<![CDATA[Like Ra's Naughty Forum - Strappado's Self-Bondage Experiments]]>

<![CDATA[Like Ra's Naughty Forum - Strappado's Self-Bondage Experiments]]> https://www.likera.com/forum/mybb/ Fri, 17 Apr 2026 11:42:04 +0000 MyBB <![CDATA[Not exactly a straightjacket]]> https://www.likera.com/forum/mybb/Thread-Not-exactly-a-straightjacket Tue, 26 Mar 2024 20:06:15 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Not-exactly-a-straightjacket

.jpg

s-l1600c.jpg (Size: 85.3 KB / Downloads: 73)
.jpg

s-l1600a.jpg (Size: 61.77 KB / Downloads: 57)
.jpg

s-l1600.jpg (Size: 61.8 KB / Downloads: 56)

I would like to have a leotard like this, or like this: https://www.likera.com/forum/mybb/showth...p?tid=3865 but well, this is a start.

Quality seems fine, thickness 0,6mm, just tight enough on the belly and just wide enough to fit the upper body including arms. It is a bit snugger on my torso by the way, but not much.

At first, I tried to get in the conventional way, close the zipper only a little bit, then pull it up with a string on a hook, while trying to wrap it around my torso, arms and shoulders. Well, this didn't work at all.

So I closed the zipper, leaving just enough space to get my head through the collar, then closed it completely. Then I pulled it over one shoulder and arm, then got the other arm in. A bit of adjustment around the waist, and it felt like the arms weren't going anywhere by themselves anymore. Of course, that process is easily reversible. Then I pushed one hand (arms crossed over the chest) up to the collar and got it over my mouth. So I could breathe in the air from the inside and breathe it out through my nose (outside), creating quite a vacuum. When I let go of the collar, it snapped back, hardly letting any air in. My arms felt like glued in place, every movement was "sucked back" by the vacuum, no air entered through the lower end. After a few minutes, some more decisive movements created very squeaky noises and the air was back in. That was to be expected of course, but still, a very nice illusion of being helpless (before the noises, that is). Getting out doesn't happen by accident, only by determination.

Actually, this could be a pretty good basis for an inescapable cling-film selfbondage. Not sure, if I will ever try, because I have no idea how to get out without help then 😉

I got this top on ebay Germany, but cannot find an active offer anymore. I might have bought the last one. Of course, it might pop up again.]]>

.jpg

s-l1600c.jpg (Size: 85.3 KB / Downloads: 73)
.jpg

s-l1600a.jpg (Size: 61.77 KB / Downloads: 57)
.jpg

06.jpg (Size: 161.44 KB / Downloads: 291)

.jpg

41TIQnuGBPL._AC_.jpg (Size: 13.29 KB / Downloads: 250)

I can put it on right out of the box, like this: Open the collar front zipper enough to get my head through, then close it again. Then get the shoulders into the shoulder parts. Now, there is a bag stretched between my shoulders and going down to near my elbows. I then get the left elbow in, followed by the right elbow, then the hands. The material is a bit stretchy, which makes it quite easy. Then wiggle the arms, until they are in a comfortable position, hands grabbing the opposite elbows. This is quite snug and comfortable, the arms are perfectly held in place. Of course, getting out is just as easy as getting in, so no real deal...

Next I tried to use a belt with a self-securing buckle, to pull the inside rim of the bag up, making it harder or even impossible to get the arms out, when it is tight. At first, I wrapped the belt around my shoulders, backpack-style, and fed it through the lacing on the inside of the bag - see my drawing, there is a lacing going from the back of the neck down the entire bag. This might work, but the belt was too short and I had to get another idea.

The working idea is illustrated in my drawing below. I fed the belt through the end of the lacing and stepped through, when I put on the armbinder, the end of the belt attached to a door handle. When the arms were in position and everything felt in place, I ducked under the belt to get it around the back of my neck (the drawing shows the front of the armbinder, which is against my back). Then I tightened the belt by stepping away from the door. And this was quite effective! The belt didn't pull the lower rim up as much as I hoped for, but it pushed the bag against my back and so the arms were trapped between the bag, my back and the belt. It was quite a struggle, to get out again. Eventually, I had one arm out and it took me about another minute or so, to losen the belt (the buckle works like the "ring device").

.png

06.jpg (Size: 161.44 KB / Downloads: 291)

.jpg

boxbinder.png (Size: 105.41 KB / Downloads: 244)

Almost forgot: The quality is low, cheap zipper, very thin lacing. But the material is soft and smells like PU (raincoat material).

I hope, this post is clear enough. If not, ask. I am not sure, if I can take photos...]]> <![CDATA[Latex climb in balloon non-technical thread]]> https://www.likera.com/forum/mybb/Thread-Latex-climb-in-balloon-non-technical-thread Tue, 25 Jun 2019 20:20:39 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Latex-climb-in-balloon-non-technical-thread
One more technical detail though: Once the ballon has been inflated for a while, it is wide enough to get in without inflating it first. Even with your entire body inside, the balloon is so flexible, that it will be difficult to break. Full inflation corresponds to a flat width and length of more than 2.8 m! So, there is no need to inflate the ballon each time you want to play!

When I initially pulled the brand new non-inflated balloon over my head - I simply had to try it, it was very intense. Very snug fit around the neck, you only get to breathe the air, that is inside. The view was zero, the sound of rubber very loud. I am not into breath play, so this was only a short test.

After inflating the balloon to almost 2000 l, sticking the head inside was quite different. It is another world. I could see the light sources (lamp and bright walls reflecting the light), and a purple and very finite (about 1 m) world. Even though my body was outside, I felt mostly inside the balloon, pretty much reduced to my head and hands (which were holding the balloon). If it weren't problematic for breathing, I would like to have a small balloon, just twice the size of my head. It is not the same as a mask. Perhaps breathing could be solved with some clever piping and perhaps a "breathing gag". I like gags anyway, so that sounds like a cool combination.

Inside head to hips: This is very special too. enough air to breathe for perhaps an hour (let's say 30 minutes for security's sake), again, another universe. I want to try this with less air. With a breathing device (see above), I would like to have most air out as well. Vacuum could be very intense like this, but a bit too risky, I think. On the other hand, the balloon is natural latex, it should be possible to glue in a hose for the mouth. I might try that later. It will probably destroy the ability to fully inflate the balloon, but that doesn't matter so much. Sticking your head out of a fully inflated balloon looks much nicer than it feels.

Completely inside with all air escaped, feet near the opening. Less confining than one might think. It is a bit like being under the bedsheets (for hidden reading or whatever). I suppose, crocodiles have less space in their eggs before they hatch.

The fetal position, head out: This is my preferred position so far. You can roll about, suck out air and get almost immobile. I want to get a flexible tube to suck out air, while my head is completely outside, so I can create a vaccum with my hands far away from the opening (and escape much harder, as I hope). Apart from the fetal position, you can sit up in various postures, just a matter of stretching and moving parts of the balloon accordingly. Eventually, you might have to let some air in or out.

Stretched out, head out: Nice, but heave weight on the shoulders. I think, a tight sleeping bag is much nicer. Without vacuum, there is enough space near the hands, so you could tie yourself up, then use a tube to vacuumise yourself in. Not sure, if the final step would include breaking the balloon, if the tube has a one-way valve...

And there is one more way to "wear" the balloon: Feet to hips (or higher). No more walking, You can vacuum the balloon easily too. In the bath, you could even fill it with water and then try to get the rest of the body in. I might try that...

Ok, these are the main ideas, I have come up with so far. Remember the re-breathing issues, when the head is inside.]]>
One more technical detail though: Once the ballon has been inflated for a while, it is wide enough to get in without inflating it first. Even with your entire body inside, the balloon is so flexible, that it will be difficult to break. Full inflation corresponds to a flat width and length of more than 2.8 m! So, there is no need to inflate the ballon each time you want to play!

When I initially pulled the brand new non-inflated balloon over my head - I simply had to try it, it was very intense. Very snug fit around the neck, you only get to breathe the air, that is inside. The view was zero, the sound of rubber very loud. I am not into breath play, so this was only a short test.

After inflating the balloon to almost 2000 l, sticking the head inside was quite different. It is another world. I could see the light sources (lamp and bright walls reflecting the light), and a purple and very finite (about 1 m) world. Even though my body was outside, I felt mostly inside the balloon, pretty much reduced to my head and hands (which were holding the balloon). If it weren't problematic for breathing, I would like to have a small balloon, just twice the size of my head. It is not the same as a mask. Perhaps breathing could be solved with some clever piping and perhaps a "breathing gag". I like gags anyway, so that sounds like a cool combination.

Inside head to hips: This is very special too. enough air to breathe for perhaps an hour (let's say 30 minutes for security's sake), again, another universe. I want to try this with less air. With a breathing device (see above), I would like to have most air out as well. Vacuum could be very intense like this, but a bit too risky, I think. On the other hand, the balloon is natural latex, it should be possible to glue in a hose for the mouth. I might try that later. It will probably destroy the ability to fully inflate the balloon, but that doesn't matter so much. Sticking your head out of a fully inflated balloon looks much nicer than it feels.

Completely inside with all air escaped, feet near the opening. Less confining than one might think. It is a bit like being under the bedsheets (for hidden reading or whatever). I suppose, crocodiles have less space in their eggs before they hatch.

The fetal position, head out: This is my preferred position so far. You can roll about, suck out air and get almost immobile. I want to get a flexible tube to suck out air, while my head is completely outside, so I can create a vaccum with my hands far away from the opening (and escape much harder, as I hope). Apart from the fetal position, you can sit up in various postures, just a matter of stretching and moving parts of the balloon accordingly. Eventually, you might have to let some air in or out.

Stretched out, head out: Nice, but heave weight on the shoulders. I think, a tight sleeping bag is much nicer. Without vacuum, there is enough space near the hands, so you could tie yourself up, then use a tube to vacuumise yourself in. Not sure, if the final step would include breaking the balloon, if the tube has a one-way valve...

And there is one more way to "wear" the balloon: Feet to hips (or higher). No more walking, You can vacuum the balloon easily too. In the bath, you could even fill it with water and then try to get the rest of the body in. I might try that...

Ok, these are the main ideas, I have come up with so far. Remember the re-breathing issues, when the head is inside.]]> <![CDATA[PU Straightjacket]]> https://www.likera.com/forum/mybb/Thread-PU-Straightjacket Mon, 07 May 2018 22:19:38 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-PU-Straightjacket https://www.amazon.de/ZWANGSJACKE-Kunstl...wangsjacke
https://www.amazon.de/gp/product/B082RTQ...9101397f62

got this a few weeks ago, and it is great, even though the straps could be a little stronger.

The arm length is just right for me, could be a few centimeters more, but it isn't really necessary. I can enter the straight jacket with the back straps closed as tight as I like them (almost fully tight), then attach the arms to each other and get that arm-strap over my head, down the back. Of course, the back straps are in the way a bit, but it is quite doable. Due to the fairly thick material (I guess, near 1 mm), it is hard to operate any strap, so attaching the crotch straps (there are two, nice for men!) is a challenge, but it feels even nicer when they are on. The sleeves are tight - bodybuilders might not be able to use this jacket, but yeah, even nicer for me, it is a very snug fit. With a lot of fiddling and a long ladle in my mouth for more manipulation, I even manage to close the chest strap around the arms / wrists - almost as tight as I like.

