All things kigurumi

[Like Ra]

each one is custom sized for a no wrinkle fit. Most zentai would be very prone to wrinkles and in that color it would be very obvious

Now that makes sense! Thanks!

But that also means, that all the measuring should be done with padding in place, right? And if you change the padding, do you need another suit?

[KageRa]

each one is custom sized for a no wrinkle fit. Most zentai would be very prone to wrinkles and in that color it would be very obvious

Now that makes sense! Thanks!

But that also means, that all the measuring should be done with padding in place, right? And if you change the padding, do you need another suit?

Good questions. Yes you measure with all your padding and shapewear and no you dont need to replace it if you change your pads a little. its sized need to stretch a little to fit right so going up or down in pad size isnt that big a deal as long as its only a little. Same with breastforms. if you make major changes to your pad or breastform size then yes you'd want to get a new one though.

[Like Ra]

If you order a new mask, do you need a new matching hadatai, or the colours are "coded" (by the same shop/manufacturer?) and both the suits and the masks can be made "separately"? Same for the suit (fabric ages and wears 😟) Can you go to another shop? Or it's "guaranteed' that the colours will not match?

[KageRa]

If you order a new mask, do you need a new matching hadatai, or the colours are "coded" (by the same shop/manufacturer?) and both the suits and the masks can be made "separately"? Same for the suit (fabric ages and wears 😟) Can you go to another shop? Or it's "guaranteed' that the colours will not match?

almost every mask is color matched to the hadatai produced by MWF. the few that arent are either 
A: made by ayame who has their own hadatai line and color
B: close enough to not be noticable
Most people with multiple masks from multiple makers can use the same hadatai for all of them. Ayame is the only mask maker to make their own hadatai.

[Like Ra]

Another question 😉

How do you see through the mask? Or.. you don't?

[KageRa]

Another question 😉

How do you see through the mask? Or.. you don't?

look REALLY closely at the eyes of the mask in the pictures and see if you can see it

[Like Ra]

look REALLY closely at the eyes of the mask in the pictures and see if you can see it

Errrmmm.... This?
   

[KageRa]

look REALLY closely at the eyes of the mask in the pictures and see if you can see it

Errrmmm.... This?
[attachment=31332]

Thats correct but also these
   

[Like Ra]

AH, I thought that pupils are not holes. Or they are not and it's just a semi-transparent plastic? They do not look like holes...

[KageRa]

Its a black tulle mesh for the right pupil and the upper sections of both eyes. slightly limited vision because of the mesh but definitely still good