11 Jan 2017, 00:10
Hello guys ! It has been a really long time !
My girlfriend left for a few weeks yesterday morning. So, I decided I had to make a vacuum bondage session !!! I went to the shopping centre and I bought a very cheap inflatable bed, duct tape, and black plastic sheet !
At home, I made a large bag with the plastic. You probably guessed the idea: inserting the mattress in the bag and suck all the air out !!!
Here is how I proceed...
[attachment=21492]
To get a good suction with this kind of mattress, it requires something that will suck the air from a larger surface. By inserting a folded blanket and by putting the vacuum hose between the layers, the thing seems good...
[attachment=21493]
The vacuum is at the end of the homemade vacbed, taped with duct tape:
[attachment=21494]
Also, I activate my vacuum with a small handle inserted at the right of the vacbed:
[attachment=21495]
And to get a good seal, I use this technique that consists of rolling the excess of the bag around something. I used a broom shaft, taped to the bag:
[attachment=21496]
Finally, here is the result !!! The "poor man vacbed" !!!
[attachment=21497]
The feeling was very impressive ! The inflated mattress avoid me to make large movements.
[attachment=21498] [attachment=21499]
And some gif for your pleasure !!!
[attachment=21490] [attachment=21491]
Vacuum_experiments
My girlfriend left for a few weeks yesterday morning. So, I decided I had to make a vacuum bondage session !!! I went to the shopping centre and I bought a very cheap inflatable bed, duct tape, and black plastic sheet !
At home, I made a large bag with the plastic. You probably guessed the idea: inserting the mattress in the bag and suck all the air out !!!
Here is how I proceed...
[attachment=21492]
To get a good suction with this kind of mattress, it requires something that will suck the air from a larger surface. By inserting a folded blanket and by putting the vacuum hose between the layers, the thing seems good...
[attachment=21493]
The vacuum is at the end of the homemade vacbed, taped with duct tape:
[attachment=21494]
Also, I activate my vacuum with a small handle inserted at the right of the vacbed:
[attachment=21495]
And to get a good seal, I use this technique that consists of rolling the excess of the bag around something. I used a broom shaft, taped to the bag:
[attachment=21496]
Finally, here is the result !!! The "poor man vacbed" !!!
[attachment=21497]
The feeling was very impressive ! The inflated mattress avoid me to make large movements.
[attachment=21498] [attachment=21499]
And some gif for your pleasure !!!
[attachment=21490] [attachment=21491]
Vacuum_experiments