I ordered a few locking straps and a full locking gag harness and was eager to give the new toys a try. I've also been trying to include a cb6000s into my bondage sessions, as it helps maintain focus and prevents any accidental stimulation. Time to get dressed up and toss on some bondage!
[
attachment=45526]
[
attachment=45527]
Very nice! 2 locking straps around the knees, one strap for the ankles, my usual leather wrist cuffs, and a new gag harness.
[
attachment=45528]
After rolling around for a bit and trying to pose for the camera, it was time for an outfit change!
[
attachment=45529]
A quick change of my stockings and skirt and I'm ready to go again.
[
attachment=45530]
Oh dear! Is that skirt too short! It won't cover up anything. Too bad, let's get tied!
[
attachment=45531]
[
attachment=45532]
[
attachment=45533]
A one-way ring device was used for the ankle-to-head rope. This was my first time with this kind of hogtie and boy is it tight. I could roll from side to side, but there is little chance of moving around to retrieve any keys. You definitely need to plan a release that doesn't involve moving. My release?
The cuffs weren't locked.
Looks good here.
Yes, basically a test run to iron out the kinks before going all in.
I like it
Pretty much. I feel any time a new toy is used it should be added safely without any additional complications. In this case the new item was the gag harness and incorporating that into the hogtie. The ring device did pull things tight, but I could still undo my cuffs and reach the knots at any time.
The extra strain on my neck and the decreased mobility was something I wasn't quite expecting. You see pictures of all manner of ties and positions, but you don't really know how it feels until you try it. I did like having my wrists somewhat mobile and not connected to anything. Made getting out easier. Maybe next time the rope from the head could pass through the ankle strap, down through the knee strap, and connect to my wrists to make that more difficult. 😁
(11 Feb 2021, 07:27 )Frank Wrote: [ -> ]Pretty much. I feel any time a new toy is used it should be added safely without any additional complications. In this case the new item was the gag harness and incorporating that into the hogtie. The ring device did pull things tight, but I could still undo my cuffs and reach the knots at any time.
The extra strain on my neck and the decreased mobility was something I wasn't quite expecting. You see pictures of all manner of ties and positions, but you don't really know how it feels until you try it. I did like having my wrists somewhat mobile and not connected to anything. Made getting out easier. Maybe next time the rope from the head could pass through the ankle strap, down through the knee strap, and connect to my wrists to make that more difficult. 😁
Beware of this last one. I once did something like it (with rope only) and almost got stuck because of the numbness I got of tying the ring device too much… that was a scary one because I could not even use my safety scissors and I would have to wait the whole day with my hands out of use…
(Ok, to be honest, it was slightly more complicated because I also tied my elbows)
Wow, thank you for the warning! It's good to hear from someone who has tried connecting a head-ankle-wrist hogtie before. Side note: what's the term for this type of tie, a HAW hogtie? I thought that the added pressure on the wrists could be tough, so it's good to hear some testimony to that fact. Seems like any additional difficulty, like tying off shoulders or wrists, would add immense challenges to getting free. Good to know going forward, that this position is harder than it looks.
(11 Feb 2021, 10:36 )Frank Wrote: [ -> ]It's good to hear from someone who has tried connecting a head-ankle-wrist hogtie before. Side note: what's the term for this type of tie, a HAW hogtie?
Let's just call it "HAW hogtie" 😊
(10 Feb 2021, 22:19 )Frank Wrote: [ -> ]I've also been trying to include a cb6000s
I would strongly advice against any CB3000/CB6000 as they easily crack and then very painfully pinch!
(11 Feb 2021, 12:11 )Like Ra Wrote: [ -> ]I would strongly advice against any CB3000/CB6000 as they easily crack and then very painfully pinch!
I have heard of that happening. The devices I have are cheaper models so there is certainly a possibility of a joint failure. If I continue with this sort of play I will definitely look into something sturdier and more secure.
A number of years ago, there was a steel cock and ball cave. It would encase everything in steel and locks on. No erection can happen and no touching allowed.
I don’t know if anyone is selling these, but I had one eons ago and there was no way oh getting out of it once it’s locked on.
(11 Feb 2021, 19:12 )Tinker D Wrote: [ -> ]I don’t know if anyone is selling these, but I had one eons ago and there was no way oh getting out of it once it’s locked on.
Latowsky?
http://www.latowski.de/