Recently in my quest to force enemas upon myself while in self bondage I have come upon a couple different methods that I keep coming back to.
The first involves forcing myself to take a large volume enema before the key gets released. The setup involves hanging a full enema bag (4qt) from one side of a heavy duty clothes hanger, and a short dowel rod tied to the other side. At this point the enema bag weighs more than the other side so it hangs lower. The idea is to counter weight the hanger so when the enema bag empties, the hanger pivots and the key slides off the dowel. Equipment includes a homemade spreader bar made from 1" dowel and some screw hooks, a strict leather wrist to neck locking harness, and cuffs on my ankles.
I begin by filling and hanging the enema bag from a cloths hook on my bathroom door and inserting an inflatable enema plug. The key ring is hung on the opposite side from the bag on the small dowel. At this point the bag is lower. Next my ankles are locked to the spreader on the widest loops and a rope is run from the middle of the spreader to the loop on the neck of the strict leather harness. The length of the top is important as it prevents any possibility of getting up. Next I lock each wrist into the harness. My gag and locking hood are also on at this point. Lastly, I lock the neck portion of the harness. At this point, there is no escape until the enema bag is light enough to pivot and drop the keys. It either has to drain into me or I must push out the plug and make a mess on the floor.
The second method involves a winter fetish darlex sleep sack. I have takes a length of para cord and tied it to the top zipper, passed it through a 2 inch stainless steel ring and then tied the end to a second 2 inch ring. Other items are a locking hood, gallon enema bag and inflatable nozzle.
I begin by filling the bag and passing the nozzle through the "hole" the three zippers create. The nozzle in then inserted and inflated. I hang the bag over my bed and step into the bag pulling it up to my waist. In the cord tied to the zipper, I have tied a loop large enough to pass over the bathroom door knob.
The locking hood is put on and locked, keys on night table, my frozen 3d printed ice lock is locked from the ring on the front of hood, to the middle "free" ring on the zipper. This will be the release. I then take the loop I tied and pass it over the door knob. This is how I zip the sleep sack up. At this point, Id suggest you tuck lest you get stuck in the zipper. Recapping, hood on, middle ring locked via ice lock to neck, sack zipped. I hop to bed, and lay down. From here, it is very difficult to get free until the ice lock opens. Any effort made to pull the string to unzip is countered by the locked stainless ring. I begin the enema by feeling through the bag for the clamp.
An upgrade I've made to this is to replace the hose clamp with a electronic ball valve to control the flow of the enema. I have a script written to start and stop the flow on a random basis and duration.
The first involves forcing myself to take a large volume enema before the key gets released. The setup involves hanging a full enema bag (4qt) from one side of a heavy duty clothes hanger, and a short dowel rod tied to the other side. At this point the enema bag weighs more than the other side so it hangs lower. The idea is to counter weight the hanger so when the enema bag empties, the hanger pivots and the key slides off the dowel. Equipment includes a homemade spreader bar made from 1" dowel and some screw hooks, a strict leather wrist to neck locking harness, and cuffs on my ankles.
I begin by filling and hanging the enema bag from a cloths hook on my bathroom door and inserting an inflatable enema plug. The key ring is hung on the opposite side from the bag on the small dowel. At this point the bag is lower. Next my ankles are locked to the spreader on the widest loops and a rope is run from the middle of the spreader to the loop on the neck of the strict leather harness. The length of the top is important as it prevents any possibility of getting up. Next I lock each wrist into the harness. My gag and locking hood are also on at this point. Lastly, I lock the neck portion of the harness. At this point, there is no escape until the enema bag is light enough to pivot and drop the keys. It either has to drain into me or I must push out the plug and make a mess on the floor.
The second method involves a winter fetish darlex sleep sack. I have takes a length of para cord and tied it to the top zipper, passed it through a 2 inch stainless steel ring and then tied the end to a second 2 inch ring. Other items are a locking hood, gallon enema bag and inflatable nozzle.
I begin by filling the bag and passing the nozzle through the "hole" the three zippers create. The nozzle in then inserted and inflated. I hang the bag over my bed and step into the bag pulling it up to my waist. In the cord tied to the zipper, I have tied a loop large enough to pass over the bathroom door knob.
The locking hood is put on and locked, keys on night table, my frozen 3d printed ice lock is locked from the ring on the front of hood, to the middle "free" ring on the zipper. This will be the release. I then take the loop I tied and pass it over the door knob. This is how I zip the sleep sack up. At this point, Id suggest you tuck lest you get stuck in the zipper. Recapping, hood on, middle ring locked via ice lock to neck, sack zipped. I hop to bed, and lay down. From here, it is very difficult to get free until the ice lock opens. Any effort made to pull the string to unzip is countered by the locked stainless ring. I begin the enema by feeling through the bag for the clamp.
An upgrade I've made to this is to replace the hose clamp with a electronic ball valve to control the flow of the enema. I have a script written to start and stop the flow on a random basis and duration.
