Built an Edging/Orgasm Denial Device, NoGasm

[no smile]

I think there is a whole diy kit doing the same.  It would cost much less if you can do it yourself...

EDIT ; found it : https://github.com/nogasm/nogasm

With the whole 3D print file, pcq gerber, program...

[essanym]

I think there is a whole diy kit doing the same. It would cost much less if you can do it yourself...

EDIT ; found it : https://github.com/nogasm/nogasm

With the whole 3D print file, pcq gerber, program...

I've actually had a nogasm 99% done for months. There is one part that, unfortunately, is also used in medical equipment like ventilators that is in short supply and has been for months. None of the suppliers know when they will be available again. I've done all the 3d printing, I had the circuit boards made in China (30 of them in white, btw) but I can't get the air pressure sensor I need so I can't even use the damn thing. If any of you are interested in building one of these when all the parts are available, I'd be happy to help out however I can; 3d printing or soldering perhaps?

[essanym]

Ok, I’ll be a fish for the masses and byte.

What is Edging and is it for guys or girls or both?

Edging is when you try to get off without actually getting off, so you take yourself to the edge of orgasm and stop.... over and over again.  This is what that program I wrote about in another thread does for me.  It's for male or female.

[Like Ra]

AFAIR we aeady have a thread on this.

Here it is: https://www.likera.com/forum/mybb/showth...p?tid=2737

[no smile]

I think there is a whole diy kit doing the same.  It would cost much less if you can do it yourself...

EDIT ; found it : https://github.com/nogasm/nogasm

With the whole 3D print file, pcq gerber, program...

I've actually had a nogasm 99% done for months.  There is one part that, unfortunately, is also used in medical equipment like ventilators that is in short supply and has been for months.  None of the suppliers know when they will be available again.  I've done all the 3d printing, I had the circuit boards made in China (30 of them in white, btw) but I can't get the air pressure sensor I need so I can't even use the damn thing.  If any of you are interested in building one of these when all the parts are available, I'd be happy to help out however I can; 3d printing or soldering perhaps?

I don’t know where you are but I would gladly lighten you of one board  😁

Maybe the 3D print also.  We’ll get back when it’s again available  🤔

[essanym]

I don’t know where you are but I would gladly lighten you of one board

Maybe the 3D print also. We’ll get back when it’s again available
  •

Awesome, I'm in Oregon.

[no smile]

I don’t know where you are but I would gladly lighten you of one board 

Maybe the 3D print also.  We’ll get back when it’s again available 
  •

Awesome, I'm in Oregon.

😕 Ow, well, since I’m in Belgium, I guess this won’t be cheaper...

[Tinker D]

I think there is a whole diy kit doing the same.  It would cost much less if you can do it yourself...

EDIT ; found it : https://github.com/nogasm/nogasm

With the whole 3D print file, pcq gerber, program...

I've actually had a nogasm 99% done for months.  There is one part that, unfortunately, is also used in medical equipment like ventilators that is in short supply and has been for months.  None of the suppliers know when they will be available again.  I've done all the 3d printing, I had the circuit boards made in China (30 of them in white, btw) but I can't get the air pressure sensor I need so I can't even use the damn thing.  If any of you are interested in building one of these when all the parts are available, I'd be happy to help out however I can; 3d printing or soldering perhaps?

I don’t know where you are but I would gladly lighten you of one board  😁

Maybe the 3D print also.  We’ll get back when it’s again available  🤔

What air pressure sensor do you need?
Make, model, basic type or serial communication??

I may be able to locate something from my line of work.

[essanym]

What air pressure sensor do you need?

NXP mp3v5050gp

I don't know how it communicates but you can look up the spec sheet. All I know is if I can't get that exact one, I wouldn't have a clue how to alter the code or the electronics to use a different one.

[Tinker D]

Came up with this.