Next session. Out of the box!

[Frank]

Have you seen this bit of artwork by Rook?
   

[Like Ra]

Have you seen this bit of artwork by Rook?

Nice! Just as described! But on the picture I don't see how it's related to release, or the reason why she should "use" the dildo (or is it a glory-hole? 😋 )

[essanym]

OTOH, being stuck in a "gagging box" is quite an experience!

Yeah, I actually think it's a really cool idea.

[The inspector]

I always aim more towards the full on experience. It may seem daunting but I like the thrill. Good artwork. Kind of what I’m aiming for.

[Max515]

Keep the dildo, but don't make it a no-return choice.
For example, keep the button pressed for 1 hour get released early. Put the button in the box above the dildo to press it with your nose. If there is any problem, remove yourself from the box and continue pressing later if you want. Releaseing the button early should not reset the timer, allowing you to continue from where you stopped.
You should have a phone nearby.

[The inspector]

Update: I have started making a cardboard mock up of the box to figure out dimensions. I want the box to be tight and restrictive to make it feel like a real forfeit. I like to make things difficult and thus feel like a real challenge/forfeit.

I made the box too large to begin with and then kept trimming down until I have a close measurement. Can then get to work cutting MDF to make the final box.

[ltxrob]

Update: I have started making a cardboard mock up of the box to figure out dimensions. I want the box to be tight and restrictive to make it feel like a real forfeit. I like to make things difficult and thus feel like a real challenge/forfeit.

I made the box too large to begin with and then kept trimming down until I have a close measurement. Can then get to work cutting MDF to make the final box.

sound fun... love a kinky project, keep us posted with photo updates!! 😁

[The inspector]

Has anyone ever tried measuring their own head? It’s surprisingly hard to do. Tried everything from tape measure to pushing my head into a piece of card and drawing round it. Now resorted to making some rough panels out of card for the box and then trimming them down bit by bit. I want the box to be as snug a fit as possible. Those of you that saw my last session will know that I like it to be both challenging and restrictive.

[ltxrob]

yes tricky!!

One of the best ways i've seen do it is to use the old fashion double screw carpentry clamps..
wind it in until its snugging up take it off and measure between the jaws!

Like these..

[The inspector]

yes tricky!!

One of the best ways i've seen do it is to use the old fashion double screw carpentry clamps..
wind it in until its snugging up take it off and measure between the jaws!

Like these..
. ..

Good shout! Don’t know why I didn’t think of that. Just sat with a pair of scissors chewing away to get some basic numbers. 😂