Once everything is in place, this jacket feels great! As soon as I have the opportunity, I will try to sleep in this jacket (and possibly fail, as usual). it also looks nice, I actually got the pink version and have a pink PU-skirt to wear along (over the crotch straps of course).

Well, one of these random purchases that really paid off.

Escapability: Yes
Safety: Quite - one could argue about the high collar, but I think, it is safe.
Security: Perhaps in partner play, otherwise, you cannot tighten the arms enough to make it secure... well, change the strap to somthing self-tightening and add an ice lock perhaps
Quality: Good workmanship, just the straps could be slightly stronger. But they seem to survive standard use quite well and this weakness might be a blessing, when you seem to be stuck... And the colour is just great - I love dark pink!

There is one extra feature for the succesful escapist: Unless (or perhaps even then) the jacket is really lose, it takes quite a while to get it off. The inside does not glide on skin, especially not, when wet. It usually takes me up to two minutes to take it off. This is with closed back straps of course, otherwise it should be quite easy. But due to the slightly short length of the sleeves, I cannot operate the back straps...]]> https://www.amazon.de/ZWANGSJACKE-Kunstl...wangsjacke
https://www.amazon.de/gp/product/B082RTQ...9101397f62

got this a few weeks ago, and it is great, even though the straps could be a little stronger.

The arm length is just right for me, could be a few centimeters more, but it isn't really necessary. I can enter the straight jacket with the back straps closed as tight as I like them (almost fully tight), then attach the arms to each other and get that arm-strap over my head, down the back. Of course, the back straps are in the way a bit, but it is quite doable. Due to the fairly thick material (I guess, near 1 mm), it is hard to operate any strap, so attaching the crotch straps (there are two, nice for men!) is a challenge, but it feels even nicer when they are on. The sleeves are tight - bodybuilders might not be able to use this jacket, but yeah, even nicer for me, it is a very snug fit. With a lot of fiddling and a long ladle in my mouth for more manipulation, I even manage to close the chest strap around the arms / wrists - almost as tight as I like.

Once everything is in place, this jacket feels great! As soon as I have the opportunity, I will try to sleep in this jacket (and possibly fail, as usual). it also looks nice, I actually got the pink version and have a pink PU-skirt to wear along (over the crotch straps of course).

Well, one of these random purchases that really paid off.

Escapability: Yes
Safety: Quite - one could argue about the high collar, but I think, it is safe.
Security: Perhaps in partner play, otherwise, you cannot tighten the arms enough to make it secure... well, change the strap to somthing self-tightening and add an ice lock perhaps
Quality: Good workmanship, just the straps could be slightly stronger. But they seem to survive standard use quite well and this weakness might be a blessing, when you seem to be stuck... And the colour is just great - I love dark pink!

There is one extra feature for the succesful escapist: Unless (or perhaps even then) the jacket is really lose, it takes quite a while to get it off. The inside does not glide on skin, especially not, when wet. It usually takes me up to two minutes to take it off. This is with closed back straps of course, otherwise it should be quite easy. But due to the slightly short length of the sleeves, I cannot operate the back straps...]]> <![CDATA[Very real elbow bondage]]> https://www.likera.com/forum/mybb/Thread-Very-real-elbow-bondage Thu, 12 Nov 2015 23:11:58 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Very-real-elbow-bondage http://www.likera.com/forum/mybb/showthr...p?tid=1716), I found a way to tie my elbows together pretty tightly. Two pieces of rope are used to make cuffs above the elbow, a third piece is used to tie them together.

A few days ago, I put on a bra with silicone breasts and a pvc maid dress with long arms. Then added the rope cuffs for the arms. I then folded a long piece of rope and fed this through both cuffs twice, then fed the ends of that long rope through the fold - sort of a self-tightening loop. I then knotted the ends of that rope together to hang it over a hook and pull tight. It seemed, that two wraps (feeding through the cuffs) were just right. When I pulled tight, my arms got together. When I losened, there was not enough tension to keep the arms together. The long rope then went over one shoulder, back, then over the other shoulder, then around the chest once or twice. Then I wound it around my wrists and made a few loops around the waist, until I ran out of rope, and secured the end where I could reach it later. And enjoyed it for a little while.

After perhaps 5 minutes, I felt a light pain in the arms which I tried to ignore (I am not into pain). As long as I moved my arms, it was okay and I even considered starting a movie. Well, a few minutes later I decided to get free because the pain was growing stronger and I felt my fingers going numb.

Undoing the wrist ties and unwrapping the rest was easy. But, to my surprise, my elbows were stuck together. I even checked in the mirror if I had forgotten something, but there was only the rope cuffs and the short - still very tidy - double-loop of rope in between. I tried as hard as possible. That was painful but didn't help at all. So I even tried to pull the rope tighter, because I hoped that once it moved, the rope could move in both directions - in vain. I tried to grab the loops, but they were out of reach. I could get to the rope cuff of the other arm, but not grab it. So I decided to use scissors to cut one cuff. Good idea in theory, I might have succeeded, but then I looked at the sleeve of my brand new maid outfit and put the scissors away.

So, I was stuck. I looked down at my shiny dress with the big breasts and naked * legs, while considering to ask someone for help. Try to imagine that situation for yourself. If I remember it now, it is very amusing and also arousing. I would do this again, if I had a companion.

I was able to manage the pain by assuming various poses, while I was looking for a solution. So, I actually took a photo, unfortunately bad quality. But I even retied my wrists just a little bit, for a better look 😁

.jpg

elbow-tie.jpg (Size: 19.82 KB / Downloads: 441)

Finally, I found a way out. It wasn't easy, and I won't count on it for another occasion. I remembered a trick to get a long worn wedding ring from the finger. It involves wrapping the finger with a string, feed the end of the string through the ring, then wrap it off again, while pulling on the ring with the string. Look for "Taras Kool" and "ring" (perhaps, not sure) to see, how it is done. Anyway, I had to get one cuff over my elbow, which is a similar task, and I had sleeves on. Meaning: Pull down the sleeve, block the cuff with the edge of a table, then try to get the sleeve up again, without moving the cuff. It took me a long time, perhaps even five minutes. It felt much longer! Finally, I had the cuff over the elbow, and somehow was very tempted to push it back. But the pain told me otherwise. So I pulled out my arm and then freed the other one by untieing the cuff. I tried to shift it down, but it wasn't possible.

Well, this was interesting and scary. Fortunately, not life threatening. But it took hours before my arms were back to normal. I still wonder, why they weren't sour the next day. I have learned something and the next time, I will add a rescue knot to release the elbow tie instantly, if needed. On the good side, this will allow me to be much more reckless with the rest of the bondage. I have overdone rope bondage before, but scissors or a knife were always a reliable way out, because the very string to cut is usually in an accessible place.

I hope you enjoyed this little report. If you are into rope self bondage, consider twice before you try to do this alone. I really wonder, how long I would have waited until calling help. I was definitely too cute to meet anyone else 😁 Perhaps, I would have called 911 in the end. I did this once a long time ago, and they were very nice about it.

*hairy (didn't want to put that into the story itself, it could be a downer)]]> http://www.likera.com/forum/mybb/showthr...p?tid=1716), I found a way to tie my elbows together pretty tightly. Two pieces of rope are used to make cuffs above the elbow, a third piece is used to tie them together.

A few days ago, I put on a bra with silicone breasts and a pvc maid dress with long arms. Then added the rope cuffs for the arms. I then folded a long piece of rope and fed this through both cuffs twice, then fed the ends of that long rope through the fold - sort of a self-tightening loop. I then knotted the ends of that rope together to hang it over a hook and pull tight. It seemed, that two wraps (feeding through the cuffs) were just right. When I pulled tight, my arms got together. When I losened, there was not enough tension to keep the arms together. The long rope then went over one shoulder, back, then over the other shoulder, then around the chest once or twice. Then I wound it around my wrists and made a few loops around the waist, until I ran out of rope, and secured the end where I could reach it later. And enjoyed it for a little while.

After perhaps 5 minutes, I felt a light pain in the arms which I tried to ignore (I am not into pain). As long as I moved my arms, it was okay and I even considered starting a movie. Well, a few minutes later I decided to get free because the pain was growing stronger and I felt my fingers going numb.

Undoing the wrist ties and unwrapping the rest was easy. But, to my surprise, my elbows were stuck together. I even checked in the mirror if I had forgotten something, but there was only the rope cuffs and the short - still very tidy - double-loop of rope in between. I tried as hard as possible. That was painful but didn't help at all. So I even tried to pull the rope tighter, because I hoped that once it moved, the rope could move in both directions - in vain. I tried to grab the loops, but they were out of reach. I could get to the rope cuff of the other arm, but not grab it. So I decided to use scissors to cut one cuff. Good idea in theory, I might have succeeded, but then I looked at the sleeve of my brand new maid outfit and put the scissors away.

So, I was stuck. I looked down at my shiny dress with the big breasts and naked * legs, while considering to ask someone for help. Try to imagine that situation for yourself. If I remember it now, it is very amusing and also arousing. I would do this again, if I had a companion.

I was able to manage the pain by assuming various poses, while I was looking for a solution. So, I actually took a photo, unfortunately bad quality. But I even retied my wrists just a little bit, for a better look 😁

.jpg

elbow-tie.jpg (Size: 19.82 KB / Downloads: 441)

Finally, I found a way out. It wasn't easy, and I won't count on it for another occasion. I remembered a trick to get a long worn wedding ring from the finger. It involves wrapping the finger with a string, feed the end of the string through the ring, then wrap it off again, while pulling on the ring with the string. Look for "Taras Kool" and "ring" (perhaps, not sure) to see, how it is done. Anyway, I had to get one cuff over my elbow, which is a similar task, and I had sleeves on. Meaning: Pull down the sleeve, block the cuff with the edge of a table, then try to get the sleeve up again, without moving the cuff. It took me a long time, perhaps even five minutes. It felt much longer! Finally, I had the cuff over the elbow, and somehow was very tempted to push it back. But the pain told me otherwise. So I pulled out my arm and then freed the other one by untieing the cuff. I tried to shift it down, but it wasn't possible.

Well, this was interesting and scary. Fortunately, not life threatening. But it took hours before my arms were back to normal. I still wonder, why they weren't sour the next day. I have learned something and the next time, I will add a rescue knot to release the elbow tie instantly, if needed. On the good side, this will allow me to be much more reckless with the rest of the bondage. I have overdone rope bondage before, but scissors or a knife were always a reliable way out, because the very string to cut is usually in an accessible place.

I hope you enjoyed this little report. If you are into rope self bondage, consider twice before you try to do this alone. I really wonder, how long I would have waited until calling help. I was definitely too cute to meet anyone else 😁 Perhaps, I would have called 911 in the end. I did this once a long time ago, and they were very nice about it.

