Like Ra's Naughty Forum
Selfbondage Motion Detector 1.0 - Printable Version

+- Like Ra's Naughty Forum (https://www.likera.com/forum/mybb)
+-- Forum: Self-Bondage (https://www.likera.com/forum/mybb/Forum-Self-Bondage)
+--- Forum: Self-bondage General (https://www.likera.com/forum/mybb/Forum-Self-bondage-General)
+--- Thread: Selfbondage Motion Detector 1.0 (/Thread-Selfbondage-Motion-Detector-1-0)

Selfbondage Motion Detector 1.0 - qwertybcn121 - 31 Mar 2011

Hello again from Barcelona.

New release:
[Image: logocq.png]

This program works as the Selfbondage CD Tray Opener 3.0 when using motion detection, but far better.

This time the motion detection is done by a Silverlight script done by Vangos Pterneas, that means that is smoother than the motion detection method of the CD Tray Opener 3.

As it works with Silverlight API, make for sure that it will work with most of the webcams.

As it works showing a html file, you have to run the program with a folder called webcam in the same folder.
Like the Sefbondage Color Finder 2.0 you're going to need that the computer where you run the Motion Detector have the silverlight plugin installed to work (but, it doesn't need to be connected to internet to work).

As the rest of my programs the Selfbondage Motion Detector blocks forced rebbots or shutdowns of Windows and checks the battery level of the computer every second,so if it drows under 20% it automatically runs the desired release method.

I've recicled the gui of the Selfbondage Color Finder 2.0 to create the Selfbondage Motion Detector.
The first time that you open the program your screen will look like this:
[Image: 93020717.png]

If you take a look at the grey square on the middle of the screen you'll see a button and a slider:
[Image: startcamera.png]

Pressing this button silverlight will prompt you for permission to acces to your webcam:
[Image: sinttulopzb.png]

When you accept you'll see webcam's image on screen. Everytime you move the blackground of the slider will be filled with red color.
You can adjust the accuracy of the motion detection just moving the slider.
[Image: slideraccuracy.png]


When you've adjusted the motion detection take a look at the right side of the gui. You'll find three groups of inputs to setup your session.

The first one is the one dedicated to setup the duration of the session:
[Image: sessionsetup.png]
Is like my other programs.

You have to input how long d'you want the session to last here:
[Image: timeinput.png]

and if you want to play with random time you must check this checkbox and type here the minimum desired time
[Image: checkrandom.png]
and here the maximum:
[Image: timeinput.png]

so the computer will calculate a number beetwen the max and the min. If you input a min higher than the max the countdown will end as soon as you start the session.

As you can't tie yourself whitout moving and the program will tease when you move, is cristal clear that you're going to need sometime to tie yourself before the motion detection starts.
You can input the time that you think that you're going to need to tie yourself here:
[Image: warminginput.png]
(later, during the countdown that appears to show you how much time left until real session starts you'll have the change to increase or decrease this timer).

Finally inside this group you can activate or desactivate the beep during the countdown just checking this:
[Image: beep.png]



The next group that you find is the one dedicated to setup the teasing options:
[Image: teasingsetup.png]


Let's take a look at this group.

The first option that we find let us to tell to the program that when we move it adds x minutes to countdown.
As not everybody have teasing devices I think it would be a good reason to stay quiet while you're waiting for the key.

You can setup the program to do not add any time when motion is detected up to 9 minutes. If you do not want the program to add time to countdown when you move just input a zero in the inputbox (default is 1):
[Image: minutestoadd.png]


The second option that you find let's you setup how many times you can make a movement before the program teases you and also add the time inputed above to the countdown.
[Image: movementallowed.png]

If you want that the computer teases you everytime you move just input zero. If you want that the computer let's you move 5 times before being teased input 5 (at the 6th movement you'll be teased and desired time will be added). Maximun allowed is 9 movements before being teased.
Later I will explain how the program informs to you about how many movements you have made.

Next options let's you choose and test what program do you want to be executed as teasing method when motion is detected:
[Image: sinttuloeh.png]

The default option is any program called pain.exe stored in the same folder that the Selfbondage Motion Detector. This time I have added the possibility of running differents programs depending on the fault that you've made. One for moving, another one for not being quiet and a third for the ranmdom teasing. If you want the same teasing for all the cases just choose the same program as teasing method.

You can get teasing programs please check the pain.exe and exit.exe post

If you want to use sound teasing you can take a look at this thread where a guy ask for a teasing device
http://www.boundforum.com/forum/forum_posts.asp?TID=12576


On Selfbondage Movement Deterctor there is also a random teasing option:
[Image: checkrandom.png]

You can setup the program to tease you randomly. So the Selfbondage Motion Detector will run the teasing program you have choosed on the input above. If you check this option you'll have to choose the % of probabilities of being randomly teased every second. The maximum % is 25% and the minimum allowed is 1%. Everytime that the program teases you due to this option you'll see on the screen a little indow like this one:
[Image: jackpoti.png]

As explained above you can choose what program do you want to be executed to tease you when random teasing works:
[Image: aaaaaaaang.png]
Default is any program called pain.exe stored in the same folder that the main program. So if you do not have a program called pain.exe and yu do not choose any other with the change button you'll be no teased.

