https://www.likera.com/forum/mybb/ Tue, 28 Apr 2026 02:58:38 +0000 MyBB https://www.likera.com/forum/mybb/Thread-out-with-friends-and-after-pvc Fri, 28 Feb 2025 11:53:28 +0000 latexslaafboy]]> https://www.likera.com/forum/mybb/Thread-out-with-friends-and-after-pvc next saturday (tomorrow) i'm going out with friends in amsterdam, and on the way back to get clothes in the garage and on the way back past a gas station and the Mac.

I think it will be around 1 pm.
Then I will change in the parking garage in Amsterdam when I go back home.
dildo plug xxl with belt
spiked latex  boxer and spiked   bra
Yellow pvc suit
Yellow punishment suit
Belt with timer lock
Yellow latex gloves
Wrist cuffs with locks
Yellow rubber boots
Collar with lock

And so long a petrol pump and the Mac along a4.
I have done it before, but looking for ideas to make it different..
see my web side latexslaafboy site
any help ?

  Gkp5SnbWcAAadOk.jpeg (Size: 372.15 KB / Downloads: 43) ]]> next saturday (tomorrow) i'm going out with friends in amsterdam, and on the way back to get clothes in the garage and on the way back past a gas station and the Mac.

I think it will be around 1 pm.
Then I will change in the parking garage in Amsterdam when I go back home.
dildo plug xxl with belt
spiked latex  boxer and spiked   bra
Yellow pvc suit
Yellow punishment suit
Belt with timer lock
Yellow latex gloves
Wrist cuffs with locks
Yellow rubber boots
Collar with lock

And so long a petrol pump and the Mac along a4.
I have done it before, but looking for ideas to make it different..
see my web side latexslaafboy site
any help ?

  Gkp5SnbWcAAadOk.jpeg (Size: 372.15 KB / Downloads: 43) ]]> https://www.likera.com/forum/mybb/Thread-Crossdressing-and-PVC-fetish Mon, 24 Jun 2024 10:29:48 +0000 LATEX J]]> https://www.likera.com/forum/mybb/Thread-Crossdressing-and-PVC-fetish
  PXL_20231011_220326213~2.jpg (Size: 311.98 KB / Downloads: 126)
  PXL_20231102_065310972.MP~2.jpg (Size: 1.83 MB / Downloads: 99)
  PXL_20230516_220156252~3.jpg (Size: 555.6 KB / Downloads: 91)
  PXL_20230525_020506990.MP~2.jpg (Size: 2.11 MB / Downloads: 115)
  20200104_101003.jpg (Size: 1.21 MB / Downloads: 105)

---

]]>
  PXL_20231011_220326213~2.jpg (Size: 311.98 KB / Downloads: 126)
  PXL_20231102_065310972.MP~2.jpg (Size: 1.83 MB / Downloads: 99)
  PXL_20230516_220156252~3.jpg (Size: 555.6 KB / Downloads: 91)
  PXL_20230525_020506990.MP~2.jpg (Size: 2.11 MB / Downloads: 115)
  20200104_101003.jpg (Size: 1.21 MB / Downloads: 105)

---

]]> https://www.likera.com/forum/mybb/Thread-PVC-vs-Latex Mon, 08 Nov 2021 20:51:26 +0000 llovellatex]]> https://www.likera.com/forum/mybb/Thread-PVC-vs-Latex
Thank you and I look forward to your answers!]]>
Thank you and I look forward to your answers!]]> https://www.likera.com/forum/mybb/Thread-sewing-pvc Sun, 26 Jan 2020 23:10:33 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-sewing-pvc
My first project was an old pvc cape (PUL-Enclosed Cape). I always wanted to have tight cape, while most capes are really wide. So I took some measurements and pinned two seams at the sides. Then, just to make sure, I tried it on (pins outside). It felt reasonably tight, so I sewed it.  You have to be careful, because even though the needle doesn't stick to the material, the material does to itself. Therefore, you have to keep it flat all the time. I have got some experience with "normal" cloth, and that is much easier. Well, the first seams weren't perfect, but good enough, and nobody will ever see it. After wearing the cape for a while, I decided, that it could be even tighter. So I marked new seams, tested with pins and sewed ahead. Still not good enough, I made a third line. Right now, this is almost, what I want. The cape is still fairly wide around the legs, but since there are no buttons, I have to get my shoulders through there as well. It is a bit of a challenge to get in already, because all the material gathers on the shoulders first. I have to find the bottom seam and slowly work it down. At first, I tried arms first, but around the chest, the cape is too narrow now to get them down, so I had to struggle out again.

