camjam - looking for a upgrade

18 Replies, 5381 Views

(22 Oct 2018, 07:59 )madjack Wrote: @Like Ra was planning a session outdoors - did it ever happen?
😟
(This post was last modified: 22 Oct 2018, 14:16 by Like Ra.)
I would say he hasn’t gotten around to it yet.
But I like the outfit.
As for outdoors, when I was a lot younger, I lived on a 240 acre ranch. Lots of places for selfbondage.
Nowadays, the woods are full of homeless basterds that will steal anything for drug money. So no place is really open or safe for outside play.
This video is a bunch of clips on the different projects I'm working on,  most of them have easy release's because they are a work in progress. I'm into cheerleader dress up and safe pain. I’ve got over 180 hours of play time recorded. Here is some of it that might be of interest for your sessions.
 
First clip is on a bucket hanging legs from a tree. Might not seem difficult but it turned out a lot harder than you think, and if you fall off the bucket your left with your feet hanging higher in the air. I've not got the process down just yet but as tested just having the keys on the ground behind the bucket makes it a lot of fun trying to get them, and then when you fall off trying to get them you are left with a good(bad) situation. The fall isn’t that bad since your hand are aeady on the ground or inches away. More to work on.
 
Second clip & third, this is crazy. I’ve got a bungee cord some 100 feet long, stretched to the max it’s 250-300  feet and exerting a lot of pressure. I tie this around my legs with  a loop. I then cuff up and cut the release cord that is holding it, that is behind my back. The loop tightens around my legs. So the plan is to walk/run as fast as possible forward to release the pressure ASAP.  I’m just starting to work out the releases, pressure, and tie up points. Running in heels is always fun.
 
The clips 4 &5 is another game , in clip 4 I’m  walking around, placing keys on the ground at different  places that I’ll need in the next sessions, and then running to the car when I hear some cars or someone as getting to close. Then I tie up around my legs to some ropes that’s drag boards around behind me making it difficult to walk and get to the keys. I just clip my cuffs together as I’m I not sure  how this is going to work as I might get hung up and not able to get to the keys, I need some kind of back up release. Also there are people around so I might need to escape fast and run.
 
The last clips is the use of the 2 rings that pull tight and won’t release on a hogtie.  This is being replaced with the camjam. This is a standard tieup that went bad when I was able to break free without the knife
 
[url=

Source: https://www.pornhub.com/view_video.php?v...e79fc83454
]

Source: https://www.pornhub.com/view_video.php?v...e79fc83454
[/url]
Ok, saw your video.
Very nice, But.....
Your ring device rings are way too big.
Your ring device will work a lot better if you use 1 inch rings.
Also, when you thread the rope through the rings, do what I do. Put an extra loop through the rings. That will help to lock the rope.
Do it right, and you will need a knife to escape.
Love the video @DressBindFun - thanks for sharing!

My personal favourite is when you are hogtied on the bed - very sexy. 

I agree with @Tinker D that using smaller rings for your SRD would help, but have you considered using a 'rope ratchet' instead?

I used an SRD for years, but always had problems with it - either the ropes would twist as I pulled them tight or else they would slip during the session and I'd have to keep tightening them up. 

Once I switched to a rope ratchet all those problems where solved - and best of all it makes the most delicious noise when you pull it tight, every 'click-click-click' signaling your impending helplessness is very arousing.

Please keep posting about your adventures and techniques

MJ
(This post was last modified: 25 Oct 2018, 15:04 by Like Ra.)
TD, MJ

Ahh, thanks for the advice on the rings. I had tried several things but nothing worked. Reducing ring side never occurred to me. I went to the camjam(device that started this thread) and it need a modification too, but seems to be working better. I've looked at the rope ratchet, since I use one on my sailboat as a safety hold on the anchor, but they seemed to big. Like MJ, said every time I racket down the anchor I hear the click-click and think about how that would feel. I'll look around for a smaller one and give it a try. 

Overnight came up with a new idea, tested it a little in the garage this morning and it worked great,  it's a stiletto release. You must be wearing a pair of Stiletto's, and be able to maneuver them and work your way out.  More to come as I test it our.  Later

DBF
TD, MJ,

all i can say is thanks, I took your advice and build a new ring set, smaller ring, 2 loops, work great ! I feel like a kid in a candy store or a kid with a new toy

DBF


Attached Files Thumbnail(s)
 newSRD.jpg   
Yep, that’s the way it’s done.
I made the same mistake when I tried it the first time.
(01 Nov 2018, 02:11 )Tinker D Wrote: Yep, that’s the way it’s done.
I made the same mistake when I tried it the first time.

It still doesn't work well enough, some time real smooth other times not. I find the racket devices are a little better. 

I'm working on a improved SRD device but I'm not there yet.


Attached Files Thumbnail(s)
 IMG_0635.JPG     IMG_0636.JPG