Self bondage tube

[Anne]

I am walking around with this idea for quite some time now and since a successful tryout with a cardboard tube a few weeks ago I finally got to make a decent version. The concept is simple: you can't escape if you can't reach any knots.

I take a tube put a rope ratchet in on one end and use that to pull in the end from the rope that binds my wrists. Now I can't undo my bondage as the rope is pulled tight in the tube were I can't reach the knot. The other end of the tube is tied to my ankles (also bound) so I can't reach the knot to undo my legs either.

Maybe some photo's will make it clear.

First the finished product:
   

I tie my ankles and connect the ring on the left, I tie my wrists and tie the not to the carabiner on the right. The loose end in the middle will pull the rope ratchet inside the tube tight, pulling the carabiner away from my hands into the tube.

Now for the details.

The first part is the most important. Here I'm adding a ring because in this scenario I want to tie this end of the tube to my ankles. On the inside I connect an ice lock, this is my release.

           

Part A assembled:

   

Next is the rope I need to tighten the ratchet, I just thread it trough one of the holes I made for this reason. There are many variations that I can do with this device depending on the scenario. In this case that hole works best.

   

Attach the ratchet

   

Add the ring that needs to come out the other end where I can tie the final knot of my wrist rope.

   

Like so.

   

Assemble the other end as well

   

Leg end goes in the tube like this

       

Other end is similar and gives the final assembled product

   

The bondage itself is simple:

• tie ankles together and connect to bottom end of the tube
  
• coil a rope a few times around the wrists, a few times in between to cinch it tight and tie it of to the ring on the other end of the tube.
  
• pull the ratchet rope coming out of the middle to pull the knot into the tube, out of reach of your fingers
  
• wait for the ice to melt
  

I can say this worked fantastic, I put on my new swimsuit (amazing one, I love it, details maybe in another post or on request) and got stuck for almost an hour. I tried everything I could think of to get out but I had to wait for the ice to melt.

Sorry no pictures or video of this session, I was only going to do a quick test run and expected some flaws so I could escape (as usual) but it worked great.

The same principle but with a shorter tube can work great for just tying your hands, the other end does not have to be connected to something so I'm planning on pulling my hands high up between my shoulder blades and going for a walk outside until the ice melts. Long tube will work as well but will be a bit inconvenient.

I do have some low quality stills from the proof of concepts with a cardboard tube:

Tying my wrists

   

pulling the ratchet

   

Can't reach the knot anymore, I'm stuck!

   

Nothing left to do but struggle.

   

More struggling, still haven't found a way out yet.

   

Trying to pull apart the ice lock, no success.

   

I give up

   

Another tie. Also another outfit, I got really warm in that previous one.

I frogtied my legs but also connected my ankles by a short length of rope to which I also fastened the ice lock on the one end of the tube.

Tying my wrists.

   

Wrists coils and cinch are done, I tied it of to the ring that will pull it out of reach, now grab the ratchet rope and make it final

   

Getting the very last bit of slack out was hard in this position

   

That worked eventually, now I'm stuck again

   

Struggling to get out. This position is a lot less comfortable than the previous one and I have a feeling I wont get out before the ice is molten.

   

The frogtie makes it impossible to put a lot of force on the ice lock, with the hogtie I could pull with all my might and get it to open before it was fully melted but that's obviously not an option here. I'm in it for the full duration.

   

This is the closest my hands can get to the knots on my legs, guess I'll have to endure. Couldn't even grab my own ass or rub my penis a bit. Very frustrating.

   

That's all I have for now.

I'll show some pics of me in bondage with the larger bondage tube as soon as we've decided on the outfit.

Let me know what you think. I hope I was clear.

I have paint ready to give the gray pvc a nicer colour and I aeady thought of lots of different positions I can tie myself up in with this new toy. Total cost of the tube, other pvc bits for the endings, the rings, carabiner, rope ratchet and more than enough rope was something like 30€. Money well spent, I'm only just getting started with all the possibilities this has 😊

[Tinker D]

That's pretty good. And of course, I love your first outfit.
I'm trying to find a flaw, but I think you did a darn good job there.
Well done.

[Like Ra]

I was thinking about using a tube with a rope inside since I saw an ASCII drawing in alt.bondage news group. It was in a text file, labelled something like "ideas for your self-bondage sessions". But I could not invent anything useful 😁

I think it looked like the following:

Code:

  __________________________________
O=|===============  ===============|=O
  ----------------||----------------
                 /  \

In other words, a tube with a rope inside, two loops on both sides of the tube, and the rope ends go out from a hole at the middle.

[Anne]

I was thinking about using a tube with a rope inside since I saw an ASCII drawing in alt.bondage news group. It was in a text file, labelled something like "ideas for your self-bondage sessions". But I could not invent anything useful 😁

I think it looked like the following:

Code:

  __________________________________
O=|===============  ===============|=O
  ----------------||----------------
                /  \  

In other words, a tube with a rope inside, two loops on both sides of the tube, and the rope ends go out from a hole at the middle.

That's indeed the same idea. Add a ratchet to keep it tight and an ice lock for release and you have what I did.

[madjack]

Wow! Very clever and also neatly done.

For some time now I've been considering using a pole in my self-bondage to make it impossible (or very difficult) to reach knots, but hadn't considered the tube solution - looks interesting, especially with the ratchet and release included.

thanks for sharing

MJ