you know any?
Sissy mantras repeat the same phrase over and over. Sissy songs are either mantras over music, or songs with erotic lyrics. These are some examples:

Self-Bondage Techniques    6 Replies

I found this video recently, where a girl uses a neck-to-hands metal cangue device and locks herself into it:

Latex    6 Replies

Hi all,

So, a sad news first.  I was getting ready to make some photo to show you my home-made MTM chlorinated neck entry latex catsuit I build some month ago.  Unfortunately, I tore it down from the neck to my waist so, no photo this time, sorry.    😡 

But, since there was some flaws in the design around the neck, I guess it should have append.  The neck , was pressing on the front and loose on the back, probably not in the right angle too.

A bit of history here.  I'm not a patron expert but I did not wanted to just make a simple design.  I wanted the suit to be skin tight, a little smaller for hugness and as little "air area" inside.  Meaning places where, due to tightness, the latex cannot follow the skin and float over it.  I have this below the arm and on the back of my back with usual internet design.  I also wanted the leg/body line to follow my butt.  (Well, this part did not worked as well as expected as the line is too low)  So I decided to take inspiration from different non-latex designs I saw on Pinterest (danse body, swimsuit, ...) as well as the small amount of latex design you can find on the internet.  As this project is quite challenging on the details, I designed it using a start base from mr Doo's  latex stocking design made using Valentina/Seamly2D (an open source patron designe software) ans I extended it for the whole body.

The files are linked here for you information but keep in mind I'm not an expert and did some manual adjustment.  A Valentina design is supposed to be perfectly matching the entered body measure, it will probably not work everywhere.

Now the future.  I don't have enough latex to build one from the ground but I want to take the opportunity to adjust my upper body design.  So, I plan to make a new front body, neck piece, adjust the back and keep the arms, back and legs.  As anybody an advice on how a skin-tight neck should be designed?  As I did not found information this part, this was probably the most improvised part of my design so, even I believe to know what should be changed, I'd like to have some other idea on it...  

For those who want to dig into Seamly/Valentina.  My files will only open in Valentina as the latest Seamly was slow on curve editing my computer and it seemed that it's not update anymore, in contrary to Valentina (a fork of seamly) whose repository is heavily updated, if not the downloadable binary themselves.

I believe the following should be changed/knowed on my design

1. It's a male design
   
2. the butt line is too low for my taste so, I will (later) change it
   
3. the back of the neck is too low.  I don't know if I mismeasured it or if its something else in my design
   
4. the neck is eased by 0.9, I think it should be at least 0.95 to be comfortable on long wear
   
5. There are 2 vertical line on the left part.  These where framed to check that the seamed line of the butt had the same length in the body and in the legs.  The 3 ones on the right have the same purpose for the arm/body seam.
   
6. There is a cut on the back body piece, it's there to shortened the line as I have a bigger front waist line than back waist line.  This was the cause of the "air" on my back.  Thanked to this, I have much less air, still a little as my back is curved.  I believe I'll have nothing better.
   
7. There is a zipper missing in the files for the butt/crotch.  I added it manually : 4way zipper to I can have a butt plug and my cock on the outside while not feeling the opened aire between the two which I hate.  You can start it from the high hip on the front but U believe it should go a little higher on the back as I can feel it when adding a plug.  It's a little too short.
   
8. For the feet, I wanted a separate sock for long term, below normal cloth wear.  So removed the feet from the printing and made a foot line a bit like fantastic rubber.  I also printed knee-high sock with the original mrdoo's design, it's just perfect  😊
   
9. When glueing, I made mistake : the front /back seam and the arm seams should be pointing in the same direction to avoid both seams to hooked themselves...
   

Attached Files

  Neck Entry Catsuit V2_1.pdf (Size: 28.54 KB / Downloads: 234)
  neck entry catsuit V2.zip (Size: 18.08 KB / Downloads: 151)

Marketplace    7 Replies

Segufix, Latex Masks and Sleepingbag, Estim
Here is some stuf i want so sell.
I live in Germany, so please no offers from over seas.
The prices are without shipping and if you take multiple items i can go down with the price.

8 Segufix Magnetlocks without key: 7,50€/each VB



Estim Mystim Tension Lover: 65€ VB
The Cables art Shortend. You may use them if you screw on new Connectors or just buy a pair of new cables for a fiew €


Serious Kit Estim Liners size L 15€/each VB
 37cm long and 6.5cm wide


Latex Mask Size M  0,5mm transparent without holes: 27€ VB


Latex Mask Size M Chlorinated von Fetisso 0,45mm black Latex long and Faceopen: 30€ VB


Latex Sleepingbag size L mit Backzipper and short Crotchzipper with D-Ringsl: 120€ VB
Black Latex 0,45mm.