+- Like Ra's Naughty Forum (https://www.likera.com/forum/mybb)
+-- Forum: Self-Bondage (https://www.likera.com/forum/mybb/Forum-Self-Bondage)
+--- Forum: Self-Bondage Techniques (https://www.likera.com/forum/mybb/Forum-Self-Bondage-Techniques)
+--- Thread: Built an Edging/Orgasm Denial Device, NoGasm (/Thread-Built-an-Edging-Orgasm-Denial-Device-NoGasm)
RE: Edging - essanym - 06 Apr 2021
(06 Apr 2021, 04:32 )Tinker D Wrote: Came up with this.
Ooooooh, that might work. Can I get a link please?
RE: Edging - Tinker D - 06 Apr 2021
Try this.
RE: Edging - Like Ra - 06 Apr 2021
MP3V5050DP on Ali
mp3v5050gp on Ali
MPS20N0040D on Ali
Check the amount of sensors. There is always something cheaper 😉
RE: Edging - blueboyia - 30 Jul 2021
(06 Apr 2021, 05:47 )essanym Wrote:(06 Apr 2021, 04:32 )Tinker D Wrote: Came up with this.
Ooooooh, that might work. Can I get a link please?
@essanym did you ever get this thing finished? I've spent too much time today reading and thinking about putting one of them together, and figured SOMEONE here would have some experience. I'd be pretty interested in getting one of those boards if you still have any, and would welcome a pointer to any other resources about this that you might have.
RE: Edging - essanym - 30 Jul 2021
(30 Jul 2021, 01:07 )blueboyia Wrote:(06 Apr 2021, 05:47 )essanym Wrote:(06 Apr 2021, 04:32 )Tinker D Wrote: Came up with this.
Ooooooh, that might work. Can I get a link please?
@essanym did you ever get this thing finished? I've spent too much time today reading and thinking about putting one of them together, and figured SOMEONE here would have some experience. I'd be pretty interested in getting one of those boards if you still have any, and would welcome a pointer to any other resources about this that you might have.
I got the part I needed after 6 months of waiting but I've also started my job back at around the same time so haven't gotten around to actually putting it together. Maybe I will now that it's fresh on my mind again. I do have plenty of the boards I could sell. $5 plus shipping in the US. They can easily fit in a padded envelope. Only pointer I can give you is know how to solder before attempting this.
RE: Edging - leonixy - 24 Aug 2021
I made this version of the device
https://github.com/night-howler/protogasm/
it has the same algorithm.
It works only on paper.
Either too late or too early the reaction and each time in a different way.
Orgasm is too difficult a thing and only machine learning can predict it.
RE: Edging - Lancer - 12 Jul 2022
I know this thread has been a bit dead for a while, but isn't the real problem in detecting how close one is to an orgasm more in the data? I mean, how would you even know someone is close without brain monitoring? Muscle contractions are a hard maybe at best.
If we could gather lots of data on it and know nearly the exact moment of the orgasm, it should be trivial to input that into a machine to predict orgasms. Difficulty is in the data collection and the somewhat random nature of it.
RE: Edging - Tinker D - 12 Jul 2022
I do know that the body shakes or shivers before cumming, maybe body resistance? Stick two probes and take a meter reading. Then play with yourself and just before you pop, watch the meter. May give us a clue, like a lie detector or something.
RE: Edging - Like Ra - 12 Jul 2022
I think, ideally, the measurements should include contractions, skin potentials, breaths, pulse, ECG, and brain waves. And... there must be some scientific papers on it.
RE: Edging - johngerners - 16 Jul 2022
As an engineer, I would assume these devices need calibration to each individual. And even then, there are couple of factors that could distort readings right before orgasm. For example an excessive amount of endurance sports will certainly reduce muscle contractions (mainly through exhaustion of the nerve system).
So I'm really sceptical.
What might actually work is if you use an estim. Some stimulation patterns might bring you always near but never over the edge. But it would certainly need a lot of trying to find the right settings...