I have a nice tip for a cheap airtight entry ... just get a cabel canal in the wanted length from the hardware store, it has a "U"-shape, perfectly to click a round ooden rod in it. Don't get a too tight rod/canal combination considering the material thickness of the sheet
In profile it should look like this
It has the following advantages:
- very cheap
- easy to make
- easy to use
- pretty airtight
- could be useful for more safety while self experiments
I used this mechanism several times at the end of my pvc-mattress-vacbed and it works perfect. If you lift your feet, the sheet will pull the rod out of the cable canal and it will open easily, without destroying.
I was experimenting with many sealing methods like using tape or applying a ziploc (from vacuum bags). Nothing worked better than the rod/canal combination.
With a little practice its also easy to apply this to the outside of the pvc bed from inside.
In profile it should look like this
It has the following advantages:
- very cheap
- easy to make
- easy to use
- pretty airtight
- could be useful for more safety while self experiments
I used this mechanism several times at the end of my pvc-mattress-vacbed and it works perfect. If you lift your feet, the sheet will pull the rod out of the cable canal and it will open easily, without destroying.
I was experimenting with many sealing methods like using tape or applying a ziploc (from vacuum bags). Nothing worked better than the rod/canal combination.
With a little practice its also easy to apply this to the outside of the pvc bed from inside.