Another thing you could do is to have a floting magnet in the glass and a box with a magnet in and when the magnet in the glass gets to the bottom it pushes the other magnet with the keys in side
the box would have to have a flap on one side and your hands woul have to be tied or you could break it open in a emergancy
you could also use like ra's scheem but it drips a magnet that goes
into the glass ( coverd in something nasty ie. Dog do etc))
Ok, my turn.
I like chair bondage myself. Because the ice release can not be used where I'm located, I use the water bucket release I came up with a year ago.
I have a 5 gallon bucket with a small hose connected to a weight to keep it at the bottom of the bucket. The other end of the hose connects to the gag I wear when bound.
I have a block of wood with an eyelet and washers to make it heavy, but still float.
A string/cord connects the wood block, then feeds through a pulley just above and behind the chair. The cord then connects to the keys on a small shelf far away from the chair.
When the wood block reaches the bottom if the bucket, the cord pulls the keys off the shelf and swing to the back of the chair.
Now, how much water do you need to put into the bucket?
I use about 1 gallon. That's good for about a half day of bondage.
If you want, get some large diamater pvc pipe and cap one end.
Fill it with water and use it instead of the bucket.
It does work very well, and you'll need your piss condom.
Happy bondage.
Imagine you have a latex hood with an inflatable built-in gag with a breathing tube (this is what I use). You can't spit it out inside of the hood 😉
I am about to do a self-bondage forced-piss-drinking scenario.
This is the equipment I have:
1. Wrist and ankle restraints (these can be fashioned out of basic cords or neck ties)
2. An ice lock
3. An external catheter (basically like a condom with a rubber tube opening at the top)
4. A few yards of silicone tubing (can be bought online, usually used for medical reasons or food processing etc)
5. Some sort of gag, or cloth tape
This is the stages of preparation:
1. An hour before I lock myself in, I will consume a lot of water.
2. I will securely tape the silicone tube to the opening of the condom catheter.
3. I will arrange the restraints with the ice lock. This will take about an hour to melt, meaning I am restrained and helpless for an hour.
4. I put the 'catheter' sheath over my penis.
5. I secure the other end of the silicone tubing in my mouth, either using a gag to hold it in place and/or lots of tape, so I can't spit out the tube OR anything that may flow through it.
6. I lock myself in the restraints.
7. Now I am restrained and 100% helpless for an hour - and I am DESPERATE to urinate. I therefore have two choices. Either I can hold it in, which would be agonising and hugely uncomfortable, OR I can get some relief by releasing my bladder, only to have the urine flow straight into my mouth, with no choice but to gulp it down...