I will make some photos over the next few days and report, how I get on.

Further projects: A hood in raincoat style (not a BDSM hood), but with an extra, poppers or velcro strips on the sides to attach another piece of pvc sheet in front of the mouth and nose. This piece shouldn't be too tight, I don't want to have trouble breathing. However, it should be impossible, to work it down and get the nose, or even the mouth, out.

PS: I forgot to tell: I had a bath in the cape after doing the first sewing. It is awesome! I think, resting in these salt-water tanks is a bit similar, except, that the cape doesn't allow for the senses to switch off completely. I spent quite a while in the tub, basically meditating. Actually, it was too pleasant to do anything else, which would have ended the situation...]]>
My first project was an old pvc cape (PUL-Enclosed Cape). I always wanted to have tight cape, while most capes are really wide. So I took some measurements and pinned two seams at the sides. Then, just to make sure, I tried it on (pins outside). It felt reasonably tight, so I sewed it.  You have to be careful, because even though the needle doesn't stick to the material, the material does to itself. Therefore, you have to keep it flat all the time. I have got some experience with "normal" cloth, and that is much easier. Well, the first seams weren't perfect, but good enough, and nobody will ever see it. After wearing the cape for a while, I decided, that it could be even tighter. So I marked new seams, tested with pins and sewed ahead. Still not good enough, I made a third line. Right now, this is almost, what I want. The cape is still fairly wide around the legs, but since there are no buttons, I have to get my shoulders through there as well. It is a bit of a challenge to get in already, because all the material gathers on the shoulders first. I have to find the bottom seam and slowly work it down. At first, I tried arms first, but around the chest, the cape is too narrow now to get them down, so I had to struggle out again.

I will make some photos over the next few days and report, how I get on.

Further projects: A hood in raincoat style (not a BDSM hood), but with an extra, poppers or velcro strips on the sides to attach another piece of pvc sheet in front of the mouth and nose. This piece shouldn't be too tight, I don't want to have trouble breathing. However, it should be impossible, to work it down and get the nose, or even the mouth, out.

PS: I forgot to tell: I had a bath in the cape after doing the first sewing. It is awesome! I think, resting in these salt-water tanks is a bit similar, except, that the cape doesn't allow for the senses to switch off completely. I spent quite a while in the tub, basically meditating. Actually, it was too pleasant to do anything else, which would have ended the situation...]]> https://www.likera.com/forum/mybb/Thread-rainwear-bondage Sat, 15 Dec 2018 11:20:41 +0000 latexslaafboy]]> https://www.likera.com/forum/mybb/Thread-rainwear-bondage https://www.likera.com/forum/mybb/Thread-Plastic-sheet-bondage Sun, 05 Feb 2017 20:57:37 +0000 hoboid]]> https://www.likera.com/forum/mybb/Thread-Plastic-sheet-bondage The problem is, its getting very expensive with time. A cheap alternative could be protection foil for glass windows. Worker/painter using them to protect windows against damages. They sell them on ebay in different sizes with a width of 25 cm up to 100 cm. I got 75cm width and take 2 strips and overlap them about 10cm to get a bis sheet.

These rolls are betwenn 10-20 EUR for a 100m Roll with a width of 50cm. They might not been so thick than the furniture wrap, but to fix you its enough, i tried several times with my girlfriend.


Its worth a try]]> The problem is, its getting very expensive with time. A cheap alternative could be protection foil for glass windows. Worker/painter using them to protect windows against damages. They sell them on ebay in different sizes with a width of 25 cm up to 100 cm. I got 75cm width and take 2 strips and overlap them about 10cm to get a bis sheet.

