Big session coming up, but I need help!

[The inspector]

Only thing left to order is the catheter. Any suggestions for a one size fits all? None of the ones I can find on eBay just size in millimetres. Not sure how they measure? I’m guessing from top to bottom of shaft?

[Like Ra]

Have a look here:

http://s.click.aliexpress.com/e/BX0PXDA
http://s.click.aliexpress.com/e/bSpM8NrK

   

[The inspector]

Was looking for an external one as I have no experience of putting anything down my shaft.

That’s why I was questioning the sizing. Seem to start at 25mm and go up to 40. I’m guessing it’s the diameter of the tip where your head sits.

[Like Ra]

I have no experience of putting anything down my shaft.

Interesting experience with no predictable outcome. You may end up liking it, you may end up hating it, or you might do something wrong.

Was looking for an external one

A much safer option, but in the case of the internal catheters you can't stop the flow.

Some links:

5 pcs self adhering male external catheter
10pcs male external catheter single use disposable urine collector Latex urine bag pick urinal bag 20mm/25mm/30mm/35mm CE FDA

[The inspector]

I have no experience of putting anything down my shaft.

Interesting experience with no predictable outcome. You may end up liking it, you may end up hating it, or you might do something wrong.

Was looking for an external one

A much safer option, but in the case of the internal catheters you can't stop the flow.

Some links:

5 pcs self adhering male external catheter
10pcs male external catheter single use disposable urine collector Latex urine bag pick urinal bag 20mm/25mm/30mm/35mm CE FDA

That’s my thoughts! I would love to try it but I need someone with experience to help I think. Not many things phase me. But I’m very cautious around that. 

With regards to the external ones then. Any idea how the sizing works? 
Is it the diameter of the tip? 

It would be better if I couldn’t control myself, but either way. I’m going to be bound for 4-5 hours minimum. I’ll drink plenty before hand and will no doubt slip on the button at some point dosing me up nicely. Might have some cum in there aswell by that point! 😊

[essanym]

I would love to try it but I need someone with experience to help I think. Not many things phase me. But I’m very cautious around that.

If you want to experiment with urethral insertions, use this stuff https://www.amazon.com/Surgilube-Surgica...B00JLIFWUU.  I'm not super into it, but I have tried it out a bit.  A device that was easy to slip in with no pain and was surprisingly fun when used with e-stim was this http://s.click.aliexpress.com/e/bWqPbW9E.  Mine came with a kit that included a crappy e-stim box I ended up throwing away.  The rod itself slips in with ease if used with that lube but is still actually possible even without lube at all.  Could be a fun first step into urethral toys if you are inclined.

[essanym]

With regards to the external ones then. Any idea how the sizing works?
Is it the diameter of the tip?

I took pictures of the kind I just bought to help you figure this out.  I was looking online for all of this same information and found everything to be vague at best.  

The measurements I took are, of course, not exact since the thing I'm trying to measure is flexible, but it's a decent approximation.

Here is the kind I bought.  I read somewhere that 28mm is average.  I didn't base my purchase on my own measurements.
   

Here is a view of the catheter with my calipers to show you where they seem to base the measurement on the packaging.  Additionally, around 1 cm below where I am taking that measurement, the catheter begins to have adhesive which is quite tacky, but doesn't leave any residue on my finger.
   

Outside Diameter (OD) of the connection tube
   

Inside Diameter (ID) of the connection tube
   

[The inspector]

With regards to the external ones then. Any idea how the sizing works?
Is it the diameter of the tip?

I took pictures of the kind I just bought to help you figure this out.  I was looking online for all of this same information and found everything to be vague at best.  

The measurements I took are, of course, not exact since the thing I'm trying to measure is flexible, but it's a decent approximation.

Here is the kind I bought.  I read somewhere that 28mm is average.  I didn't base my purchase on my own measurements.


Here is a view of the catheter with my calipers to show you where they seem to base the measurement on the packaging.  Additionally, around 1 cm below where I am taking that measurement, the catheter begins to have adhesive which is quite tacky, but doesn't leave any residue on my finger.


Outside Diameter (OD) of the connection tube


Inside Diameter (ID) of the connection tube

@Essanym! That is a massive help! Thankyou! Will order one based on your guesstimate today! 😊

[The inspector]

Update!

The following components have arrived.

Sheath for wand.
Cable for electronics
12v magnet
12v 2amp power supply x2
240v to AA battery converter. (Help keep that but plug going for the session and allow it to be on a mechanical timer.
Septum stirrup
New corset

Still to arrive

Peristaltic pump
Condom catheter
Tubing for catheter and pump
12v Nc switch.



Still have to get the wood to build the chair. Will do that when the wife is away. Also need to build a gag to house the tubing that connects to the pump.

Getting really excited now!

[The inspector]

Update!

Most of the parts have arrived so I had a bit of a play. No bondage as I didn’t have that long. Few things you may be able to help with or suggest alternatives.

First of all.

The mag lock I have gets very warm. 12v 2 amp power supply for it. It’s not unbearably hot. But was quite toasty after an hour. Have people had experience of them getting warm before? Any solutions? Might give it a run for 4 hours and see what it’s like at that point.

Secondly. Timers for automating the pleasure work well. But I will need your help to determine the patterns. What I need is a timescale as I will subconsciously remember my own.

So, mechanical timer is for the mag lock. And is set to turn off at a specific time. (4 hours)

Electronic time A is for the wand

Electronic timer B is for the butt plug.

The session will begin at midday. So please list them like this.

Timer A

12:02 On

12:05 Off

12:09 On

12:22 Off

Etc etc....

Remember you are choosing my pleasure centre here so be creative. The only rule is that an item can’t run for more than 20 minutes and if it does run for the full 20 minutes it must be allowed 15-20 minutes to cool.

Have fun!