+- Like Ra's Naughty Forum (https://www.likera.com/forum/mybb)
+-- Forum: Self-Bondage (https://www.likera.com/forum/mybb/Forum-Self-Bondage)
+--- Forum: Self-Bondage Techniques (https://www.likera.com/forum/mybb/Forum-Self-Bondage-Techniques)
+--- Thread: jacket for ratchet (/Thread-jacket-for-ratchet)
jacket for ratchet - Anne - 20 Jul 2019
I often use a rope ratchet in my sessions, these cost just under 9€ where I live and they are great.
However I need to make sure I can't reach them or I'll be able to release my self by using the release latch on the ratchet or unhooking the carabiner.
Therefore I designed and printed a jacket for the ratchet so I won't be able to use the release latch.
It just slides over the ratchet and it's a tight fit. Replace the carabiner with a padlock and release will no longer be possible.
This will allow me to try some different self bondage positions, as I did managed to get out in the past. I'll try some tonight 😊
RE: jacket for ratchet - The inspector - 20 Jul 2019
That’s fantastic! That’s my biggest gripe with carabiners. Quick to close but equally as quick to escape.
RE: jacket for ratchet - franz löve - 20 Jul 2019
Great idea. 😊
RE: jacket for ratchet - ltxrob - 21 Jul 2019
@Anne can you share the STL file please?
might print one or two myself..
RE: jacket for ratchet - Anne - 21 Jul 2019
ratchetjacket_v3.zip (Size: 25.56 KB )
Here you go.
I printed it in ABS, medium quality, 65% infill.