If you do want to use a different teasing program than the one that teases you when you move just select it and test if it works as you expected with the test button.

The last options inside the teasing group are related to sound teasing.
[Image: sounteasing.png]
To activate it just mark the checkbox.

Now you can set up the sound level. To do it we need a microphone. Moving the slider we have to set a maximum level of noize threshold, and if we make a noize louder than this level during the session we will be teased:
[Image: sliderb.png]


Until you press the start session button everytime that you make a noize louder that the max allowed level the computer will beep. Use that beep to adjust the noize threshold because when session starts the beep will become an external program running (a "pain.exe" that plays a sound during a minute maybe?)

As the other teasing options you can define what program do you want to be executed when you make noize with that control:
[Image: bbbbbbbbbf.png]

Like the movement teasing you can setup how many minutes d'you want to be added to the countdown when you make any sound louder that the threshold (that's the way you'll learn to remain quiet). You can setup this addition of time with the last option on the teasing group:
[Image: addtimesound.png]
Once again if you do not want to add time to countdown just input zero. The max allowed is 9.


After you have setup the teasing options is time to see how are you going to be free. The last group is about the releasing method:
[Image: releaseb.png]

Here you have two options: select an external program to work as release method (opening the cd tray, moving a servomotor,showing images on screen with the combination needed to open a combination padlock,etc...) or just select what cd tray d'you want to be opened to release a key
(putting the laptop on a shell out of reach, you can play with an usb camera and conecting the computer to an external monitor or flat tv).

CD Tray release works putting the key like this:
[Image: picture17w-1.gif]

If you choose that you want to run an external program as release method YOU'LL HAVE TO TEST IT if you want to start the session. Countdown will not start if you haven't tested that your selected release method works as desired.

When battery level goes under 20% the program will run the desired release method (the cd tray or the program that you've choosed)


Once you have setup all the desired options you're ready to go. When you are ready to start click on the start session button:
[Image: startcw.png]
and you'll get a new window with a countdown and two buttons:
[Image: wamingtime.png]

During this countdown teasing methods will not work. This timer is just to letting you tie yourself. We can have the mouse next to us and if we see that we're alredy tied (just remains one hand, for example), we can force the program to start the session in one minute or if we are taking very long to tie ourselves then we can add 1 minute to the countdown.

When this countdown ends the real session will start.
You'll get on screen a new countdown with a progress bar showing you how many time remains until the release method will be activated:
[Image: countdownt.png]

If you have setup a random time session the countdown will look like this:
[Image: randomtimer.png]

On a normal session without random timer, sound teasing activated and more than zero movements before being teased the screen will look like this:
[Image: realsession.png]

If you take a look under the video you'll see two progressbars.

The first one have a picture of a microphone and shows the level of noize that you're doing on real time.
[Image: soundbar.png]
It works like this:
[Image: sound2.png]

So if you have setup a sound threshold of 20% when you make a noize over the 20% the bar will be filled and you'll be teased (and time will be added to the countdown).
This progressbar will only be on screen when you've setup a session with sound teasing. So if you don't you'll not lose screen espace.


The second bar is only showed when you have setup more that zero movments before being teased. It will be filled everytime that you move:
[Image: movebar.png]
It will be yellow until you are one movement away of being teased. Then it turns to red:
[Image: movebar2.png]
so on next movement you'll be teased and time will be added to the countdown.

If you have inputed that you want to be teased after 1 movement, the progressbar will be filled at the 50% a coloured in red at the first movement that you made (and on the second one... you'll be teased).

On next versions I will add the option of decrease this bar if you do not move during some minutes.


Even with both bars on screen, the program will look for motion on the whole webcam image, so, if bars are drawed over a part of your body and you move that part of your body the program will see that movement

Greets from Barcelona

PS: Only tested on Windows 7, so any feedback about working on XP, 2K or Vista will be much apeciatted.

PS: Program has been updated to version 1.1 You can find more info here: Selfbondage Motion Detector 1.1

RE: Selfbondage Motion Detector 1.0 - LockedBoots - 02 Apr 2011

Downloading en operation perfectly on Vista 😁

RE: Selfbondage Motion Detector 1.0 - qwertybcn121 - 02 Apr 2011

(02 Apr 2011, 03:54 )LockedBoots Wrote: Downloading en operation perfectly on Vista 😁

Thank you very much for your feedback.

Grets from Barcelona.