Like Ra's Naughty Forum
Built an Edging/Orgasm Denial Device, NoGasm - Printable Version

+- Like Ra's Naughty Forum (https://www.likera.com/forum/mybb)
+-- Forum: Self-Bondage (https://www.likera.com/forum/mybb/Forum-Self-Bondage)
+--- Forum: Self-Bondage Techniques (https://www.likera.com/forum/mybb/Forum-Self-Bondage-Techniques)
+--- Thread: Built an Edging/Orgasm Denial Device, NoGasm (/Thread-Built-an-Edging-Orgasm-Denial-Device-NoGasm)

Pages: 1 2 3 4 5 6

RE: Edging - no smile - 03 Apr 2021

I think there is a whole diy kit doing the same.  It would cost much less if you can do it yourself...

EDIT ; found it : https://github.com/nogasm/nogasm

With the whole 3D print file, pcq gerber, program...

RE: Edging - essanym - 04 Apr 2021

(03 Apr 2021, 20:08 )no smile Wrote: I think there is a whole diy kit doing the same. It would cost much less if you can do it yourself...

EDIT ; found it : https://github.com/nogasm/nogasm

With the whole 3D print file, pcq gerber, program...

I've actually had a nogasm 99% done for months. There is one part that, unfortunately, is also used in medical equipment like ventilators that is in short supply and has been for months. None of the suppliers know when they will be available again. I've done all the 3d printing, I had the circuit boards made in China (30 of them in white, btw) but I can't get the air pressure sensor I need so I can't even use the damn thing. If any of you are interested in building one of these when all the parts are available, I'd be happy to help out however I can; 3d printing or soldering perhaps?

RE: Edging - essanym - 04 Apr 2021

(03 Apr 2021, 16:08 )Tinker D Wrote: Ok, I’ll be a fish for the masses and byte.

What is Edging and is it for guys or girls or both?

Edging is when you try to get off without actually getting off, so you take yourself to the edge of orgasm and stop.... over and over again.  This is what that program I wrote about in another thread does for me.  It's for male or female.

RE: Edging - Like Ra - 04 Apr 2021

AFAIR we aeady have a thread on this.

Here it is: https://www.likera.com/forum/mybb/showthread.php?tid=2737

RE: Edging - no smile - 04 Apr 2021

(04 Apr 2021, 06:03 )essanym Wrote:
(03 Apr 2021, 20:08 )no smile Wrote: I think there is a whole diy kit doing the same.  It would cost much less if you can do it yourself...

EDIT ; found it : https://github.com/nogasm/nogasm

With the whole 3D print file, pcq gerber, program...

I've actually had a nogasm 99% done for months.  There is one part that, unfortunately, is also used in medical equipment like ventilators that is in short supply and has been for months.  None of the suppliers know when they will be available again.  I've done all the 3d printing, I had the circuit boards made in China (30 of them in white, btw) but I can't get the air pressure sensor I need so I can't even use the damn thing.  If any of you are interested in building one of these when all the parts are available, I'd be happy to help out however I can; 3d printing or soldering perhaps?

I don’t know where you are but I would gladly lighten you of one board  😁

Maybe the 3D print also.  We’ll get back when it’s again available  🤔

RE: Edging - essanym - 04 Apr 2021

(04 Apr 2021, 09:35 )no smile Wrote: I don’t know where you are but I would gladly lighten you of one board [Image: biggrin.gif]

Maybe the 3D print also. We’ll get back when it’s again available [Image: huh.gif]
  •

Awesome, I'm in Oregon.

RE: Edging - no smile - 05 Apr 2021

(04 Apr 2021, 21:15 )essanym Wrote:
(04 Apr 2021, 09:35 )no smile Wrote: I don’t know where you are but I would gladly lighten you of one board  [Image: biggrin.gif]

Maybe the 3D print also.  We’ll get back when it’s again available  [Image: huh.gif]
  •

Awesome, I'm in Oregon.

😕 Ow, well, since I’m in Belgium, I guess this won’t be cheaper...

RE: Edging - Tinker D - 05 Apr 2021

(04 Apr 2021, 09:35 )no smile Wrote:
(04 Apr 2021, 06:03 )essanym Wrote:
(03 Apr 2021, 20:08 )no smile Wrote: I think there is a whole diy kit doing the same.  It would cost much less if you can do it yourself...

EDIT ; found it : https://github.com/nogasm/nogasm

With the whole 3D print file, pcq gerber, program...

I've actually had a nogasm 99% done for months.  There is one part that, unfortunately, is also used in medical equipment like ventilators that is in short supply and has been for months.  None of the suppliers know when they will be available again.  I've done all the 3d printing, I had the circuit boards made in China (30 of them in white, btw) but I can't get the air pressure sensor I need so I can't even use the damn thing.  If any of you are interested in building one of these when all the parts are available, I'd be happy to help out however I can; 3d printing or soldering perhaps?

I don’t know where you are but I would gladly lighten you of one board  😁

Maybe the 3D print also.  We’ll get back when it’s again available  🤔
What air pressure sensor do you need?
Make, model, basic type or serial communication??

I may be able to locate something from my line of work.

RE: Edging - essanym - 06 Apr 2021

(05 Apr 2021, 17:00 )Tinker D Wrote: What air pressure sensor do you need?

NXP mp3v5050gp

I don't know how it communicates but you can look up the spec sheet. All I know is if I can't get that exact one, I wouldn't have a clue how to alter the code or the electronics to use a different one.

RE: Edging - Tinker D - 06 Apr 2021

Came up with this.