Login

***Like Ra*** · 27 Mar 2021, 18:19

Added .step and .stp with the maximum size of 10MB. Let me know if the max size should be increased.

essanym · 27 Mar 2021, 18:22

(27 Mar 2021, 18:14 )Like Ra Wrote: Yep, doing that at the moment... How big are they usually?

The ones I have are just under 500k each but they are the first ones I've ever made so not really sure how large they are normally.

Lancer · 27 Mar 2021, 18:43

(27 Mar 2021, 18:19 )Like Ra Wrote: Added .step and .stp with the maximum size of 10MB. Let me know if the max size should be increased.

I have many stls over 60 MB

***Like Ra*** · 27 Mar 2021, 18:51

(27 Mar 2021, 18:43 )Lancer Wrote: I have many stls over 60 MB

Whoa... OK, let me know if you are going to upload such files here. What is their usual extention? .st? .stp?

Lancer · 27 Mar 2021, 19:29

(27 Mar 2021, 18:51 )Like Ra Wrote:
(27 Mar 2021, 18:43 )Lancer Wrote: I have many stls over 60 MB
Whoa... OK, let me know if you are going to upload such files here. What is their usual extention? .st? .stp?

Actually I have decided to just upload to thingiverse and just add the link here. Less stressful on the servers. Might cause link rot later down the line though.

Lancer · 27 Mar 2021, 19:52

The wait is quite unbearable. Takes so long to print out. At least it is printing fien

essanym · 27 Mar 2021, 20:14

Here's what I've made. I haven't worked on these in ages and probably wouldn't print them as is. The bondage helmet, for instance, is still missing a hinge. Anyway, do whatever you like with them. If you happen to print them, I would love to see pictures of them... being used preferably 😊

Lancer · (This post was last modified: 29 Mar 2021, 02:04 by Lancer.)

(27 Mar 2021, 20:14 )essanym Wrote: Here's what I've made. I haven't worked on these in ages and probably wouldn't print them as is. The bondage helmet, for instance, is still missing a hinge. Anyway, do whatever you like with them. If you happen to print them, I would love to see pictures of them... being used preferably 😊

Success! I have my automatically latching handcuff lock design with a rotating cuff! It self closes when pushed against and can only be unlocked by pressing down on the latch in the middle. With a new modular lock design I can also swap out locks for fast prototyping.

***Like Ra*** · 29 Mar 2021, 02:21

Very clean print! Did you finish it with sandpaper or did it come out like this?

Lancer · 29 Mar 2021, 02:31

(29 Mar 2021, 02:21 )Like Ra Wrote: Very clean print! Did you finish it with sandpaper or did it come out like this?

Tis what it looks like. I did remove some supports but nothing major. Will be printing more stuff.b

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread	Author	Replies	Views	Last Post
3D-printed icelocks?	Bound Whore	1	1,333	01 Aug 2021, 00:11 Last Post: Lancer
3D Printed Ice Lock	mrgoat	17	12,081	06 Dec 2014, 03:40 Last Post: Like Ra