Like Ra's Naughty Forum
DIY chain harness - Printable Version

+- Like Ra's Naughty Forum (https://www.likera.com/forum/mybb)
+-- Forum: Bondage (https://www.likera.com/forum/mybb/Forum-Bondage)
+--- Forum: Bondage General (https://www.likera.com/forum/mybb/Forum-Bondage-General)
+--- Thread: DIY chain harness (/Thread-DIY-chain-harness)

Pages: 1 2

DIY chain harness - gagglover - 14 Dec 2011

I would like to build a chain harness

any suggestion?

thanks


gagglover



RE: DIY chain harness - Shibmo - 14 Dec 2011

(14 Dec 2011, 23:40 )gagglover Wrote: I would like to build a chain harness

any suggestion?

thanks


gagglover

But some chains, some Shackles, a couple of padlocks, some locktite, and off you go.

To make a good design, you will just have to try what you want.

Cheers,

Shibmo

RE: DIY chain harness - Like Ra - 15 Dec 2011

(14 Dec 2011, 23:40 )gagglover Wrote: I would like to build a chain harness

any suggestion?

You can use a rope technique, e.g. karada - http://www.likera.com/sb/tech.php

RE: DIY chain harness - Culmor - 15 Dec 2011

Gagglover wrote
Quote:any suggestion?

You could start with something like this 😉

basics.jpg thumbnail   

(...and yes, the weight attaches to what you think it does... 😒 )





RE: DIY chain harness - gagglover - 15 Dec 2011

i would like to emulate the ones with large metal rings and made of leather, i have chains and small schackles at the moment, do i need anything else?

RE: DIY chain harness - Culmor - 15 Dec 2011

(15 Dec 2011, 09:02 )gagglover Wrote: i would like to emulate the ones with large metal rings and made of leather, i have chains and small schackles at the moment, do i need anything else?

Large metal rings and leather?
😁


RE: DIY chain harness - Shibmo - 15 Dec 2011

don't forget to put some locktite on the thread of the shackles before you close them. It will make it impossible to loosen them without a pair of pliers, but with a pair of pliers it is still quite easy to open them.

Makes it safe and adaptable, but still very strickt as long as your toolbox is out of reach.

RE: DIY chain harness - gagglover - 15 Dec 2011

(15 Dec 2011, 20:22 )Shibmo Wrote: don't forget to put some locktite on the thread of the shackles before you close them. It will make it impossible to loosen them without a pair of pliers, but with a pair of pliers it is still quite easy to open them.

Makes it safe and adaptable, but still very strickt as long as your toolbox is out of reach.

today i bought those items:

5 meters steel chain
4 steel rings
10 shackles

Any suggestion how to make the connections?

ty all



RE: DIY chain harness - Like Ra - 15 Dec 2011

(15 Dec 2011, 20:53 )gagglover Wrote: Any suggestion how to make the connections?

In the top left corner:

(15 Dec 2011, 06:59 )culmor Wrote: [Image: attachment.php?thumbnail=4702]   

Or using padlocks. See http://www.likera.com/sb/tech.php ("Chains and locks")

RE: DIY chain harness - gagglover - 15 Dec 2011

(15 Dec 2011, 22:19 )Like Ra Wrote:
(15 Dec 2011, 20:53 )gagglover Wrote: Any suggestion how to make the connections?

In the top left corner:

(15 Dec 2011, 06:59 )culmor Wrote: [Image: attachment.php?thumbnail=4702]   

Or using padlocks. See http://www.likera.com/sb/tech.php ("Chains and locks")

i got them all, i would like to know if someone has a scheme on how to connect segment of chains to create a nice harness 😊