*hairy (didn't want to put that into the story itself, it could be a downer)]]> <![CDATA[Device for Self-Mummification]]> https://www.likera.com/forum/mybb/Thread-Device-for-Self-Mummification Sun, 09 Dec 2012 12:34:49 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Device-for-Self-Mummification
My idea: Wrap yourself directly from the roll. Alternatively, you can wrap the pole, and then walk around the pole while wrapping yourself.

There are four flaws:

It doesn't require enough force to pull the clingwrap from the roll, the wrap on the body isn't tight. I need to create friction between the roll and the pole, or a "break", that holds the roll so you can pull tight. That break must be very simple, since you can't use your hands.

The position of the roll on the tube is fixed. In order to wrap your legs, you have to move away from the pole and do some absurd movements to get the wrap there.

Once finished, you have to find a way to cut the wrap from the roll.

Can't be used in summer, if the stand is used on your balcony.

The good points:
Simple design, the components look perfectly harmless and unsuspicious.
The stand (my stand) is heavy enough to withstand quite some pulling without falling over.
Can be used with cloth or adhesive tape as well.

I also tried a single-glove wrap. The pole has a good height for this. Doing this off the roll isn't tight enough to keep the elbows together but I achieved a nice package. With wraps around the shoulders, there would have been quite a challenge to get out.

I think, wrapping the pole first is better than wrapping off the roll, because you can control the height of the film. And as long as there is enough film on the pole, you can pull tighter easily. Of course, you have to walk around the pole quite often, the circumference of the pole is less than 30 cm. Not easy once you have started mummifying your legs.

As long as the legs are free, you can step over the line of film between your body and the pole. This lets you create neater wraps around the shoulders or between arms and back (armbinder style).

Another technique when wrapping palettes is to let the film run through your fingers, creating long straps which are stronger than the flat film. Might be useful to tie your wrists or ankles. Of course, you would need a replacement for the fingers, once they aren't available anymore.

.jpg

mummyall.jpg (Size: 60.25 KB / Downloads: 753) ]]>
My idea: Wrap yourself directly from the roll. Alternatively, you can wrap the pole, and then walk around the pole while wrapping yourself.

There are four flaws:

It doesn't require enough force to pull the clingwrap from the roll, the wrap on the body isn't tight. I need to create friction between the roll and the pole, or a "break", that holds the roll so you can pull tight. That break must be very simple, since you can't use your hands.

The position of the roll on the tube is fixed. In order to wrap your legs, you have to move away from the pole and do some absurd movements to get the wrap there.

Once finished, you have to find a way to cut the wrap from the roll.

Can't be used in summer, if the stand is used on your balcony.

The good points:
Simple design, the components look perfectly harmless and unsuspicious.
The stand (my stand) is heavy enough to withstand quite some pulling without falling over.
Can be used with cloth or adhesive tape as well.

I also tried a single-glove wrap. The pole has a good height for this. Doing this off the roll isn't tight enough to keep the elbows together but I achieved a nice package. With wraps around the shoulders, there would have been quite a challenge to get out.

I think, wrapping the pole first is better than wrapping off the roll, because you can control the height of the film. And as long as there is enough film on the pole, you can pull tighter easily. Of course, you have to walk around the pole quite often, the circumference of the pole is less than 30 cm. Not easy once you have started mummifying your legs.

As long as the legs are free, you can step over the line of film between your body and the pole. This lets you create neater wraps around the shoulders or between arms and back (armbinder style).

Another technique when wrapping palettes is to let the film run through your fingers, creating long straps which are stronger than the flat film. Might be useful to tie your wrists or ankles. Of course, you would need a replacement for the fingers, once they aren't available anymore.

.jpg

mummyall.jpg (Size: 60.25 KB / Downloads: 753) ]]> <![CDATA[Sleeping Bag Gloss PVC]]> https://www.likera.com/forum/mybb/Thread-Sleeping-Bag-Gloss-PVC Tue, 20 Nov 2012 19:30:55 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Sleeping-Bag-Gloss-PVC
Tonight, I will add to this post whenever something interesting happens - and I am still able to post. The first test is done, I have examined the bag in detail and found nothing disturbing.

.jpg

lacksleepsack.jpg (Size: 28.15 KB / Downloads: 327)
images from ebay offer

Upper left shows a general view, the views on the right side are a bit boring but you get an idea of the shape. The lower left shows the inside sleeves. By the way, the inside is sort of shiny, but not like that. The sleeve outside is shiny, exactly the same material as the outside.

Test 2

I undressed and got into the bag. The food compartment is small but not tight, I can make 1cm "steps". It felt so "glossy" that I checked, it is not. I pulled the zipper up to my hips or so, then put on the shoulder parts. Perfect length when I am standing. From inside, it was slightly harder to pull up the zipper, but not difficult. With a final "zzzp" it reached the top of the collar. I moved around a bit and found, that I'd rather not sit down on the floor or even kneel, because I am not sure, how strong the zipper is, it might pop open. I will have to put that to the test eventually, but right now, I have more important plans. The width is comfortable, only the shoulders could be a bit more narrow. But perhaps the width is necessary for the arms to get into the sleeves later on.

I opened the bag again and, laying on my bed, inserted my left arm into the left sleeve. Zipping up wasn't any more difficult this way. There wasn't much I could do with my left arm now, the sleeve is narrow and the only realistic movement is up and down. I could probably twist my bottom and reach my parts, but didn't try that. This is not a chastity device. I tried to remove the left arm from the sleeve, but I didn't succeed - good! By now, I was somewhat aroused, but opened the zipper and got out.

Test 3

I mounted a screw at the wall, about 70 cm above the floor. Then I put a string to the zipper handle and put the bag on again. It took me a while to get to another wall hook at face height, which was supposed to serve for closing the zipper. I inserted my left arm into the sleeve again, adjusted the shoulder on the left, then inserted the right arm into the other sleeve. It took me a while to get the other shoulder part onto the right shoulder, but I could do it. The string was attached to the hook, but I knew, I wouldn't do it. However, I stood there for a little while and wondered how it would be to simply try.

Ok, I didn't close the zipper, instead removed the right arm from the sleeve, put the right shoulder part in place and then, with both arms flat against my body inside the bag, tried to close the bag by pulling the string (moving back from the hook). I figured, that I either needed a shorter string or a higher hook, or another method for the last 20 cms. I found another method, grabbed the string with my teeth and got the zipper closed. OK, the first part accomplished, I can get in without using my arms or hands, so I should also be able to get in with both arms in the sleeves.

While closing the zipper, I already had noticed that the screw in the wall was too high for puling the zipper down. The string end was even lower than the screw. I looked around and found a bicycle stand with two "hooks" to hold the lower and diagonal pipes of the back-frame of a bike. It turned out, that the upper one was low enough. I had to reshape the noose at the end of the string to get it onto the hook, and fortunately (for later safety), I could do that with my mouth. With a bit of dangling and aiming, I got the noose onto the hook. Then I carefully started pulling. The zipper opened a little bit, then the string was too long again. So I pushed the stand over to get the hook down to the floor. This was low enough, I could open the zipper down to my belly. From my second experiment with both arms in the sleeves, I knew, that this was low enough, and I could have "walked" away to lower the zipper even more.

In theory, I have proven, that both, getting in and out with both arms inside the sleeves should be possible. But just for safety, I will try it a few more times before moving on to the final test. The bicycle stand is a good tool, I won't bother changing the screw. But I will shorten the zipper string a bit.

Test 4

I shortened the string to half its length, but it turned out that that was too short, I could not attach it to the hook on the wall. So I made it longer again and then I noticed that I would not need the wall hook at all. I can pull the string with my teeth, then drop it in a convenient place to grab a shorter length and close the bag. Opening went well so far, but I had to straighten the collar eventually, the zipper bent over instead of opening(1). Good enough for me!

Test 5
Time for the final test, close the bag completely with both arms inside the sleeves. No cheating possible, one arm would stay put even with the help of the second (free) arm, and certainly without help. And so I did. Getting the right shoulder on with the shorter string was a bit difficult, so I let go the string from the grip of my teeth and opened the bag a bit more. Then I got my right arm into the sleeve as far as possible and with some wiggling and twitching, I got the shoulder on finally. Now I had to get hold of the string again. There is a low table nearby, I moved along that table and pulled the string onto its plate. There I could grab it again with my mouth and start pulling up. For the second stage, I had to move to my desk, because the table was too low now. There I put the string down, grabbed a shorter part of it and slowly pulled up until the zipper was completely closed. It didn't hit like a bomb, but rather slowly. I was aware, that I had to open the zipper for a considerable width to escape. At the same time, I was very confident, that I could do that, since I had tried a few times. I laid down onto the sofa. The outside of the bag is so smooth that it doesn't have noticeable friction against a sofa, very interesting feeling! I twisted back and forth, turned to the sides, onto the belly and back etc. After a while I remember the zipper and wanted to demonstrate to myself, that I could not reach it like that. I could reach it with my chin and it opened a little bit. With the help of my shoulders and bending down my head as much as possible, I opened it quite a bit more. Then made an effort and grabbed the string, closed the zipper again. A little later I decided to finish this experiment, which - so far - had gone pretty well. So I opened the zipper again the same way -with my chin - and worked it down as much as possible. At some point, it didn't go any further, after all, I had to use the string, because my arms were still trapped. I did manage to grab the string with my right hand - through the outer "fabric" of the bag, and by bending backwards, I could open the zipper further. Re-grab, further and enough, I escaped.

Preliminary Conclusion

I like the sleeping bag! So far, it didn't prove secure, which is fine, since that would make it unsuited for self-bondage. I do not need hooks on the wall or anything else, I only need a string attached to the zipper. Therefore, this bag can be used anywhere, no preparation needed. Even with a gag, it would be possible to escape, however harder to get in. But, that is the most important point, this could actually be used as a sleeping bag, in either way, with arms sleeved or not. I will most probably be able to refine the getting out until I can even do it in the dark.

I can even think of a more secure trapping: For closing, use a removable string. For complete opening, attach a key-ring to the zipper handle and attach a hook somewhere near floor level. I would have to catch the key-ring with the hook, then shimmy along the hook to open the zipper further. And I could use an ice timer to make this hook available.

In short: Nice sleeping bag for restrained times, but I haven't discovered a real "secure mode" yet. The restraining is serious though, it should be quite enjoyable if you don't need the kick of inescapability. Of course, a helper could secure the zipper to your neck and that would make things much harder, not sure, how strong the material is. Recommended toy!

Ok, happy tonight to all of you, I am going to try sleeping in this bag tonight (probably with free arms though).

By the way, I checked the website that is printed onto the pictures - emoticon-x.eu. The got some fetish stuff, latex, leather and pvc, but not this sleeping bag. I also checked for another one with the same seller, but there are no items at all at the moment. I also checked google for "emoticon-x" but to no avail. If I find anything in future, I will let you know.

In the meantime, I am looking forward to your comments and suggestions.

