Total latex encasement, latex mummification bondage

I would love to be bound in a latex suit like that.
But me thinks I be the only one in these parts of the hills.

Sometimes living in the forest has its drawbacks.

More latex fun:

Male first...
    - nothing more to add 😉
    - I spy a bulge 😇
    - I think he's enjoying it 😁
    - something I think I'd like to try

...and..

    - Ra, chlorinating his latex, possibly....??? 😋
    - OK, so not 100% encasement, but 100% sexy?

enjoy

MJ

[Like Ra]

- Ra, chlorinating his latex, possibly....??? 😋

What a compliment! 😋

Err... not a lot I can say about this...

    - interesting?

MJ

[video=youtube]

Source: https://youtu.be/rJ5plKwoRcA
[/video]

[video=youtube]

Source: https://youtu.be/rJ5plKwoRcA
[/video]

I've been wanting to have a go at something like this.
Was looking into a neck entry body bag a few months ago... but I'm now thinking I could probably make it myself.
I read (maybe on here) that a lubricated tube can be inserted down the neck of the bag and hooked with toes legs bent. Then suck with your mouth and out through the nose until suitable suction is achieved.
Straighten the legs and the tube is now sealed inside and you are vacpacked.

Release is achieved by moisture building up while thrashing around eventually giving you enough 'lube' to move your arms to get free.
As a failsafe I'm fairly sure that if you have a decent drink before jumping in you will need to go at some point providing more moisture.

Now I just need to convince the wife that I need some help with the measurements for my pervery!! 😉

[Like Ra]

A couple of years ago I bought a chlorinated latex sack with a neck entry. I thought that a tube or a valve is aeady attached to it, but no 😟 One bad thing about the neck-entry is that it's too tight against the neck. OTOH, it's air-tight.

Then suck with your mouth and out through the nose

Yes, I had a similar idea, but using a valve glued to the sack. I think that this solution:

I read (maybe on here) that a lubricated tube can be inserted down the neck of the bag

might not work, because you have to use either a thin tube to keep it more air-tight (but it's VERY difficult to suck the internal air out with your lungs through a narrow tube, I tried), or a big diameter tube to suck quickly, but it will not be hermetical. So, I would prefer a glued valve. Doe anybody know where to get one?

[Like Ra]

   

😉

There's a seller on Etsy. Their name is bright and shiny latex. They sell a body bag with a place to put a tube to suck the air out. The link is https://www.etsy.com/listing/287272031/l..._gallery_1

For the tube I'm using a 12mm diameter plastic tubing with a check valve from Amazon https://www.amazon.com/Farmunion-Return-...B01LXAP5CN

It works really well and you can remove the air with just putting the tube in your mouth

There's a seller on Etsy. Their name is bright and shiny latex. They sell a body bag with a place to put a tube to suck the air out. The link is https://www.etsy.com/listing/287272031/l..._gallery_1

For the tube I'm using a 12mm diameter plastic tubing with a check valve from Amazon https://www.amazon.com/Farmunion-Return-...B01LXAP5CN

It works really well and you can remove the air with just putting the tube in your mouth

That's great and a great price too.
Hard to tell exactly from the photos but I assume its neck entry?
Once you've sucked out the air how to you get free?

Wiggle and build up a sweat until you can move an arm up and break the seal at the neck??