Chastity The good! & The bad!

[Like Ra]

Four days!

So, it's five days! Pulling out was a bit painful, but when I unlocked the cage, it easily came off. There were a couple of bruises - possibly the result of my attempts "to cheat" and pull out.

It works! Without the key, I would definitely not recommend trying to get out of the cage, for at least 3-4 days.

[madjack]

Four days!

So, it's five days! Pulling out was a bit painful, but when I unlocked the cage, it easily came off. There were a couple of bruises - possibly the result of my attempts "to cheat" and pull out.

It works! Without the key, I would definitely not recommend trying to get out of the cage, for at least 3-4 days.

Impressive and interesting.
I've just clocked up 60hrs of continuous chastity - a new PB! 

.And still going! I'm trying for 72hrs now, without the assistance of glue!

 Here's a strange thing (though it chimes with what @Like Ra has said) I'm finding myself in an almost constant state of semi-arousal, but without the usual side-effects (for me that is aching balls) 

Highlights so far have been the 3 mornings of waking up and feeling the cage tight around my cock and balls... very exciting, doubly so when wearing tights as well. 

Dare I risk glue when I have a full 2 weeks 'home-alone' later in the year? 

MJ

[Like Ra]

I've just clocked up 60hrs of continuous chastity

I've done a bit less than 3 weeks (combined) - diff cages.

Here's a strange thing (though it chimes with what @Like Ra has said) I'm finding myself in an almost constant state of semi-arousal, but without the usual side-effects (for me that is aching balls) 

Yep, especially if the cage is long enough to allow some movement inside. If the cage is very small, "the whole construction" shifts forward.

Dare I risk glue when I have a full 2 weeks 'home-alone' later in the year?

Beware of possible irritation and skin tears. And do not use too tight rings.

[unicast]

Have been fascinated by such a toy: https://vi.aliexpress.com/item/1005006151809642.html

So I bought it (the version with straight ring and without spikes). Two big things. First, it is surprisingly comfortable to be in. And the second, any attempt for an erection, which is, of course, absolutely impossible, is an awesome combination of hell and heaven. Compeletly different feeling than anything else. I discovered that I really like to be locked in.

[charlottesaysyes]

So we have been into Chastity for maybe a year and a half (it was our gateway drug that led to feminisation, hypnosis, femdom etc etc)

I don't go 24/7, we kept trying but it just really impacted my sleep (i dont sleep well anyway) and i was just tired, unproductive, and useless - would love to find a cage where i can go through the night)

So we have a ritual every morning, she locks me, and unlocks me when needed (bed, or when going to certain places where she deems it inappropriate) which works for us.


Sooo , long story shot, i currently use a cobra knock off, it works, but looking for a new cage

• must be available in europe as i can not be bothered with import costs
  
  
• not into sounding
  
  
• resin,  3d print, steel - open to anything
  
  
• needs to fit tight, and not allow any action down there
  

i've mulled over things like the Vice just cannot decide!!!!


and apparently my grammar is attrocious this morning

[Iniga]

The Cobra clone which you have I actually find to be pretty good for the price in the two smallest sizes (the larger ones tend to fracture at the base of the cage and are not safe - sharp pointy bits): They are breathable, fairly easy to keep clean (unlike the HT types), light & comfy (especially when small & in the morning - any growth happens inside of you if the ring size is correct or you wear a snug cotton thong or chastity helper belt e.g. https://www.amazon.de/-/en/gp/product/B0CYC36FSG/ ). Need to be careful when putting them on & not to pinch anything with those two tabs into the ring though.

If you want to stay with printed, Josielynn's cheery keepers are really nice and ship from NL for orders inside the EU. They come in a lot of different forms, sizes and various multiple types of rings and cage angles (for the gap-size). Unless you buy the more expensive "egg-shell" finish, they are a bit rougher than the Cobra [clones], but you can use nail polish to make them smoother and paint them with any color you prefer (cured UV nail polish works best): https://www.shapeways.com/shops/josielyn...-jewellery [cloudflare is reporting shapeways.com is down at the moment]. Unlike with the HT types with the internal lip insertion, you can use your current Cobra ring size as a guide. Finding the perfect ring size and angle/gap-size to fit your anatomy best can take a few tries.

The metal "bar" cages are the easiest to keep clean, but are heavier & the exposed lock (on most) will damage any delicate material it rubs against/gets caught on.... many of "stainless" cages offered on e.g. amazon & co. are not stainless steel, but chrome coated (with nickel etc.).. so be careful.

