+- Like Ra's Naughty Forum (https://www.likera.com/forum/mybb)
+-- Forum: Self-Bondage (https://www.likera.com/forum/mybb/Forum-Self-Bondage)
+--- Forum: Self-Bondage Techniques (https://www.likera.com/forum/mybb/Forum-Self-Bondage-Techniques)
+--- Thread: 3d printed self bondage. (/Thread-3d-printed-self-bondage)
RE: 3d printed self bondage. - Like Ra - 27 Mar 2021
Added .step and .stp with the maximum size of 10MB. Let me know if the max size should be increased.
RE: 3d printed self bondage. - essanym - 27 Mar 2021
(27 Mar 2021, 18:14 )Like Ra Wrote: Yep, doing that at the moment... How big are they usually?
The ones I have are just under 500k each but they are the first ones I've ever made so not really sure how large they are normally.
RE: 3d printed self bondage. - Lancer - 27 Mar 2021
(27 Mar 2021, 18:19 )Like Ra Wrote: Added .step and .stp with the maximum size of 10MB. Let me know if the max size should be increased.
I have many stls over 60 MB
RE: 3d printed self bondage. - Like Ra - 27 Mar 2021
(27 Mar 2021, 18:43 )Lancer Wrote: I have many stls over 60 MBWhoa... OK, let me know if you are going to upload such files here. What is their usual extention? .st? .stp?
RE: 3d printed self bondage. - Lancer - 27 Mar 2021
(27 Mar 2021, 18:51 )Like Ra Wrote:(27 Mar 2021, 18:43 )Lancer Wrote: I have many stls over 60 MBWhoa... OK, let me know if you are going to upload such files here. What is their usual extention? .st? .stp?
Actually I have decided to just upload to thingiverse and just add the link here. Less stressful on the servers. Might cause link rot later down the line though.
RE: 3d printed self bondage. - Lancer - 27 Mar 2021
The wait is quite unbearable. Takes so long to print out. At least it is printing fien
RE: 3d printed self bondage. - essanym - 27 Mar 2021
Here's what I've made. I haven't worked on these in ages and probably wouldn't print them as is. The bondage helmet, for instance, is still missing a hinge. Anyway, do whatever you like with them. If you happen to print them, I would love to see pictures of them... being used preferably 😊
RE: 3d printed self bondage. - Lancer - 29 Mar 2021
(27 Mar 2021, 20:14 )essanym Wrote: Here's what I've made. I haven't worked on these in ages and probably wouldn't print them as is. The bondage helmet, for instance, is still missing a hinge. Anyway, do whatever you like with them. If you happen to print them, I would love to see pictures of them... being used preferably 😊
Success! I have my automatically latching handcuff lock design with a rotating cuff! It self closes when pushed against and can only be unlocked by pressing down on the latch in the middle. With a new modular lock design I can also swap out locks for fast prototyping.
RE: 3d printed self bondage. - Like Ra - 29 Mar 2021
Very clean print! Did you finish it with sandpaper or did it come out like this?
RE: 3d printed self bondage. - Lancer - 29 Mar 2021
(29 Mar 2021, 02:21 )Like Ra Wrote: Very clean print! Did you finish it with sandpaper or did it come out like this?
Tis what it looks like. I did remove some supports but nothing major. Will be printing more stuff.b