+- Like Ra's Naughty Forum (https://www.likera.com/forum/mybb)
+-- Forum: Bondage (https://www.likera.com/forum/mybb/Forum-Bondage)
+--- Forum: Plugs, vibrators, watersport and chastity toys (https://www.likera.com/forum/mybb/Forum-Plugs-vibrators-watersport-and-chastity-toys)
+--- Thread: Chastity The good! & The bad! (/Thread-Chastity-The-good-The-bad)
RE: Chastity The good! & The bad! - Like Ra - 27 May 2021
Two versions of 3d printed chastity Cobra cages appeared on Ali. This custom Pro design looks more promising and comfortable.
The comments say, that all new 3d printed cages are originally white, then painted, and the paint slowly peels off. So, the recommendation is to buy the white version (also cheaper).
RE: Chastity The good! & The bad! - Like Ra - 27 May 2021
Another 3d printed almost flat chastity cage, called Spider.
Note, that the 3d printed designs are roughly 2-3 times more expensive. I wonder about the comfort and escapability...
RE: Chastity The good! & The bad! - Like Ra - 27 May 2021
And this is the 2021 standard cobra (not custom) design for comparison.
RE: Chastity The good! & The bad! - vanessa_fetish - 27 May 2021
(27 May 2021, 00:30 )Like Ra Wrote: And this is the 2021 standard cobra (not custom) design for comparison.
I have the short one on now. 4 days and still comfy.
RE: Chastity The good! & The bad! - ltxrob - 05 Jun 2021
(27 May 2021, 00:16 )Like Ra Wrote: Two versions of 3d printed chastity Cobra cages appeared on Ali. This custom Pro design looks more promising and comfortable.
The comments say, that all new 3d printed cages are originally white, then painted, and the paint slowly peels off. So, the recommendation is to buy the white version (also cheaper).
I have a couple of these..
Pretty comfortable and very light to wear.
BUT
The fit between cage and Ring is pretty slack meaning the two can hinge about the lock a bit leaving a pinch point.
I don't know if the genuine Kink 3D made models are more precise to avoid this, but I'm not willing to gamble $150 to find out
To keep mine tight together I just slip 2 small cable ties behind the ring and through the first vent holes and snug it all up..
then you need both a key and cable cutters to release yourself.
RE: Chastity The good! & The bad! - Like Ra - 15 Jun 2021
New 2021 chastity devices - Positive/Negative Cobra Chastity Device
I'm afraid erection will be painful, while I really doubt it's inescapable.
RE: Chastity The good! & The bad! - Culmor - 15 Jun 2021
(15 Jun 2021, 22:07 )Like Ra Wrote: I'm afraid erection will be painful, while I really doubt it's inescapable.
Life...life finds a way.
I'm more concerned about the small size's '3mm between cage and ring'; I find it difficult to believe that's safe. I use the smallest spacer on my CB6000s which is about 6mm at its closest point and that's pretty damn tight. It's very easy to draw blood putting it on (which is a no-no for me).
RE: Chastity The good! & The bad! - Like Ra - 16 Jun 2021
(15 Jun 2021, 23:37 )Culmor Wrote: '3mm between cage and ring';At least you have a choice here with bigger rings. I have issues with the rings in general, because too wide rings make no sense, and small rings leave hematomas in an hour (because of swelling, for example). So, ring-based cages are not for me 😕
RE: Chastity The good! & The bad! - Culmor - 11 Jul 2021
Something for the Game of Thrones fan?
RE: Chastity The good! & The bad! - krinlyc - 30 Jul 2021
Hi
I have bought this one:
Chastity cage
and I do wear it since a couple of days. If my wife goes with it, I ll get a PA Piercring...
Right now it's possible to cheat... With that PA I can't 😊
krin