[charlottesaysyes]

The Cobra clone which you have I actually find to be pretty good for the price in the two smallest sizes (the larger ones tend to fracture at the base of the cage and are not safe - sharp pointy bits): They are breathable, fairly easy to keep clean (unlike the HT types), light & comfy (especially when small & in the morning - any growth happens inside of you if the ring size is correct or you wear a snug cotton thong or chastity helper belt e.g. https://www.amazon.de/-/en/gp/product/B0CYC36FSG/ ). Need to be careful when putting them on & not to pinch anything with those two tabs into the ring though.

If you want to stay with printed,  Josielynn's cheery keepers are really nice and ship from NL for orders inside the EU. They come in a lot of different forms, sizes and various multiple types of rings and cage angles (for the gap-size). Unless you buy the more expensive "egg-shell" finish, they are a bit rougher than the Cobra [clones], but you can use nail polish to make them smoother and paint them with any color you prefer (cured UV nail polish works best): https://www.shapeways.com/shops/josielyn...-jewellery [cloudflare is reporting shapeways.com is down at the moment]. Unlike with the HT types with the internal lip insertion, you can use your current Cobra ring size as a guide. Finding the perfect ring size and angle/gap-size to fit your anatomy best can take a few tries.

The metal "bar" cages are the easiest to keep clean, but are heavier & the exposed lock (on most) will damage any delicate material it rubs against/gets caught on.... many of "stainless" cages offered on e.g. amazon & co. are not stainless steel, but chrome coated (with nickel etc.).. so be careful.

thank you, i didn't know the cherry keepers ship from the NL as well. I've heard good things about them

[Iniga]

The Cobra clone which you have I actually find to be pretty good for the price in the two smallest sizes (the larger ones tend to fracture at the base of the cage and are not safe - sharp pointy bits): They are breathable, fairly easy to keep clean (unlike the HT types), light & comfy (especially when small & in the morning - any growth happens inside of you if the ring size is correct or you wear a snug cotton thong or chastity helper belt e.g. https://www.amazon.de/-/en/gp/product/B0CYC36FSG/ ). Need to be careful when putting them on & not to pinch anything with those two tabs into the ring though.

If you want to stay with printed,  Josielynn's cheery keepers are really nice and ship from NL for orders inside the EU. They come in a lot of different forms, sizes and various multiple types of rings and cage angles (for the gap-size). Unless you buy the more expensive "egg-shell" finish, they are a bit rougher than the Cobra [clones], but you can use nail polish to make them smoother and paint them with any color you prefer (cured UV nail polish works best): https://www.shapeways.com/shops/josielyn...-jewellery [cloudflare is reporting shapeways.com is down at the moment Edit => see below https://cherrykeeper.net/ ]. Unlike with the HT types with the internal lip insertion, you can use your current Cobra ring size as a guide. Finding the perfect ring size and angle/gap-size to fit your anatomy best can take a few tries.

The metal "bar" cages are the easiest to keep clean, but are heavier & the exposed lock (on most) will damage any delicate material it rubs against/gets caught on.... many of "stainless" cages offered on e.g. amazon & co. are not stainless steel, but chrome coated (with nickel etc.).. so be careful.

thank you, i didn't know the cherry keepers ship from the NL as well. I've heard good things about them

If you are interested in the Cherry Keeper just some thoughts:

- Yes, shipped and printed in NL 😁  so no extra taxes/customs fees etc for the EU at least. Have quite a few of them. Usually takes about a week. 
- If you want to splurge on the egg-shell finish, I find the ring is the most important & where friction & any irritation is most likely to happen (perhaps find the best ring size/shape/angle first, then get the egg-shell finish in that size... it is always good to have two+ cages 😉 ). 
- Personally (as a grower), I prefer cages which *only* hold the glans. This pushes everything else inside of me behind the ring - and all growth is then inside the body which is *much* more comfy (but does make you want to pee more often when it happens). Smaller cages also are not [as] noticeable under normal clothing, even with tight stretchy jeans. You can also use these to smooth out cage contours with more thin material (e.g. lycra, leggings etc) clothing: https://www.likera.com/forum/mybb/Thread...6#pid75946 . They also stop any damp spots to boot if you have been caged for a while and become a bit leaky with time as one may. 
- If you have a very large glans, there is a "wide" version for most of the CK cages, something most others do not have.
- I don't find the "head-lock" option all that useful, it can also cause an extra friction point around the base of the glans (I'm circumcised 🤷🏻‍♀️) if not exactly the right size.

[Iniga]

Shapeways apparently has gone bankrupt. JosieLynn's Cherry Keepers can still be ordered via
https://cherrykeeper.net/
For the EU "Shipments originate from the Netherlands", so that has not changed.

[Like Ra]

JosieLynn's Cherry Keepers

Absolutely useless in my opinion... Easily escapable 3D-printed design...