Like Ra's Naughty Forum
1st Test of Timer cuffs - Printable Version

+- Like Ra's Naughty Forum (https://www.likera.com/forum/mybb)
+-- Forum: Self-Bondage (https://www.likera.com/forum/mybb/Forum-Self-Bondage)
+--- Forum: Completed Self-Bondage Sessions (https://www.likera.com/forum/mybb/Forum-Completed-Self-Bondage-Sessions)
+---- Forum: Ltxrob's Self-Bondage Adventures (https://www.likera.com/forum/mybb/Forum-Ltxrob-s-Self-Bondage-Adventures)
+---- Thread: 1st Test of Timer cuffs (/Thread-1st-Test-of-Timer-cuffs)

Pages: 1 2


1st Test of Timer cuffs - ltxrob - 28 Oct 2019

As you may have seen in my other thread... it was on due to some unexpected time alone..


Source: https://www.pornhub.com/view_video.php?viewkey=ph5db6e28c5d678


It didnt all go to plane... timer cuffs didnt work... think I have an issue on the power board.. loose wire type thing

Times Vibe worked
Timed key box worked

so still had some fun... just not as fully restrained as planned..

Things started going to sleep, like ankles,, so all in all might have been a good thing

See above for naff video of the event 😋


RE: 1st Test of Timer cuffs - Like Ra - 28 Oct 2019

Nice outfit!


RE: 1st Test of Timer cuffs - ltxrob - 29 Oct 2019

(28 Oct 2019, 20:55 )Like Ra Wrote: Nice outfit!
thanks...

Top... All-Colours-Dance-Gymnastics-High-Neck-Lycra-Long-Sleeve-Leotard

 swimsuit-s-l500.jpg thumbnail   


Tights..Gatta-Tights-Brillant-Sexy-Glossy-Shiny-120-Denier-Opaque-Black

 tights-s-l1600.jpg thumbnail   

Corset.... cant recall... but its my wifes 😉


RE: 1st Test of Timer cuffs - Like Ra - 29 Oct 2019

I've looked at those Gatta ones a couple of years ago (I prefer back-seamed ones). How are they?


RE: 1st Test of Timer cuffs - ltxrob - 29 Oct 2019

(29 Oct 2019, 14:10 )Like Ra Wrote: I've looked at those Gatta ones a couple of years ago (I prefer back-seamed ones). How are they?
they are quite "lycra-ish" rather than pantihose/tights but are very lightweight feeling


RE: 1st Test of Timer cuffs - Max515 - 30 Oct 2019

I bought Gatta twice. They are too short and too wide. At the ankles they are much too wide! I bought XL and I'm 178cm/75kg.
The first pair I bought broke at the seams.
The second pair is somewhat different. They used something else to coat them on the exterior. When not streched, the exterior surface seems rough, like cracked paint. When stretched is just the normal soft feeling of spandex.
They aren't bad compared to others. The shine is great. The feeling is above average too, but I would prefer something more slippery. And taller! And tighter!

I will buy leohex next time. The shape of the foot and ankle seems a lot better. I'm curious how they compare.


RE: 1st Test of Timer cuffs - Like Ra - 30 Oct 2019

(30 Oct 2019, 20:56 )Max515 Wrote: I will buy leohex next time.
I definitely recommend Leohex! https://www.likera.com/forum/mybb/Thread-RE-Leohex-review


RE: 1st Test of Timer cuffs - madjack - 30 Oct 2019

(30 Oct 2019, 20:56 )Max515 Wrote: I bought Gatta twice. They are too short and too wide. At the ankles they are much too wide! I bought XL and I'm 178cm/75kg.
The first pair I bought broke at the seams.
The second pair is somewhat different. They used something else to coat them on the exterior. When not streched, the exterior surface seems rough, like cracked paint. When stretched is just the normal soft feeling of spandex.
They aren't bad compared to others. The shine is great. The feeling is above average too, but I would prefer something more slippery. And taller! And tighter!

I will buy leohex next time. The shape of the foot and ankle seems a lot better. I'm curious how they compare.
 

Interesting I brought Gatta, and I'm sure they're the same style as @ltxrob has - the fit is fine for me (185cm and 80kg)

Mine appear to be Lyrca/spandex rather than nylon or a nylon/Lycra mix, with sewn seams - initially I was disappointed about that, but I've grown to like them. No signs of wear and tear either... yet.

MJ


RE: 1st Test of Timer cuffs - madjack - 30 Oct 2019

(28 Oct 2019, 18:36 )ltxrob Wrote: Times Vibe worked


Always a good thing!  😁
 
But here's a thing - not only do you have the same tights that I do, but you also seem to be using the same vibrator/massager that I do (or at least something very similar - it even sounds like mine!). That beast is frighteningly powerful when set up correctly (or not, depending on what your looking for in your session)

I'm interested to know how you've managed to overcome some of the problems I have with mine.


1. Securing it in place! 
- The double headed, tapered, shape makes it positively impossible to tie in place. I've tried all sorts or rope/strap/belt and tape combinations, but nothing seems to work reliably. Any tips or suggestions?

2. The bloody annoying switch 
- if yours is like mine then there is a pathetic 3 position sliding switch on the reverse of the 'heads'. It can be 'Off', 'On - mild' and 'On-blow your balls off'! 

It's much to easy to move that useless switch into the wrong position, usually 'Off' in my case (ultra frustrating when you can hear the timer click on/off but fuck all happens in the desired area!). I've tried tape to hold the sliding switch in place, but either it's possessed by some mischievous Dom spirit who likes to see me suffer, or the plastic finish is too slippery  because even then the switch moves under the tape when I'm trying to fix it into position or writhing around in my bondage (as per 1 above - the damned thing usually moves anyway!)

When I can get it right the result is mind blowing (and blowing something else as well... ahem!  Blush ) but when it goes wrong I could cry in frustration (well, if I wasn't gagged and desperately trying to get myself off!)

I would love to know if you've cracked a method I can use too.

MJ

Ps. If you've not aeady experimented with it I would recommend NOT using the 'warming' head option on your cock or balls. A bit too intense in my experience - much nicer used for the purposes it was sold, soothing sore and aching muscles.  😁


RE: 1st Test of Timer cuffs - Max515 - 30 Oct 2019

Cut the switch short and use a screwdriver to move it.