(1) I have to find a solution to the behaviour of zippers, bending over when being pulled down. On garments made from sewable material (i.e. rather not pvc or latex), I could sew in two small metal rods to keep the zipper upright there.]]>
Tonight, I will add to this post whenever something interesting happens - and I am still able to post. The first test is done, I have examined the bag in detail and found nothing disturbing.

.jpg

lacksleepsack.jpg (Size: 28.15 KB / Downloads: 327)
images from ebay offer

Upper left shows a general view, the views on the right side are a bit boring but you get an idea of the shape. The lower left shows the inside sleeves. By the way, the inside is sort of shiny, but not like that. The sleeve outside is shiny, exactly the same material as the outside.

Test 2

I undressed and got into the bag. The food compartment is small but not tight, I can make 1cm "steps". It felt so "glossy" that I checked, it is not. I pulled the zipper up to my hips or so, then put on the shoulder parts. Perfect length when I am standing. From inside, it was slightly harder to pull up the zipper, but not difficult. With a final "zzzp" it reached the top of the collar. I moved around a bit and found, that I'd rather not sit down on the floor or even kneel, because I am not sure, how strong the zipper is, it might pop open. I will have to put that to the test eventually, but right now, I have more important plans. The width is comfortable, only the shoulders could be a bit more narrow. But perhaps the width is necessary for the arms to get into the sleeves later on.

I opened the bag again and, laying on my bed, inserted my left arm into the left sleeve. Zipping up wasn't any more difficult this way. There wasn't much I could do with my left arm now, the sleeve is narrow and the only realistic movement is up and down. I could probably twist my bottom and reach my parts, but didn't try that. This is not a chastity device. I tried to remove the left arm from the sleeve, but I didn't succeed - good! By now, I was somewhat aroused, but opened the zipper and got out.

Test 3

I mounted a screw at the wall, about 70 cm above the floor. Then I put a string to the zipper handle and put the bag on again. It took me a while to get to another wall hook at face height, which was supposed to serve for closing the zipper. I inserted my left arm into the sleeve again, adjusted the shoulder on the left, then inserted the right arm into the other sleeve. It took me a while to get the other shoulder part onto the right shoulder, but I could do it. The string was attached to the hook, but I knew, I wouldn't do it. However, I stood there for a little while and wondered how it would be to simply try.

Ok, I didn't close the zipper, instead removed the right arm from the sleeve, put the right shoulder part in place and then, with both arms flat against my body inside the bag, tried to close the bag by pulling the string (moving back from the hook). I figured, that I either needed a shorter string or a higher hook, or another method for the last 20 cms. I found another method, grabbed the string with my teeth and got the zipper closed. OK, the first part accomplished, I can get in without using my arms or hands, so I should also be able to get in with both arms in the sleeves.

While closing the zipper, I already had noticed that the screw in the wall was too high for puling the zipper down. The string end was even lower than the screw. I looked around and found a bicycle stand with two "hooks" to hold the lower and diagonal pipes of the back-frame of a bike. It turned out, that the upper one was low enough. I had to reshape the noose at the end of the string to get it onto the hook, and fortunately (for later safety), I could do that with my mouth. With a bit of dangling and aiming, I got the noose onto the hook. Then I carefully started pulling. The zipper opened a little bit, then the string was too long again. So I pushed the stand over to get the hook down to the floor. This was low enough, I could open the zipper down to my belly. From my second experiment with both arms in the sleeves, I knew, that this was low enough, and I could have "walked" away to lower the zipper even more.

In theory, I have proven, that both, getting in and out with both arms inside the sleeves should be possible. But just for safety, I will try it a few more times before moving on to the final test. The bicycle stand is a good tool, I won't bother changing the screw. But I will shorten the zipper string a bit.

Test 4

I shortened the string to half its length, but it turned out that that was too short, I could not attach it to the hook on the wall. So I made it longer again and then I noticed that I would not need the wall hook at all. I can pull the string with my teeth, then drop it in a convenient place to grab a shorter length and close the bag. Opening went well so far, but I had to straighten the collar eventually, the zipper bent over instead of opening(1). Good enough for me!

Test 5
Time for the final test, close the bag completely with both arms inside the sleeves. No cheating possible, one arm would stay put even with the help of the second (free) arm, and certainly without help. And so I did. Getting the right shoulder on with the shorter string was a bit difficult, so I let go the string from the grip of my teeth and opened the bag a bit more. Then I got my right arm into the sleeve as far as possible and with some wiggling and twitching, I got the shoulder on finally. Now I had to get hold of the string again. There is a low table nearby, I moved along that table and pulled the string onto its plate. There I could grab it again with my mouth and start pulling up. For the second stage, I had to move to my desk, because the table was too low now. There I put the string down, grabbed a shorter part of it and slowly pulled up until the zipper was completely closed. It didn't hit like a bomb, but rather slowly. I was aware, that I had to open the zipper for a considerable width to escape. At the same time, I was very confident, that I could do that, since I had tried a few times. I laid down onto the sofa. The outside of the bag is so smooth that it doesn't have noticeable friction against a sofa, very interesting feeling! I twisted back and forth, turned to the sides, onto the belly and back etc. After a while I remember the zipper and wanted to demonstrate to myself, that I could not reach it like that. I could reach it with my chin and it opened a little bit. With the help of my shoulders and bending down my head as much as possible, I opened it quite a bit more. Then made an effort and grabbed the string, closed the zipper again. A little later I decided to finish this experiment, which - so far - had gone pretty well. So I opened the zipper again the same way -with my chin - and worked it down as much as possible. At some point, it didn't go any further, after all, I had to use the string, because my arms were still trapped. I did manage to grab the string with my right hand - through the outer "fabric" of the bag, and by bending backwards, I could open the zipper further. Re-grab, further and enough, I escaped.

Preliminary Conclusion

I like the sleeping bag! So far, it didn't prove secure, which is fine, since that would make it unsuited for self-bondage. I do not need hooks on the wall or anything else, I only need a string attached to the zipper. Therefore, this bag can be used anywhere, no preparation needed. Even with a gag, it would be possible to escape, however harder to get in. But, that is the most important point, this could actually be used as a sleeping bag, in either way, with arms sleeved or not. I will most probably be able to refine the getting out until I can even do it in the dark.

I can even think of a more secure trapping: For closing, use a removable string. For complete opening, attach a key-ring to the zipper handle and attach a hook somewhere near floor level. I would have to catch the key-ring with the hook, then shimmy along the hook to open the zipper further. And I could use an ice timer to make this hook available.

In short: Nice sleeping bag for restrained times, but I haven't discovered a real "secure mode" yet. The restraining is serious though, it should be quite enjoyable if you don't need the kick of inescapability. Of course, a helper could secure the zipper to your neck and that would make things much harder, not sure, how strong the material is. Recommended toy!

Ok, happy tonight to all of you, I am going to try sleeping in this bag tonight (probably with free arms though).

By the way, I checked the website that is printed onto the pictures - emoticon-x.eu. The got some fetish stuff, latex, leather and pvc, but not this sleeping bag. I also checked for another one with the same seller, but there are no items at all at the moment. I also checked google for "emoticon-x" but to no avail. If I find anything in future, I will let you know.

In the meantime, I am looking forward to your comments and suggestions.

(1) I have to find a solution to the behaviour of zippers, bending over when being pulled down. On garments made from sewable material (i.e. rather not pvc or latex), I could sew in two small metal rods to keep the zipper upright there.]]> <![CDATA[Some Experiments]]> https://www.likera.com/forum/mybb/Thread-Some-Experiments Sat, 09 Jun 2012 14:13:05 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Some-Experiments <![CDATA[Quick and dirty but safe hog-tie]]> https://www.likera.com/forum/mybb/Thread-Quick-and-dirty-but-safe-hog-tie Wed, 11 Apr 2012 18:58:40 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Quick-and-dirty-but-safe-hog-tie
My major concern when trying a hog-tie in SB has always been to get my hands as close as possible to my feet, being as immobile as possible. Of course, there is the well known "ring device", but, if well applied, it is final and you need some new rope each time.

Well, here is, what I did:

I tied a fairly long rope to one leg of a long sofa. A bed would do too. My sofa is a convertible sofa, which can also be used as a bed. With the free end, I tied my ankles together. I took another rope and tied a ring, that is just wide enough to get both wrists in. Then I moved very close to the side of the sofa where the ankle rope is attached and assumed a side-hog-tie-position as close as possible to the sofa leg. Then I slid one hand through the small rope ring, moved the rope, that connects ankles and sofa leg over the ring and slid the other hand in too.

The situation now was like this: Ankles tied together, the rest of the rope from there leading between my wrists (behind my back), over the wrist tie and then down over one side of the sofa to the nearest sofa leg. I was on one side, knees bent and directly at the side of the sofa.

I then turned onto my belly, assumed the typical hog-tie position and started to move away from the side of the sofa. The rope to my ankles slowly straightened and pulled my hands towards my feet. I had to adjust it a few times, because there was a lot of friction between the ropes. Moving was quite exhausting, since I had to "walk" on shoulders and hips. Eventually, the rope stopped me and I found my hands and feet as close together as possible (pretty much at least) and the wrist tie cinched "securely". This was the tightest hog-tie, I have ever experienced. Although I knew, that I only needed to move back in order to get free, this was quite a sensational feeling and I enjoyed it until the end of it, which came far too soon! By the way, I was completely soaked in sweat and really relaxed after this. And once my body had cooled down, I had a very nice and long shower. That's what I call "Wellness" 😁 .

Ok, this is no secure bondage at all, you can move back as soon as you like. But this bondage can be very strict and tight and therefore great for those, who are more interested in the sensational type of bondage than in real helplessness.

I also thought of some possible improvements.

You could add a crotch rope and lead the rope between ankles and wrists through there. This should make moving even harder and remove some strain from the wrists, which cannot be pulled beyond the crotch rope.

Add a shoulder harness instead of the crotch rope and tie you hands in box-tie style (insert them into the ring from opposite sides). The hands will be pulled up towards the shoulder harness (which should not be too high), instead of down to the feet. The feet will be pulled towards the harness as well, possibly even more, than in the original way. I suppose, there is no further movement possible once your legs start to lift off, but attaining that much is pretty good for SB, isn't it?`I think, this is the method, I will try next.

Nobody asked, but here two drawings of the original method:

.jpg

hogtie_1.jpg (Size: 22.1 KB / Downloads: 638)
This is the position after inserting the other hand into the rope ring, sort of relaxed on the side, a second to get free.

.jpg

hogtie_2.jpg (Size: 20.84 KB / Downloads: 621)
If the ankle rope is not too long, this is, how you will end up after some crawling, a very strict and tight hog-tie. You must crawl back to the other end of the sofa in order to get free.

I suppose, you can dream to look like this:

http://www.flickr.com/photos/kinkyasians/4335846572/

Some more nice photos there, best view is here: http://www.flickriver.com/photos/kinkyas...366616284/

Of course, you could bind your knees together. I am not sure, if you can move enough then, to get into the tight position, but it is worth trying.]]>
My major concern when trying a hog-tie in SB has always been to get my hands as close as possible to my feet, being as immobile as possible. Of course, there is the well known "ring device", but, if well applied, it is final and you need some new rope each time.