These rolls are betwenn 10-20 EUR for a 100m Roll with a width of 50cm. They might not been so thick than the furniture wrap, but to fix you its enough, i tried several times with my girlfriend.


Its worth a try]]> https://www.likera.com/forum/mybb/Thread-PVC-vinyl-plastic-polyethylene-photos-and-videos Mon, 19 Oct 2015 08:35:31 +0000 Like Ra]]> https://www.likera.com/forum/mybb/Thread-PVC-vinyl-plastic-polyethylene-photos-and-videos https://www.likera.com/forum/mybb/Thread-Tough-PVC Thu, 05 Feb 2015 04:59:21 +0000 dangersnert]]> https://www.likera.com/forum/mybb/Thread-Tough-PVC
Any ideas or suggestions would be greatly appreciated.

Thanks]]>
Any ideas or suggestions would be greatly appreciated.

Thanks]]> https://www.likera.com/forum/mybb/Thread-Ideas-Welcome-on-how-to-Re-build-my-PVC-Wardrobe Mon, 29 Dec 2014 13:43:15 +0000 AliD]]> https://www.likera.com/forum/mybb/Thread-Ideas-Welcome-on-how-to-Re-build-my-PVC-Wardrobe
So, I am starting from scratch, any suggestions on where to start would be very welcome 😊

I previously bought my stuff off eBay and Pvc-u-like. So I guess I will start looking there again. I am getting excited just thinking about re building my collection 😁]]>
So, I am starting from scratch, any suggestions on where to start would be very welcome 😊

I previously bought my stuff off eBay and Pvc-u-like. So I guess I will start looking there again. I am getting excited just thinking about re building my collection 😁]]> https://www.likera.com/forum/mybb/Thread-Sexy-catwoman Mon, 18 Nov 2013 03:24:11 +0000 Bobyao]]> https://www.likera.com/forum/mybb/Thread-Sexy-catwoman   25a0e1044fde11e39d0b1262e10b68c1_8.jpg (Size: 85.93 KB / Downloads: 366)

She is hot. This kind of classic catsuit is welcomed by women. Have you tried it ever?
Ps: I found it from a photo website.]]>   25a0e1044fde11e39d0b1262e10b68c1_8.jpg (Size: 85.93 KB / Downloads: 366)

She is hot. This kind of classic catsuit is welcomed by women. Have you tried it ever?
Ps: I found it from a photo website.]]> https://www.likera.com/forum/mybb/Thread-useful-tips-for-buying-pvc-suits Thu, 05 Sep 2013 04:09:44 +0000 zentaidude]]> https://www.likera.com/forum/mybb/Thread-useful-tips-for-buying-pvc-suits so you'd better find a store that can custom make it according to your measurements (without costing you any extra)
I am pro at buying these stuffs online and you may let me know your questions if you have and I would be glad to post here
by the way,The store I recommend to you is zentaizone.com]]> so you'd better find a store that can custom make it according to your measurements (without costing you any extra)
I am pro at buying these stuffs online and you may let me know your questions if you have and I would be glad to post here
by the way,The store I recommend to you is zentaizone.com]]> https://www.likera.com/forum/mybb/Thread-Tron Tue, 30 Jul 2013 10:19:10 +0000 tom_fisher]]> https://www.likera.com/forum/mybb/Thread-Tron http://www.artificeclothing.com/em/shop/...olours.asp

Very cool looking PVC outfits with the glow in dark trim.
]]> http://www.artificeclothing.com/em/shop/...olours.asp

Very cool looking PVC outfits with the glow in dark trim.
]]> https://www.likera.com/forum/mybb/Thread-PVC-Bedclothes-an-experience Fri, 18 May 2012 13:04:13 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-PVC-Bedclothes-an-experience
Sizing: The bedsheet was exactly the size indicated, i.e. not - as expected - it is not suitable for a matress of that size. For duvet cover and pillowcase I didn't know exactly the sizes, but my estimations worked well.

