Well, it’s here. Wow, almost 7 inches long.
It has a stainless steel base. The fitting you speak of does unscrew.
The tube is flexible. 5 pumps looks to be max.
It’s very smooth. Feels like you don’t need any lube at all.
May try it tonite.
Ok, the fitting for the pump does NOT unscrew. It’s connected to the knot bladder. The stainless steel cap looks glued as well, or it could be molded to it.
The tip is stainless but it’s the same as the metal tip on one of my catheter . So there is a flexible tube running the length of the dildo.
Now, how to connect a base.
A strip of stainless steel, like we used at Tollyboy, can be connected by a set of #6 stainless steel screws. This will work unless the end cap comes off.
As for the size? I should have picked one size smaller.
Maybe I’ll buy another.
By the way, I love the case it came in.
Is the whole construction flexible? At what angle (approximately) can you bend it?
I can pretty much bend it 75 degrees.
Not quite 90. 45 seems the safest.
Tried it a
eady. Actually, it slides in very easily. Once I inflate it 6 pumps, it does hold its position.
And, at 8 pumps, it’s not coming out. For me that is.
And I found no red spots after removal.
You can’t sit with it, but you can walk around if you have on a skirt on.
(31 Oct 2020, 00:05 )Tinker D Wrote: [ -> ]Tried it aeady. Actually, it slides in very easily. Once I inflate it 6 pumps, it does hold its position.
And, at 8 pumps, it’s not coming out. For me that is.
and no indication of it wanting to "walk" further in?
Is the silicone just above the steel collar flexible? as in this is where you clamp down on?
No. The base towards the knot is pretty much solid. But after the knot, it does bend. It not soft and squishy like the dildos we see that can be pushed out by squatting and pushing. And, it is not straight. It’s tapered.