Well, here is, what I did:

I tied a fairly long rope to one leg of a long sofa. A bed would do too. My sofa is a convertible sofa, which can also be used as a bed. With the free end, I tied my ankles together. I took another rope and tied a ring, that is just wide enough to get both wrists in. Then I moved very close to the side of the sofa where the ankle rope is attached and assumed a side-hog-tie-position as close as possible to the sofa leg. Then I slid one hand through the small rope ring, moved the rope, that connects ankles and sofa leg over the ring and slid the other hand in too.

The situation now was like this: Ankles tied together, the rest of the rope from there leading between my wrists (behind my back), over the wrist tie and then down over one side of the sofa to the nearest sofa leg. I was on one side, knees bent and directly at the side of the sofa.

I then turned onto my belly, assumed the typical hog-tie position and started to move away from the side of the sofa. The rope to my ankles slowly straightened and pulled my hands towards my feet. I had to adjust it a few times, because there was a lot of friction between the ropes. Moving was quite exhausting, since I had to "walk" on shoulders and hips. Eventually, the rope stopped me and I found my hands and feet as close together as possible (pretty much at least) and the wrist tie cinched "securely". This was the tightest hog-tie, I have ever experienced. Although I knew, that I only needed to move back in order to get free, this was quite a sensational feeling and I enjoyed it until the end of it, which came far too soon! By the way, I was completely soaked in sweat and really relaxed after this. And once my body had cooled down, I had a very nice and long shower. That's what I call "Wellness" 😁 .

Ok, this is no secure bondage at all, you can move back as soon as you like. But this bondage can be very strict and tight and therefore great for those, who are more interested in the sensational type of bondage than in real helplessness.

I also thought of some possible improvements.

You could add a crotch rope and lead the rope between ankles and wrists through there. This should make moving even harder and remove some strain from the wrists, which cannot be pulled beyond the crotch rope.

Add a shoulder harness instead of the crotch rope and tie you hands in box-tie style (insert them into the ring from opposite sides). The hands will be pulled up towards the shoulder harness (which should not be too high), instead of down to the feet. The feet will be pulled towards the harness as well, possibly even more, than in the original way. I suppose, there is no further movement possible once your legs start to lift off, but attaining that much is pretty good for SB, isn't it?`I think, this is the method, I will try next.

Nobody asked, but here two drawings of the original method:

.jpg

hogtie_1.jpg (Size: 22.1 KB / Downloads: 638)
This is the position after inserting the other hand into the rope ring, sort of relaxed on the side, a second to get free.

.jpg

Of course, you could bind your knees together. I am not sure, if you can move enough then, to get into the tight position, but it is worth trying.]]> <![CDATA[Bolero Single Glove self-bondage. Time-release]]> https://www.likera.com/forum/mybb/Thread-Bolero-Single-Glove-self-bondage-Time-release Tue, 10 Apr 2012 17:29:09 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Bolero-Single-Glove-self-bondage-Time-release http://www.likera.com/forum/mybb/Thread-...lf-bondage . In the meantime, I can put it on without special tricks, I only need a string on the zipper or a large key-ring. Unfortunately, I haven't found a timed release method yet, and the bolero is not as exciting as it used to be. So I often wear it for a while, then take it off again, sometimes even with a bit of frustration.

I would like to be locked in it for a couple of hours, perhaps overnight, but my best idea for having this is still another person, which I don't have. So I am collecting ideas now, and will list them here.

One of my favorites is pretty destructive:
First, I have to find a string thin enough to go through the small hole in the slider of the zipper. I would tie this string in a large ring, feed it through the hole half way and the attach both sides to a hook. The string would go through the collar as well, to make sure, it is one-way only; the collar would not allow me to pull it down again. The detach the side without the knot, move away from the hook and the string would be detached. There is no way to open the zipper from the inside now, stuck!

After a while, I would need to force my way out somehow. Perhaps, I am strong enough to break it open by pulling my shoulders forward, which puts a lot of strain onto the zipper and its seams. Once I tried hard, but perhaps not as hard as I could, since I did not need to get out that way. Alternatively, I would have to use some tool to push a hole into the fabric. From there, I suppose, it will be fairly easy to enlarge the hole and break free. Anyway, the bolero will be destroyed, probably beyond repair. And this would make me wait a while. When I come during SB, I usually remove all restraints right away. At this point, I would probably try brute force without tools. And if I am lucky, I would fail and perhaps enjoy another while. The hard limit would be much discomfort, time or a strong urge to pee - and perhaps only then, I would use a tool.

"the worst idea ever": Put it on as above, but add straps around arms and torso (I would not put them just around the arms, as that would be too tough). There are these straps that can be tightened by pulling the open end, and opened by pushing something on the buckle. No way to open this while in the bolero. Release: Ask someone else, I doubt, that I could break free, even if I destroy part of the bolero. I have no trusted person, hence the title of this idea 😉 .

Ice timer on a Hogtie:
I need to stand at least partially in order to use any "normal" release method. Once hogtied, I am stuck. Perhaps, I could do a hogtie with a special strap, that I can tighten, but not loosen. I can imagine a couple of "ice links" to attach this strap to the leg ties. But the legs need to connect to a harness, because I already ripped off the d-ring of the bolero (hog-tie with snap hook and I lost patience after coming, it is hard to operate a snap hook through the material of the bolero). Of course, the bolero could and should be connected to the harness as well.

Ice timer on a fixed point:
I could tie myself to a spot, where no release is available (I need a hook on the wall or similar). Timed with ice of course. I am not sure, how to attach this. I need the hook in order to close the bolero as well, so that must be solved.

Of course, there are various possible additions to the bolero, gag, plug or a blindfold. Actually, a blindfold could be quite interesting, because it would make release pretty hard but not impossible.

Well, I am focussed on the bolero itself though. If you know it and have more ideas, please let me know.]]> http://www.likera.com/forum/mybb/Thread-...lf-bondage . In the meantime, I can put it on without special tricks, I only need a string on the zipper or a large key-ring. Unfortunately, I haven't found a timed release method yet, and the bolero is not as exciting as it used to be. So I often wear it for a while, then take it off again, sometimes even with a bit of frustration.

I would like to be locked in it for a couple of hours, perhaps overnight, but my best idea for having this is still another person, which I don't have. So I am collecting ideas now, and will list them here.

One of my favorites is pretty destructive:
First, I have to find a string thin enough to go through the small hole in the slider of the zipper. I would tie this string in a large ring, feed it through the hole half way and the attach both sides to a hook. The string would go through the collar as well, to make sure, it is one-way only; the collar would not allow me to pull it down again. The detach the side without the knot, move away from the hook and the string would be detached. There is no way to open the zipper from the inside now, stuck!

After a while, I would need to force my way out somehow. Perhaps, I am strong enough to break it open by pulling my shoulders forward, which puts a lot of strain onto the zipper and its seams. Once I tried hard, but perhaps not as hard as I could, since I did not need to get out that way. Alternatively, I would have to use some tool to push a hole into the fabric. From there, I suppose, it will be fairly easy to enlarge the hole and break free. Anyway, the bolero will be destroyed, probably beyond repair. And this would make me wait a while. When I come during SB, I usually remove all restraints right away. At this point, I would probably try brute force without tools. And if I am lucky, I would fail and perhaps enjoy another while. The hard limit would be much discomfort, time or a strong urge to pee - and perhaps only then, I would use a tool.

"the worst idea ever": Put it on as above, but add straps around arms and torso (I would not put them just around the arms, as that would be too tough). There are these straps that can be tightened by pulling the open end, and opened by pushing something on the buckle. No way to open this while in the bolero. Release: Ask someone else, I doubt, that I could break free, even if I destroy part of the bolero. I have no trusted person, hence the title of this idea 😉 .

Ice timer on a Hogtie:
I need to stand at least partially in order to use any "normal" release method. Once hogtied, I am stuck. Perhaps, I could do a hogtie with a special strap, that I can tighten, but not loosen. I can imagine a couple of "ice links" to attach this strap to the leg ties. But the legs need to connect to a harness, because I already ripped off the d-ring of the bolero (hog-tie with snap hook and I lost patience after coming, it is hard to operate a snap hook through the material of the bolero). Of course, the bolero could and should be connected to the harness as well.

Ice timer on a fixed point:
I could tie myself to a spot, where no release is available (I need a hook on the wall or similar). Timed with ice of course. I am not sure, how to attach this. I need the hook in order to close the bolero as well, so that must be solved.

Of course, there are various possible additions to the bolero, gag, plug or a blindfold. Actually, a blindfold could be quite interesting, because it would make release pretty hard but not impossible.

Well, I am focussed on the bolero itself though. If you know it and have more ideas, please let me know.]]> <![CDATA[Bolero Armbinder]]> https://www.likera.com/forum/mybb/Thread-Bolero-Armbinder Fri, 18 Nov 2011 20:10:19 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Bolero-Armbinder
Den Armbinder gibt es z.B. hier: http://www.latexguenstig.de/epages/61207...ucts/SM258

Eigentlich wollte ich die ursprüngliche Übersetzung hier einfügen, aber die ist lang, kopliziert und überhaupt, ich schreibe es einfach neu:

Das Material ist PU, lederähnlich aber härter und nicht atmungsaktiv. Der Schlitten des Reißverschlusses ist gleich beim ersten Versuch abgegangen und kurze Zeit später gebrochen, den habe ich durch einen solideren ersetzt. Dazu muß man lediglich das untere Ende des Reißverschlusses öffnen, den alten Schlitten abnehmen (falls nicht sowieso schon ab), den neuen auffädeln und das ganze mit einigen Nähstichen sichern, fertig. Bei der Auswahl des Schlittens muß man die Breite und Dicke des Reißverschlusses kennen, außerdem muß man angeben, daß es sich um einen Spiralreißverschluß handelt - oder man nimmt einfach den Reißverschluß mit und ergötzt sich an den befremdeten Blicken (das empfehle ich ausdrücklich nicht! Wir wollen ja auch nicht, daß sich andere über uns lustig machen.). Ich hatte einen passenden Schlitten an einer alten Jacke gefunden.

Weitere Vorbereitungen:

Man kann die Sicherung am unteren Ende des Reißverschlusses entfernen (war bei meinem nur vernäht). Dieses Ende ist mit den Händen erreichbar und man kann es relativ einfach aufbekommen und der Reißverschluß öffnet sich dann fast von selbst bis nach oben zum Schlitten. Dieses obere Ende öffnet man entweder mit einem beherzten Ruck, wobei der Schlitten aus einer Seite gerissen wird, was der Reißverschluß glücklicherweise ganz gut aushält, oder man versucht, den Schlitten soweit nach unten zu ziehen, daß man den Kopf frei bekommt. Das ist nicht genial, sollte auch nur ein Notausgang sein.

