Hogtie with timer padlock

[Anne]

Another hogtie with a timer padlock, still trying out small variations in upper body bondage and the way the release is supposed to work. This one worked as I was stuck until the padlock released but the bondage was not as strict as in other sessions.

Source: https://www.pornhub.com/view_video.php?v...dfe3023107

[madjack]

Wonderful.... again!

Proves that a relatively simple tie can be just as effective as a complex one.

I was particularly interested in the (box tie?) of your wrists, that looked more comfortable than the usual hand-to-hand method I use. Is it comfortable?

Also, is it tight enough to prevent escape? I wondered if you might have been able to slide one arm past the other?

I had to smile when I spotted you encounter the problem that often thwarts my plans when using a rope-ratchet - the knot stopping more rope from being pulled through the ratchet. Its really annoying sometimes and I've not yet found a simple method to fix it, especially when trying a hogtie. 

Did you really hear the 'click' as the padlock released or was it happy coincidence (or expert counting down in your head)?

I was amused to spot that I'm not the only one to tuck things into my clothing to be used in my sessions, though I don't recall ever trapping a padlock under a swimsuit against my bum!  😁

Was that final padlock also electronic? I couldn't quite tell and wondered if it was a second, back-up, release option.

I think I need to invest in one or two of these digital locks, and re-read you post on the multi-ring set-up to avoid stress on the hasp. 

A great video and, as always, thank you for sharing and inspiring. 

MJ

[Anne]

Wonderful.... again!

Thanks!

Proves that a relatively simple tie can be just as effective as a complex one.
I was particularly interested in the (box tie?) of your wrists, that looked more comfortable than the usual hand-to-hand method I use. Is it comfortable?
Also, is it tight enough to prevent escape? I wondered if you might have been able to slide one arm past the other?

If you do a decent upper body tie, so upper arms to torso, then that tie for the wrists can be inescapable. With just three loops of a double rope pulled tight the friction alone will hold it tight enough to make it a real struggle. If you keep both wrists in position and just work the rope around a couple of times, with a few iterations between the wrists for good measure, and making sure you keep pulling it tight you won't even have to make a knot in the end. Hard to believe but make sure you have scissors within reach when trying this for yourself.

It's very comfortable until I want to get out 😁

I had to smile when I spotted you encounter the problem that often thwarts my plans when using a rope-ratchet - the knot stopping more rope from being pulled through the ratchet. Its really annoying sometimes and I've not yet found a simple method to fix it, especially when trying a hogtie.

That's usually poor planning on my part but in this case I didn't mind as I wasn't sure how tight the bondage was going to be and with the combination of upper arms and wrists tied like that being surprisingly hard to escape I wasn't planning on making the hogtie to strict. I needed some mobility left in case I needed to cut my way out.

Did you really hear the 'click' as the padlock released or was it happy coincidence (or expert counting down in your head)?

I heard the click, I knew it was coming so I was waiting for it. I have two padlocks and one beeps and the other doesn't for some reason but there is a motor buzz and an audible click.

I was amused to spot that I'm not the only one to tuck things into my clothing to be used in my sessions, though I don't recall ever trapping a padlock under a swimsuit against my bum! 😁

Girls' clothes don't have pockets, I have to keep that somewhere and I can't reach it if my hands are tied up high on my back.

Was that final padlock also electronic? I couldn't quite tell and wondered if it was a second, back-up, release option.

It's one of the smart padlocks, they open with an app over Bluetooth or by fingerprint but I didn't register any valid fingerprints on this one.

I think I need to invest in one or two of these digital locks, and re-read you post on the multi-ring set-up to avoid stress on the hasp.

It's quite a hassle to setup as they can't be added to any automated scene, only controlled manually by pressing and holding a button on the app. So for them to be timed you need to setup some automation software on your phone. I have some experience with this as I used this for automation tests for an Android app I wrote but it's still a bit of a pain. My script loops over the steps in case the Bluetooth connection failed so it opens the app, goes to the lock, waits for a bit, tries to open the lock a few times, closes the app and tries again and again until I manually stop it. I wonder if it's easier if I install the app on a virtual phone and control everything from Android Studio. Less chance of something random popping up and ruining the run.

A great video and, as always, thank you for sharing and inspiring.
MJ

Thanks again!