Like Ra in latex catsuit, latex mask and high heels
Like Ra's Naughty Playground

"crossdress" fetish "latex"
Crossdressing Shoes 20cm Gothic Peep Toe Strip Pole Dance Heels Exotic Sexy Fetish Shoes 8Inch Catwalk Flock Elegant large size
$60.50-21%

"arm binder"
Arm Cover Binder Bracket Plate With Tape Guide For Durkopp Adler 69 Machine
$96.79-18%

"inlzdz"
Womens Rhinestone Ice Skating Dress Stage Ballroom Dance Performance Competition Outfit Gymnastics Latin Dance Leotard Dress
$34.36-40%

"silicone" "bodysuit"
Bodysuit Clothes for Silicone Baby Doll for Girl Boy 50-60cm Doll Toy Gifts For Children Bebe Reborn Toddler Outfit Clothing Set
$5.90-15%

latex rubber handmade sexy costume fetish lingerie
Handmade Sexy Natural Gummi Latex Underwear Lady Briefs Women Rubber Tooth Edge Shorts Fetish Woman Sexy Thong Lady's lIngeries
$26.62-10%

oil shiny bodycon
Sexy Satin Oil Glossy Shiny Pencil Foot Pants Elastic Tight Smooth Sheer See Through Leggings Dance Tights Candy Color Leotard
$255.58-14%

rope clip hanger ratchet
New Multicolors Windproof Pulley Ratchets 4mm 4meters High Quality Heavy Duty Rope Clip Hanger Outdoor Lanyard Hanger
$38.05-34%



To view Aliexpress you might need to switch your mobile browser to the Desktop version.


Spanking machine
Spanking machine
€159.95

If you would like to use search functions, view hidden archives or play games, please consider registering.


Electromagnet cuffs
#21
I’ll make something myself for this session! You never know for future ones though! I’ll keep you in mind!
Reply
#22
(23 Apr 2019, 19:19 )Like Ra Wrote: A similar relay, but 3 times cheaper and a bit smaller in size.

Yes. I saw those too. But they start timing on power on and can be turned off again by powering off eg a switch. 

The one I ordered has the option of one time start trigger irrelevant of time of power being connected
Reply
#23
(23 Apr 2019, 19:29 )Like Ra Wrote: My idea was to connect a battery directly to the magnet. Similar to icelocks - battery discharged - you are free. The approximate lock-time can be calculated.

That was my plan too. But I decided I wanted to be able to set it less than approx 1hr if I wanted too. 
This will still be the fail safe as 2 x 9v batteries in series will give me 18v giving a stronger hold and the electronics will run from it too. When they run out everything will fail safe. 
So even if I chose 15-30 mins.... I’d still be free in 1 hr if something broke.
Reply
#24
(23 Apr 2019, 21:49 )The inspector Wrote: I wish I had a 3D printer. Need to make some surrounds for my mag locks. 60kg rated.

If you have the file, you can send it to Shapeways (or a similar service) - they'll print out the parts and send it to you.
Reply
#25
That is useful to know! Thanks for that! Didn’t realise there were mail order 3D printers!
Reply
#26
(24 Apr 2019, 07:11 )ltxrob Wrote: 2 x 9v batteries in series will give me 18v giving a stronger hold
The magnets can overheat and painfully burn. Been there. I prefer to power a 12v magnet with no more, than 9v.
Reply
#27
(24 Apr 2019, 10:48 )Like Ra Wrote:
(24 Apr 2019, 07:11 )ltxrob Wrote: 2 x 9v batteries in series will give me 18v giving a stronger hold
The magnets can overheat and painfully burn. Been there. I prefer to power a 12v magnet with no more, than 9v.

Yes it was something I was going to check. 
If they do run hot I’ll put a 7812 or 7809 voltage regulator in and  run them like that. 
Board runs between 16  & 30v  so need to have 18v available.
Reply
#28
Yes 18v for 10 minutes made the magnets get quite hot.
7809 & 7812 regulators ordered.
Will test again on 12v to see if they get hot too.
Reply
#29
Ok tested further with 12v and 9v

Ran them both for 10-15 mins each

Neither got as hot as 18v but 12v was still a little warmer than 9v

Should not be an issue with my 3D prints going soft, I’d estimate temperature to have reached 45-50 deg C, while the 18v was probably close to 75 deg and hard to hold.
Reply
#30
I had 24V electromagnetic cuffs. Had to run them on 12V.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Wrist cuffs for fitness training are suitable for bondage too Anne 2 1,289 13 Jun 2024, 16:30
Last Post: Anne
DIY electromagnet based time-lock devices Like Ra 33 29,650 01 Apr 2024, 23:28
Last Post: Tinker D
Hidden electromagnet in ceiling as anchor point Bound Whore 9 1,606 16 Jul 2022, 23:24
Last Post: Like Ra
Analhook cuffs prototype. Vacbedbound 2 2,893 25 Oct 2019, 22:51
Last Post: Zooy
stiff cuffs lugnuts 20 7,958 04 Dec 2017, 06:31
Last Post: Tinker D