Der Halsriemen ist sehr sinnvoll, da er den Reißverschluß so stabilisiert, daß man ihn leicht wieder aufziehen kann. Aber man sollte vorher testen, wie eng er sein sollte. Lieber etwas zu weit, als zu eng. Wenn man den Armsack herunterzieht, sollte die Last wirklich auf den Schultern sein und nicht am Hals.

Am Schlitten des Reißverschlusses muß man eine Schnur befestigen, mit der man ihn betätigen kann. Die Schnur sollte ungefähr so lang sein, wie der Bolero. Am freien Ende bindet man eine feste Öse, zum Anhängen an einen Türgriff oder ähnliches.

Den Reißverschluß selbst kann man mit etwas Graphit "schmieren", damit er keine Zicken macht. Zum beispiel einfach mit einem Bleistift langsam über die Zähne fahren und den Reißverschluß ein paar Mal betätigen.

Jetzt braucht man noch eine Anziehhilfe: Die besteht einfach aus einer Wäscheklammer, an der eine Schnur befestigt ist. Am freien Ende der Schnur bindet man eine feste Öse.

Am besten trägt man den Bolero mit freiem Oberkörper, damit sich der Zipper nicht verfangen kann. Auf jeden Fall rate ich von T-Shirts oder anderen weiten Tops ab. Mit enganliegenden Bodies mit großem Halsausschnitt (vor allem hinten) hatte ich bislang keinerlei Probleme.

Als erstes streift man den Bolero über den Kopf und steckt einen Arm hinten in den Sack. Dann schließt man den Halsriemen (eher locker als eng). Als nächstes (oder schon vorher) befestigt man ungefähr auf Ellenbogen- bis Schulterhöhe und auf der Seite des noch freien Arms die Wäscheklammer direkt am Reißverschluß. Die Öse der Schnur an der Klammer hängt man über einen Haken, Türgriff o.Ä. Die Öse der Schnur am Reißverschluß führt man am besten über die Schulter und nimmt sie in den Mund. Dann steckt man den zweiten Arm in den Sack, dabei aufpassen, daß die Schnur vom Reißverschluß frei bleibt, und zieht das Schulterteil vorsichtig über die freie Schulter dieses Arms - dafür hat man die Wäscheklammer-Anziehhilfe. Wenn alles gut sitzt, entfernt man sich einfach weiter von dem Haken, an dem die Wäscheklammer hängt und zieht sie so ab. Als letztes hängt man die Öse der Schnur am Reißverschluß über einen Haken und beginnt dann vorsichtig, den Reißverschluß zu schließen. Die Schnur führt man dazu am besten über eine Schulter. Das letzte Stückchen geht am besten, wenn man die Schnur jetzt über den Kopf nach vorne führt. Es macht dann einmal kurz "zipp", wenn der Schlitten über den Kragen gleitet, und man ist fertig eingekleidet. Wenn die Schnur jetzt abgeht, hat man ein Problem 😉

Zurm Befreiung befestigt man die Schnur einfach wieder an einem Haken und zieht den Reißverschluß auf. Die Schnur hängt ja theoretisch hinten am Rücken runter. Wenn man sich auf den Rücken legt und langsam umdreht, hat man ein Ende vor sich, das man in den Mund nehmen kann.

Sollte der Reißverschluß sich nicht öffnen, ist vermutlich das obere Ende des Kragens umgeklappt, das ist mir schon passiert. Dann muß man den Kopf nach vorne und unten recken, um den Kragen nach vorne zu ziehen. Außerdem kann man mit den Händen den Armsack etwas nach unten ziehen. Dann hat es bei mir bislang immer funktioniert.

Ich habe den Armbinder jetzt seit Ende 2009, und seit ich den Reißverschluß verbessert habe, keine ernsthaften Probleme damit. Der Bolero ist recht gut verarbeitet, was bei dem Preis erstaunlich ist. Und er hat auch einigen (allerdings etwas halbherzigen) Ausbruchsversuchen standgehalten. Im Notfall hat man natürlich mehr Kraft, vielleicht hält er das nicht aus - vielleicht aber doch, also Vorsicht!

Bilder befinden sich im Originalbeitrag, also hier: http://www.likera.com/forum/mybb/Thread-...lf-bondage]]>
Den Armbinder gibt es z.B. hier: http://www.latexguenstig.de/epages/61207...ucts/SM258

Eigentlich wollte ich die ursprüngliche Übersetzung hier einfügen, aber die ist lang, kopliziert und überhaupt, ich schreibe es einfach neu:

Das Material ist PU, lederähnlich aber härter und nicht atmungsaktiv. Der Schlitten des Reißverschlusses ist gleich beim ersten Versuch abgegangen und kurze Zeit später gebrochen, den habe ich durch einen solideren ersetzt. Dazu muß man lediglich das untere Ende des Reißverschlusses öffnen, den alten Schlitten abnehmen (falls nicht sowieso schon ab), den neuen auffädeln und das ganze mit einigen Nähstichen sichern, fertig. Bei der Auswahl des Schlittens muß man die Breite und Dicke des Reißverschlusses kennen, außerdem muß man angeben, daß es sich um einen Spiralreißverschluß handelt - oder man nimmt einfach den Reißverschluß mit und ergötzt sich an den befremdeten Blicken (das empfehle ich ausdrücklich nicht! Wir wollen ja auch nicht, daß sich andere über uns lustig machen.). Ich hatte einen passenden Schlitten an einer alten Jacke gefunden.

Weitere Vorbereitungen:

Man kann die Sicherung am unteren Ende des Reißverschlusses entfernen (war bei meinem nur vernäht). Dieses Ende ist mit den Händen erreichbar und man kann es relativ einfach aufbekommen und der Reißverschluß öffnet sich dann fast von selbst bis nach oben zum Schlitten. Dieses obere Ende öffnet man entweder mit einem beherzten Ruck, wobei der Schlitten aus einer Seite gerissen wird, was der Reißverschluß glücklicherweise ganz gut aushält, oder man versucht, den Schlitten soweit nach unten zu ziehen, daß man den Kopf frei bekommt. Das ist nicht genial, sollte auch nur ein Notausgang sein.

Der Halsriemen ist sehr sinnvoll, da er den Reißverschluß so stabilisiert, daß man ihn leicht wieder aufziehen kann. Aber man sollte vorher testen, wie eng er sein sollte. Lieber etwas zu weit, als zu eng. Wenn man den Armsack herunterzieht, sollte die Last wirklich auf den Schultern sein und nicht am Hals.

Am Schlitten des Reißverschlusses muß man eine Schnur befestigen, mit der man ihn betätigen kann. Die Schnur sollte ungefähr so lang sein, wie der Bolero. Am freien Ende bindet man eine feste Öse, zum Anhängen an einen Türgriff oder ähnliches.

Den Reißverschluß selbst kann man mit etwas Graphit "schmieren", damit er keine Zicken macht. Zum beispiel einfach mit einem Bleistift langsam über die Zähne fahren und den Reißverschluß ein paar Mal betätigen.

Jetzt braucht man noch eine Anziehhilfe: Die besteht einfach aus einer Wäscheklammer, an der eine Schnur befestigt ist. Am freien Ende der Schnur bindet man eine feste Öse.

Am besten trägt man den Bolero mit freiem Oberkörper, damit sich der Zipper nicht verfangen kann. Auf jeden Fall rate ich von T-Shirts oder anderen weiten Tops ab. Mit enganliegenden Bodies mit großem Halsausschnitt (vor allem hinten) hatte ich bislang keinerlei Probleme.

Als erstes streift man den Bolero über den Kopf und steckt einen Arm hinten in den Sack. Dann schließt man den Halsriemen (eher locker als eng). Als nächstes (oder schon vorher) befestigt man ungefähr auf Ellenbogen- bis Schulterhöhe und auf der Seite des noch freien Arms die Wäscheklammer direkt am Reißverschluß. Die Öse der Schnur an der Klammer hängt man über einen Haken, Türgriff o.Ä. Die Öse der Schnur am Reißverschluß führt man am besten über die Schulter und nimmt sie in den Mund. Dann steckt man den zweiten Arm in den Sack, dabei aufpassen, daß die Schnur vom Reißverschluß frei bleibt, und zieht das Schulterteil vorsichtig über die freie Schulter dieses Arms - dafür hat man die Wäscheklammer-Anziehhilfe. Wenn alles gut sitzt, entfernt man sich einfach weiter von dem Haken, an dem die Wäscheklammer hängt und zieht sie so ab. Als letztes hängt man die Öse der Schnur am Reißverschluß über einen Haken und beginnt dann vorsichtig, den Reißverschluß zu schließen. Die Schnur führt man dazu am besten über eine Schulter. Das letzte Stückchen geht am besten, wenn man die Schnur jetzt über den Kopf nach vorne führt. Es macht dann einmal kurz "zipp", wenn der Schlitten über den Kragen gleitet, und man ist fertig eingekleidet. Wenn die Schnur jetzt abgeht, hat man ein Problem 😉

Zurm Befreiung befestigt man die Schnur einfach wieder an einem Haken und zieht den Reißverschluß auf. Die Schnur hängt ja theoretisch hinten am Rücken runter. Wenn man sich auf den Rücken legt und langsam umdreht, hat man ein Ende vor sich, das man in den Mund nehmen kann.

Sollte der Reißverschluß sich nicht öffnen, ist vermutlich das obere Ende des Kragens umgeklappt, das ist mir schon passiert. Dann muß man den Kopf nach vorne und unten recken, um den Kragen nach vorne zu ziehen. Außerdem kann man mit den Händen den Armsack etwas nach unten ziehen. Dann hat es bei mir bislang immer funktioniert.

Ich habe den Armbinder jetzt seit Ende 2009, und seit ich den Reißverschluß verbessert habe, keine ernsthaften Probleme damit. Der Bolero ist recht gut verarbeitet, was bei dem Preis erstaunlich ist. Und er hat auch einigen (allerdings etwas halbherzigen) Ausbruchsversuchen standgehalten. Im Notfall hat man natürlich mehr Kraft, vielleicht hält er das nicht aus - vielleicht aber doch, also Vorsicht!

Bilder befinden sich im Originalbeitrag, also hier: http://www.likera.com/forum/mybb/Thread-...lf-bondage]]> <![CDATA[Single Glove Leotard]]> https://www.likera.com/forum/mybb/Thread-Single-Glove-Leotard Mon, 15 Aug 2011 19:44:37 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Single-Glove-Leotard http://www.likera.com/blog/wp/archives/10702

I hope, there won't be too many new items like this in the blog, because I am really fond of this type of bondage and I ordered one, which arrived today. It looks nice, the material is some sort PU, very soft on the outside, rough but still soft on the inside, coming pretty close to real leather, except for the smell of course. The crotch is clearly designed for women, I will need to wear something underneath. The zipper looks strong and moves well, good!

My first quick attempt to put it on, was not successful. It is very difficult, to get the shoulder parts on, and so I attached strings to the rings on the collar. It helped a little bit, but then one of the rings went off. Then I had to leave for a while and now I am back. What follows is sort of a live report, meaning, that I am saving now, then try something, edit the post and save, and so on. So come back for more until you read my final conclusion.

