The pain.exe and exit.exe files (Fitness Unpersonal Trainer)

[qwertybcn121]

Here I will post the pain.exe and the exit.exe files needed to run the "Fitness Unpersonal Trainer".

If you don't know what I'm talking about please take a look at:
http://www.likera.com/forum/mybb/showthread.php?tid=521

I have divided the files in categories depending on the teasing methods used (CD tray, servomotor, activated by sound devices, etc...)

I'll release new files I'll do updating this first post. Hope that the people who know how to compile litle programs can contribute to the post.



*****     CD 1 Tray Opening Teasing
It opens the first CD unit's tray and can push a switch. After 5, 10 or 20 seconds it closes the CD Tray.
Not suitable on laptops (they can not close the CD Tray)!!!



http://www.mediafire.com/?fm3n1nflmymdlmn





*****     CD 2 Tray Opening Teasing
Same as above but it opens the second CD unit's tray and push a switch. After 5, 10 or 20 seconds it closes the CD Tray.
Not suitable on laptops (they can not close the CD Tray)!!!

http://www.mediafire.com/?i9qa3i966n32uvi





*****     CD Tray Opening Release Method
Same as using the Selfbondage CD Tray Opener. It opens the first CD unit's tray releasing the key. Can be used with laptops.



http://www.mediafire.com/?g3gpax8tb4kauqr





*****     CD Tray 2 Opening Release Method
Same as using the Selfbondage CD Tray Opener. It opens the second CD unit's tray releasing the key. Can be used with laptops.

http://www.mediafire.com/?8mis01m2qoy3xtm




*****     Activated by sound teasing devices
The program will play a sound that will activate devices as antibarking dog collars. Sound can last 5, 10 or 20 seconds.



http://www.mediafire.com/?b59nkzn240flx26




*****     Activated by sound teasing devices with sound at 50Hz
Same as above but the sound is at 50Hz for those with homemade teasing devices requering this kind of sound

http://www.mediafire.com/?iy1r5bkrxx9cyyn




*****     Arduino board with one servomotor as teasing
My favourite one. One arduino connected by USb cable to computer and one servomotor.

To use it you'll find a .dll and a .pde file inside the zip. Upload the pde to the arduino and put the .dll in the same folder as pain.exe.
It works with an Arduino board on Com port 4 and a servo ruled at the pin analog 9.
Can rewrite the program for other Com ports or other pins.
The servo will be at 90 degree during the session and will move to position 0 degree to push any switch and after 5, 10 or 20 seconds will move back to 90 degree position.


http://www.mediafire.com/?0v6kumy0tc87v58




*****     Arduino board with one servomotor as release method
Same as above. Com port 4 and pin 9 servomotor. The servo will be at 90 degree during the session and will move to position 0 degree for releasing the key.



http://www.mediafire.com/?uz52avq4r4q1d0a




*****     Combined CD Tray Opening and Sound Teasing
Both at the same time. A sound to activate teasing devices ruled by sound and the CD opening and after 5, 10 or 20 seconds closing.

http://www.mediafire.com/?3983pyj6a1dmsvp


And that's all for today 😊


CD Tray 1 & Sound.zip (Size: 1.98 MB )
Servomotor Exit.zip (Size: 550.43 KB )
Servomotor.zip (Size: 1.67 MB )
Sound 50Hz.zip (Size: 5.93 MB )
Sound.zip (Size: 1.84 MB )
CD Tray 2 release method.zip (Size: 368.34 KB )
CD Tray Release method.zip (Size: 419.31 KB )
CD 2.zip (Size: 1.11 MB )
CD 1.zip (Size: 1.12 MB )