3d printed self bondage.

I also now have a far greater understanding of why people prefer bendable(hard material) or flexible materials for armbinders. Having both your arms forced at the shouldsto point at close to 90 degrees is extremely uncomfortable.

I tried to do sort of a strappado thing where I just lie on the ground with my arms lifted behind me to prevent the armbinder cuffs from falling off but that is a mistake. I could not move my arms properly as the strappado prevented me from reaching my cuffs. Luckily the cheap Chinese leather was not up to the task and broke on one of the handcuffs afterwards I just cut the rope. I wouldn't do what I just did without a lot of extra consideration for escape but if any of you are interested it is fairly easy. What I did was have a rope loop attached to a hardpoint and size it so that when the cuffs are attached it is at the same height as my hands behind my back when kneeling. I then frogtied myself in a kneeling position and put on the elbow binders before attaching the wrist cuffs then gently falling forwards. Very restrictive and very comfortable.

If you try this I would also place a pair of scissors on the same rope loop so you can cut the rope off if something goes wrong aa well as other safety measures. I will not be trying it anymore as the armbinder cuffs were uncomfortable in general

I have decided to try making it in a more reverse prayer fashion as boxties work poorly with solid frames. You don't realize that with rope but boxties rely on the two arms being slightly offset from one another which is difficult to do on a solid frame.

I have decided to try making it in a more reverse prayer fashion as boxties work poorly with solid frames. You don't realize that with rope but boxties rely on the two arms being slightly offset from one another which is difficult to do on a solid frame.

I was wondering about that because you said it takes 2 days to print a single cuff.  That seems kind of slow to me but I don't know your settings.  If you decide to release the 3d model files, I'd love to have a go at printing it myself.

Broke my leather handcuffs so I printed a pair of hinged ones. Very restrictive, comfy and cost me 1 dollar. Found on thingiverse. First pair I actually consider sleeping in.

Finally found a durable and reliable closing mechanism. Rubber band closing on a gate latch. Self closes with a hole punched on top to allow for string to open.

Had a few spare hours on the printer so I printed an older design I found to ensure that my pesky right hand wouldn't be able to interfere in my self bondage experience when I get back to it someday. I present my own pair of 3d printed fist covers. Should be able to nullify my right hand so that my less flexible left hand can lock my right then itself in. Also I feel like it deserves mentioning that my right hand when not balled up can push through practically any self bondage rope cuff and can extend surprisingly far.

Broke my leather handcuffs so I printed a pair of hinged ones. Very restrictive, comfy and cost me 1 dollar. Found on thingiverse. First pair I actually consider sleeping in.

Do you a link or the stl?

I have a few normal steel ones but I'm curious how good printed ones are.

Broke my leather handcuffs so I printed a pair of hinged ones. Very restrictive, comfy and cost me 1 dollar. Found on thingiverse. First pair I actually consider sleeping in.

Do you a link or the stl?

I have a few normal steel ones but I'm curious how good printed ones are.

https://www.thingiverse.com/thing:3215043
Here ya go.

Wow hope I'd seen this earlier, super fascinating! Is it expensive or hard to setup? Impressive! I wish I had friends like you 😂 3d printing has been around for ages and it still so damn amazing. U did all on your own?

It's so much better living alone, my selfbondage opportunity increased so much... Privacy + own spending money... Upgraded from some shoelaces and old belts straight to having actual rope and gags...

I hope to lesrn to make own gear one day too =) I like the idea of some plastic parts can combine with other materials such as ropes, straps etc and offer limitless configurations

Reminds me of selfbondage webbing system but better...

Having purpose made and modular stuff is damn cool, gonna be a step up from all the makeshift

I looked into 3D printing a few years ago. Yea!!! Looked great. Wanted one....
But, for me, it turned out what I wanted just was not to be.
I couldn’t even find anyone close by that could show me anything about 3D printing. So I just contracted out the parts I needed.

Then I found out that I could make my own parts by using an old child’s toy from the 60s.

But your mitts looks fantastic. It also gave me an idea.
Just need to word it correctly.