By the way, there was no real communication with the seller, I told him some measurements and asked him to make the suit accordingly. I indicated arm length, torso length (both from top of the shoulder) and waist size. I think, I should have included the info that I am a man and I should have mentioned my shoulder width, but it looks like the shoulder part will fit. Despatch was two days after my payment (paypal, instant) and I got it after another two days, so that was fine.

22:35

Ok, this thing is a bit tight on the shoulders, but the main problem is to shift it up properly. The collar sits on my lower neck, impossible to close the zipper this way. I am going to punch a ring into the back of the collar, then attach a string to pull it up. So far, I could pull the zipper up 3/4 of the length. I might be able to get it higher, but instead, the zipper might break, so I won't try, until I got this glove into the right position. But the shoulders were covered and I had to wiggle a bit in order to get out again.

It might be helpful to wear a lycra top underneath, to reduce the friction. This was a little bit exhausting, but I am sure, I will give it another try later tonight.

23:32

Puh, sweating! I got the zipper closed until right below the collar. The collar is bent out and I could do nothing about it, although it is definitely wide enough. The method: I attached a string to both sides of the collar, one side to the ring, the other side to the hole, that exists since the other ring went off. I then attached this string to a hook on the wall, later on, I managed to grip it with my teeth, and that helped a lot. Between that pulling, I used my teeth to pull the string with the zipper up slowly, sometimes tooth by tooth. Finally, I managed to pull this zipper string through the collar string, to make sure, that the collar string would not get into the zipper, then pulled the zipper string over the handle of a drawer, bent down and pulled the string further by foot. All the time, I had to pull tight the crotch part of the leotard, it is waayyyyyyyy tooooooo looooong! It was fairly easy through the material of the arm bag.

Not sure, if the following image will help:

.jpg

leobag.jpg (Size: 144.77 KB / Downloads: 463)

03:08 (obviously the night)

A lycra leotard with long sleeves definitely makes things easier. The suit goes on like that, except for the collar, which still is flat to the sides. I think, the suit needs to be lifted on the back, but I leave that for tomorrow (ring on the collar backside, string etc.). For some reason, the "real feeling" isn't there yet, I suppose, it is triggered by the zipper going up completely. Apart from that, I am looking for ways to remove all strings after donning the suit successfully - and get the zipper string on again, once I want to get free.

Enough for this night, more later.

PS: This is definitely not "made to measurements", it is way too long. Well, better too long than too short though. I will ask the guy, if he can do better, including slightly wider shoulders - but that is for much later, my budget is exhausted for the moment.]]> http://www.likera.com/blog/wp/archives/10702

I hope, there won't be too many new items like this in the blog, because I am really fond of this type of bondage and I ordered one, which arrived today. It looks nice, the material is some sort PU, very soft on the outside, rough but still soft on the inside, coming pretty close to real leather, except for the smell of course. The crotch is clearly designed for women, I will need to wear something underneath. The zipper looks strong and moves well, good!

My first quick attempt to put it on, was not successful. It is very difficult, to get the shoulder parts on, and so I attached strings to the rings on the collar. It helped a little bit, but then one of the rings went off. Then I had to leave for a while and now I am back. What follows is sort of a live report, meaning, that I am saving now, then try something, edit the post and save, and so on. So come back for more until you read my final conclusion.

By the way, there was no real communication with the seller, I told him some measurements and asked him to make the suit accordingly. I indicated arm length, torso length (both from top of the shoulder) and waist size. I think, I should have included the info that I am a man and I should have mentioned my shoulder width, but it looks like the shoulder part will fit. Despatch was two days after my payment (paypal, instant) and I got it after another two days, so that was fine.

22:35

Ok, this thing is a bit tight on the shoulders, but the main problem is to shift it up properly. The collar sits on my lower neck, impossible to close the zipper this way. I am going to punch a ring into the back of the collar, then attach a string to pull it up. So far, I could pull the zipper up 3/4 of the length. I might be able to get it higher, but instead, the zipper might break, so I won't try, until I got this glove into the right position. But the shoulders were covered and I had to wiggle a bit in order to get out again.

It might be helpful to wear a lycra top underneath, to reduce the friction. This was a little bit exhausting, but I am sure, I will give it another try later tonight.

23:32

Puh, sweating! I got the zipper closed until right below the collar. The collar is bent out and I could do nothing about it, although it is definitely wide enough. The method: I attached a string to both sides of the collar, one side to the ring, the other side to the hole, that exists since the other ring went off. I then attached this string to a hook on the wall, later on, I managed to grip it with my teeth, and that helped a lot. Between that pulling, I used my teeth to pull the string with the zipper up slowly, sometimes tooth by tooth. Finally, I managed to pull this zipper string through the collar string, to make sure, that the collar string would not get into the zipper, then pulled the zipper string over the handle of a drawer, bent down and pulled the string further by foot. All the time, I had to pull tight the crotch part of the leotard, it is waayyyyyyyy tooooooo looooong! It was fairly easy through the material of the arm bag.

Not sure, if the following image will help:

.jpg

leobag.jpg (Size: 144.77 KB / Downloads: 463)

03:08 (obviously the night)

A lycra leotard with long sleeves definitely makes things easier. The suit goes on like that, except for the collar, which still is flat to the sides. I think, the suit needs to be lifted on the back, but I leave that for tomorrow (ring on the collar backside, string etc.). For some reason, the "real feeling" isn't there yet, I suppose, it is triggered by the zipper going up completely. Apart from that, I am looking for ways to remove all strings after donning the suit successfully - and get the zipper string on again, once I want to get free.

Enough for this night, more later.

PS: This is definitely not "made to measurements", it is way too long. Well, better too long than too short though. I will ask the guy, if he can do better, including slightly wider shoulders - but that is for much later, my budget is exhausted for the moment.]]> <![CDATA[PVC Sleeping Bag]]> https://www.likera.com/forum/mybb/Thread-PVC-Sleeping-Bag Thu, 23 Jun 2011 17:34:01 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-PVC-Sleeping-Bag
It is a simple bag, about 60 cm wide, 185 cm long (a bit more perhaps), with a front zipper that goes all the way from the neck to the bottom end. The hood has an elastic band at the neck, which is snug, but not uncomfortable, the head is completely separated from the rest of the body. In order to get it, I had to slip the head into the hood first, then - blindfolded - get my feet and the rest of the body into the bag, find the zipper and close it. It is a double zipper, which can be closed either from the top or from the bottom. It has no handles inside, so I had to push it up with my fingernail for the last few centimeters.

When I was completely enclosed, I noticed, that the hood was fairly big and although - being used to that - I was breathing through my nose, it didn't make breathing hard. But of course, I was mostly rebreathing my own breath. So I switched to mouth breathing and instantly noticed, that a larger tube would be more comfortable. The existing one is okay, but I somtimes breathe much harder when playing such games. I would also like a smaller hood and a different type of pvc. Secondly, the breathing tube is pretty long and unless I take it in completely (which is not kinky, it is just a tube), the pvc won't touch my face. But I want to fit a ball around it and then cut it to size. Perhaps not a ball, but the mouth piece of a snorkel - that's not yet decided.

Despite of these small problems, it was arousing and I came quickly. Then I discovered another problem: The pvc is completely opaque and it was difficult to open the zipper from inside. I wasn't sure if it was stuck or simply hard to push. For a short moment, I was ready to panick, but then decided not to and slowly worked the zipper down. But the good side of this: When I found, that I could open the zipper, I started to feel quite comfortable in my coocoon, except, that I didn't have time for more.

After all, I am glad, that I bought this bag. It is not perfect, but I suppose, there is no perfect bag like this. And it is not a complete failure, but probably not going to be my favorite fetish toy. I often dreamt of having a bag like this and now I can start dreaming of other things again 😁

If I eventually happen to have enough money, I might buy another one, with some modifications, such as smoother and slightly see-through material, smaller hood, perhaps a bit more shaped according to my body and with a connection for an air pump.

The bag looks like the one on the following image, except, that it doesn't have the elastic in the middle, it does have a zipper and the lower end is closed; apparently a return item from a customer who wanted some modifications. And, of course, mine is shiny red opaque.

.jpg

BB1_4.jpg (Size: 64.07 KB / Downloads: 454) ]]>
It is a simple bag, about 60 cm wide, 185 cm long (a bit more perhaps), with a front zipper that goes all the way from the neck to the bottom end. The hood has an elastic band at the neck, which is snug, but not uncomfortable, the head is completely separated from the rest of the body. In order to get it, I had to slip the head into the hood first, then - blindfolded - get my feet and the rest of the body into the bag, find the zipper and close it. It is a double zipper, which can be closed either from the top or from the bottom. It has no handles inside, so I had to push it up with my fingernail for the last few centimeters.

When I was completely enclosed, I noticed, that the hood was fairly big and although - being used to that - I was breathing through my nose, it didn't make breathing hard. But of course, I was mostly rebreathing my own breath. So I switched to mouth breathing and instantly noticed, that a larger tube would be more comfortable. The existing one is okay, but I somtimes breathe much harder when playing such games. I would also like a smaller hood and a different type of pvc. Secondly, the breathing tube is pretty long and unless I take it in completely (which is not kinky, it is just a tube), the pvc won't touch my face. But I want to fit a ball around it and then cut it to size. Perhaps not a ball, but the mouth piece of a snorkel - that's not yet decided.

Despite of these small problems, it was arousing and I came quickly. Then I discovered another problem: The pvc is completely opaque and it was difficult to open the zipper from inside. I wasn't sure if it was stuck or simply hard to push. For a short moment, I was ready to panick, but then decided not to and slowly worked the zipper down. But the good side of this: When I found, that I could open the zipper, I started to feel quite comfortable in my coocoon, except, that I didn't have time for more.

After all, I am glad, that I bought this bag. It is not perfect, but I suppose, there is no perfect bag like this. And it is not a complete failure, but probably not going to be my favorite fetish toy. I often dreamt of having a bag like this and now I can start dreaming of other things again 😁

If I eventually happen to have enough money, I might buy another one, with some modifications, such as smoother and slightly see-through material, smaller hood, perhaps a bit more shaped according to my body and with a connection for an air pump.

The bag looks like the one on the following image, except, that it doesn't have the elastic in the middle, it does have a zipper and the lower end is closed; apparently a return item from a customer who wanted some modifications. And, of course, mine is shiny red opaque.

.jpg

BB1_4.jpg (Size: 64.07 KB / Downloads: 454) ]]> <![CDATA[Bolero Armbinder - another release method]]> https://www.likera.com/forum/mybb/Thread-Bolero-Armbinder-another-release-method Sun, 24 Oct 2010 20:01:50 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Bolero-Armbinder-another-release-method
My idea consists of a wire clothes hanger which I have to get into a suitable shape. This clothes hanger will have the normal hook on one side and another hook on the other side to "grab" the key-ring on the zipper. I am trying this with the string on, just in case. This is a live report, I will post now, edit after the test etc.