Pillowcase and duvet cover have no zipper, the openings stay open. That's probably bad for those, who like watersports, but no real concern for me.

Material: The pvc is strong, outside shiny and the inside rough-dull. there is a strong typical pvc-smell, which, according to some customer reviews fades quickly. Actually, the backside is not sexy at all, but it remains invisible while in use.

Well, I decided to spend one night in my new bedclothes - naked, for a complete experience. On the first touch, the pvc is cold, but it warms up quickly. My duvet is fairly heavy and so the pvc hugged nearly all of my skin. I tried to read a book, but the constant stimulation from the pvc kept my brain too busy and so I decided to sleep. Once in a suitable position, the special pvc-feeling slowly faded, I calmed down and would have been able to sleep. But there is another effect of the pvc, it reflects heat. After a little while, I was almost boiling and so I had to give up. In the end, I wrapped myself into the bedsheed, finished the experiment and turned my bed back to normal.

PVC bedclothes are certainly good for having sex and watersports, to impress your fellow fetishists or shock your family, but unless you are used to sleep in a sauna, they are not suitable for sleeping. This is especially important for those, who like to spend their nights in timed bondage. Well, it goes over the normal bedclothes and can be taken off in seconds.]]>
Sizing: The bedsheet was exactly the size indicated, i.e. not - as expected - it is not suitable for a matress of that size. For duvet cover and pillowcase I didn't know exactly the sizes, but my estimations worked well.

Pillowcase and duvet cover have no zipper, the openings stay open. That's probably bad for those, who like watersports, but no real concern for me.

Material: The pvc is strong, outside shiny and the inside rough-dull. there is a strong typical pvc-smell, which, according to some customer reviews fades quickly. Actually, the backside is not sexy at all, but it remains invisible while in use.

Well, I decided to spend one night in my new bedclothes - naked, for a complete experience. On the first touch, the pvc is cold, but it warms up quickly. My duvet is fairly heavy and so the pvc hugged nearly all of my skin. I tried to read a book, but the constant stimulation from the pvc kept my brain too busy and so I decided to sleep. Once in a suitable position, the special pvc-feeling slowly faded, I calmed down and would have been able to sleep. But there is another effect of the pvc, it reflects heat. After a little while, I was almost boiling and so I had to give up. In the end, I wrapped myself into the bedsheed, finished the experiment and turned my bed back to normal.

PVC bedclothes are certainly good for having sex and watersports, to impress your fellow fetishists or shock your family, but unless you are used to sleep in a sauna, they are not suitable for sleeping. This is especially important for those, who like to spend their nights in timed bondage. Well, it goes over the normal bedclothes and can be taken off in seconds.]]> https://www.likera.com/forum/mybb/Thread-quilted-pvc Thu, 24 Feb 2011 13:33:39 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-quilted-pvc http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=250777622797&ssPageName=STRK:MEWAX:IT

I am on a budget right now, but this looks interesting. The seller says that he makes this stuff by himself, could be worth asking him for other stuff.]]> http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=250777622797&ssPageName=STRK:MEWAX:IT

I am on a budget right now, but this looks interesting. The seller says that he makes this stuff by himself, could be worth asking him for other stuff.]]> https://www.likera.com/forum/mybb/Thread-Rain-Skirts-makers-and-sellers Fri, 17 Dec 2010 21:50:26 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Rain-Skirts-makers-and-sellers
This one makes skirts from used tents:

http://www.therainskirt.com/

Outrageously expensive but also rainskirts:

http://www.rainskirts.com/products

I am a maker of rainskirts too, but I haven't gone commercial yet 😁
(http://www.likera.com/forum/mybb/showthr...24#pid3124)

I will update this list occasionally.]]>
This one makes skirts from used tents:

http://www.therainskirt.com/

Outrageously expensive but also rainskirts:

http://www.rainskirts.com/products

I am a maker of rainskirts too, but I haven't gone commercial yet 😁
(http://www.likera.com/forum/mybb/showthr...24#pid3124)

I will update this list occasionally.]]>