(23 Apr 2017, 15:44 )Like Ra Wrote: [ -> ]Pressure sensors in a butt-plug connected to a vibrator/masturbator. Increased pressure should stop stimulation for some time.
I found this: eBay: force sensitive resistor
On Ali: 0.5" resistor, thin film resistor
OK, sensor react on a pressure. So, where on a butt plug it should to be positioned ?
(23 Apr 2017, 16:44 )Vixien Wrote: [ -> ]So, where on a butt plug it should to be positioned
Inside the plug, it must be "surrounded" by the sphincter.
Servo motors can move parts of you body up and down or rock you back and forth. In other words, the rotation of the motors should be converted into the push-pull movements (any ideas how to do that using winches?)
For example:
o- any street sound will activate motors for 10seconds. One of the motors can lift you bound legs or arms up (depending on the transmission it can be 10cm, 50cm, or the full cycle up & down).
o- alarm clock will activate tilting of the bed, so you will fall on the floor (bound and gagged, of course, he-he)
Light/sound/alarm clock/timer can trigger air compressors to inflate a tyre that will tilt the bed. The tyre can be punctured, so after some time the bed will return to the original position. But there can be another compressor and a tyre under the other side of the bed ;P
And my partner call me as a "creative" I'm zero comparing to you 😊
I should move to Germany , and we have to establish workshop for that kind of a equipment.
I've been think for quite a while about using an arduino and various shields like accelerometer.
Part of the rig will be electro magnets to keep you restrained in a hogtie, then unless you move regularly and the accelerometer detects the movement you will receive an electric shock from a tens/pes/erostek unit ... that should get you moving again.
Combine that with some rfid targets and you have to move back and forth between these points in order.
Get the right number of targets and then the arduino releases the electro magnets.
All this is held in a box on a body harness in the lower back.