---

First test: I pulled the clothes hanger long and formed a hook on the other side. On the floor it is useless, can#t get it close to my neck and the zipper ring. On a table, I can push it around but not hook it in. And I have no control over the direction, this needs a mirror, perhaps even two mirrors. I will continue with a collar instead of the bolero for now.

---

This is harder than I thought. I realised that the hook needs to be fixed somewhere in order to get it into the ring. On the other hand, it can stay there once fixed, I can move the zipper down by standing up carefully. Must try this with bolero next.

---

It works! Getting the hook onto the bolero is a bit harder, the arms are in the way. But I got it on and managed to open the zipper without using the string. But it doesn't feel right. If I topple or get up too fast, I might destroy the hook, pull off the ring or whatever. Not safe! This is a good start but it needs improvement.

---

I am glad, I did more tests. On the second try, the hook slipped off when the zipper was half open. I wasn't able to get it into the ring again. Without the string, which is still attached, I would be stuck now. Perhaps I could have broken out by force, but I don't want to damage zipper or even the bolero. I will try another hook shape next.

---

Now I am using the "normal" hook of the clothes hanger and I bent the last bit up against the wire - I better upload a drawing:

.gif

bolerohook.gif (Size: 21.46 KB / Downloads: 647)

Once the zipper is getting lower, the ring can slide down and it will be caught by the extra bend in the hook. I tried, it works well. But the setup is not stable, the chair can fall, I have to find a better stand for the hook. In the end, I would like to find a stand, where I can put the hook while bound - after it dropped down from the ice lock. But first things first, I need to find a more stable stand, perhaps a bit higher even. I have a drawer a bit below chest height, this might be good. And I have a vague idea about fixing the hook there too. This is definitely a bad project for Sunday night, this is the last step for today.

---

Two things make it difficult: There is no mirror near the drawer, I can't see, what I am doing. And the position is too low when I am standing, too high when sitting on a chair. This can be fixed, but not tonight.

to be continued...]]> <![CDATA[Karada self bondage improvisation]]> https://www.likera.com/forum/mybb/Thread-Karada-self-bondage-improvisation Tue, 14 Sep 2010 22:13:19 +0000 Strappado]]> https://www.likera.com/forum/mybb/Thread-Karada-self-bondage-improvisation
I put on a simple lycra leotard with long sleeves - long sleeves are good for arm ties, they protect the skin which is very sensible on my upper arms. Underneath I had plain simple underpants, just a precaution to contain a good part of the sperm later on - if necessary. Uncool? Well, not to me. The underpants are invisible and this leotard is my absolute favorite. I also like nudity, but not with optional sperm on my carpet, so a minimum of clothing is required. For your convenience and imagination, add anything you like, except for additional bondage and ballgags, because they would interfere with the scenario, well, keep your mouth and eyes free and be able to walk.

Then I folded a 20m rope in to and put a few knots on the middle section, which was the one end now. Then put that over my head, the knots going down from my chest to a little above my crotch. I put the two lose ends between my legs, then through the rope behind my neck. Then I build a simple karada, but with one extra turn around my upper arms with each "stitch". I wasn't able to tighten the rope around my arms properly but they were way less mobile than without rope.
Then I finished the Karada, making sure that the rope wasn't in the way of anything important and lead the ends to my back again, through my legs. Then I improvised a leg tie above my knees and finally lead the ends of the rope to my back for the hands. Now I looked for the lowest pair of strands going around my back and pulled a loop of the remaining rope through that, doubled it and made it just large enough to comfortably slip both hands through. Then I pulled this loop as tight as possible, using a door handle for help. I still had about one meter of rope left and separated the ends and wrapped them around my wrists a couple of times. Then I tied a simple overhand knot and pulled as tight as possible. Over that, I carefully prepared a second overhand knot, made sure that the first one was still tight, then yanked the second one close as sharp as I could. In fact, I waited a bit before I did that, and remembered where I had my knife - just in case.

Then I started moving around. The leg tie did its work, I could barely walk. Wrists and arms were well secured and it felt right! I was quite aroused already. I checked in a mirror and found that I didn't like the view and so moved on and sat down on my sofa, where I realised a lot of stress on my upper legs and my wrists, it was better to lay down.

Well, as said, the bondage around the arms wasn't perfect and the leg bondage was uncomfortable now, the rope is too thin for just a few wraps. It took me a while to undo the knot on my wrists, then I readjusted things a bit. I sat on my heels, tried again to tighten the rope around my upper arms and then tied the folded legs together, I think this is called "frog tie". Then I tied my hands behind the back again and enjoyed this new position, trying to walk on my knees, rolling over the floor and stuff.

After a little while, I noticed a short hooded down jacket on the sofa (I really like hoods and soft down jackets, combined even better). And then I spent some time trying to put on the hood over my head and the rest of the jacket dangling over my body. I wanted this material as close as possible to me.

At the moment, I am into long term arousal, and so I resisted my urge to come quickly. It was pretty strong, but I didn't want to spoil the leotard yet. Picking up a jacket and putting the hood over your head is quite a task without arms and hands. They were really useless here, and that added to the experience too. When I do SB in my bed, I often miss this evidence of helplessness.

Okay, later on, I decided to free myself, as I had a couple of things to do which I couldn't in this position. I undid my hands after some struggle, freed the legs and undid the upper arm ropes. Then I wrapped the remaining ropes around my body and put on the down jacket. Then I did the stuff I had to do.

Later, I returned and found that I was quite keen to finish this session. So I took off the jacket, recovered the lose rope from my body and made a simple cross hands tie behind my back. I don't remember details from there on, it doesn't matter anyway. It was no extatic moment but a nice and fulfilling finish. After that, I found it quite a challenge to undo the wrist knot and I also found, that I was still in the mood to carry on. Very often, I get stone cold after coming, get all the fetish stuff out of the way quickly and clean up the scene, not this time. But I had taken the decision earlier and I really longed for some lunch (it was 16:00 in the afternoon and I had had breakfast around 9). Well, it is always good to stop at the best moment 😊

I am not sure how much time I spent in bondage during this session. It feels quite long when I look back, but it wasn't boring at any time. The first leg tie had created some light but sharp pain on the legs, but it wasn't too bad (I am absolutely not into pain) and I really enjoyed "hunting" the jacket while bound. This was one of the nicest rope sessions I had for months! I would even say, this was the best one since long, I had looked for thrills and unescapability for quite a while and that had almost turned into a manic hunt, leaving joy behind. I am sure, I will do something similar again, perhaps add a few features.

I did my best to describe the bondage in detail, so anybody experienced in rope bondage should be able to do it to himself. Of course you should know how to tie a basic karada. If anything is unclear, ask in this thread and will try to explain it more clearly.

By the way, I am looking for a better method to include the upper arms into the karada. If you have any ideas, let me know please.]]>
I put on a simple lycra leotard with long sleeves - long sleeves are good for arm ties, they protect the skin which is very sensible on my upper arms. Underneath I had plain simple underpants, just a precaution to contain a good part of the sperm later on - if necessary. Uncool? Well, not to me. The underpants are invisible and this leotard is my absolute favorite. I also like nudity, but not with optional sperm on my carpet, so a minimum of clothing is required. For your convenience and imagination, add anything you like, except for additional bondage and ballgags, because they would interfere with the scenario, well, keep your mouth and eyes free and be able to walk.

Then I folded a 20m rope in to and put a few knots on the middle section, which was the one end now. Then put that over my head, the knots going down from my chest to a little above my crotch. I put the two lose ends between my legs, then through the rope behind my neck. Then I build a simple karada, but with one extra turn around my upper arms with each "stitch". I wasn't able to tighten the rope around my arms properly but they were way less mobile than without rope.
Then I finished the Karada, making sure that the rope wasn't in the way of anything important and lead the ends to my back again, through my legs. Then I improvised a leg tie above my knees and finally lead the ends of the rope to my back for the hands. Now I looked for the lowest pair of strands going around my back and pulled a loop of the remaining rope through that, doubled it and made it just large enough to comfortably slip both hands through. Then I pulled this loop as tight as possible, using a door handle for help. I still had about one meter of rope left and separated the ends and wrapped them around my wrists a couple of times. Then I tied a simple overhand knot and pulled as tight as possible. Over that, I carefully prepared a second overhand knot, made sure that the first one was still tight, then yanked the second one close as sharp as I could. In fact, I waited a bit before I did that, and remembered where I had my knife - just in case.

Then I started moving around. The leg tie did its work, I could barely walk. Wrists and arms were well secured and it felt right! I was quite aroused already. I checked in a mirror and found that I didn't like the view and so moved on and sat down on my sofa, where I realised a lot of stress on my upper legs and my wrists, it was better to lay down.

Well, as said, the bondage around the arms wasn't perfect and the leg bondage was uncomfortable now, the rope is too thin for just a few wraps. It took me a while to undo the knot on my wrists, then I readjusted things a bit. I sat on my heels, tried again to tighten the rope around my upper arms and then tied the folded legs together, I think this is called "frog tie". Then I tied my hands behind the back again and enjoyed this new position, trying to walk on my knees, rolling over the floor and stuff.

After a little while, I noticed a short hooded down jacket on the sofa (I really like hoods and soft down jackets, combined even better). And then I spent some time trying to put on the hood over my head and the rest of the jacket dangling over my body. I wanted this material as close as possible to me.

At the moment, I am into long term arousal, and so I resisted my urge to come quickly. It was pretty strong, but I didn't want to spoil the leotard yet. Picking up a jacket and putting the hood over your head is quite a task without arms and hands. They were really useless here, and that added to the experience too. When I do SB in my bed, I often miss this evidence of helplessness.

Okay, later on, I decided to free myself, as I had a couple of things to do which I couldn't in this position. I undid my hands after some struggle, freed the legs and undid the upper arm ropes. Then I wrapped the remaining ropes around my body and put on the down jacket. Then I did the stuff I had to do.

Later, I returned and found that I was quite keen to finish this session. So I took off the jacket, recovered the lose rope from my body and made a simple cross hands tie behind my back. I don't remember details from there on, it doesn't matter anyway. It was no extatic moment but a nice and fulfilling finish. After that, I found it quite a challenge to undo the wrist knot and I also found, that I was still in the mood to carry on. Very often, I get stone cold after coming, get all the fetish stuff out of the way quickly and clean up the scene, not this time. But I had taken the decision earlier and I really longed for some lunch (it was 16:00 in the afternoon and I had had breakfast around 9). Well, it is always good to stop at the best moment 😊

I am not sure how much time I spent in bondage during this session. It feels quite long when I look back, but it wasn't boring at any time. The first leg tie had created some light but sharp pain on the legs, but it wasn't too bad (I am absolutely not into pain) and I really enjoyed "hunting" the jacket while bound. This was one of the nicest rope sessions I had for months! I would even say, this was the best one since long, I had looked for thrills and unescapability for quite a while and that had almost turned into a manic hunt, leaving joy behind. I am sure, I will do something similar again, perhaps add a few features.