Like Ra's Naughty Blog » Where can I find this enema nozzle?

Long time ago I found this picture in the Internet. However, there were no indication on the source. I checked hundreds of online shops but – nothing even close. 14″ (35cm) could be a great fun!

Any ideas? Pointers? Links?

Related posts:

Lycra catsuit or another fetish from Adidas. Part I
If you remember this series of photos, the leotard (with long sleeves) was also made by Adidas. I spent some...
Shiny silver lycra statue
I’m speechless again. My boiling imagination creates one mental image after another… Apparently the photos were taken at a gymnastics...
Pants with hood (suckpants) and bondage dreams.
Something you absolutely can’t do alone
Long time ago when I discovered this “device” on the Internet, I thought that it would be fun to try...
Rubber & Lover or Latex vs PVC
Despite the site is called “Rubber&Lover Japan” it’s not about rubber or latex, but something what looks (or at least...
Bolero single-glove. Self-bondage ~~not~~ possible
Update Apr 27, 2010 @ 23:26 The instructions are translated into German. (See the forum thread). Strappado, you’re a star!...

Categories

Madjack

Like Ra! Like – WOW!!

I’ve never seen anything in the enema world quite as sexy looking as this! Now there are two of us lookin for one!

Brilliant

Comment :: June 14, 2009 at 10:20 :: Quote

Like Ra

Madjack wrote:

I’ve never seen anything in the enema world quite as sexy looking as this!

Totally agree, very good definition. It is indeed very sexy looking.

Now there are two of us lookin for one!

I asked on the enema forum, but got no response yet.

Comment :: June 14, 2009 at 13:05 :: Quote

doubleflash

I’d guess that the nozzle was fabricated from a couple of stock dildoes. I’ve made shorter nozzles by freezing a dildoe and drilling out the center on a drill press. Then I force in clear plastic tubing through the length of the diloe and trim it to length. It’s important to seal the tubing around the tip of the nozzle. I’ve found that silicone sealer for aquariums works pretty well.

You could probably make a 14″ nozzle by coring out two dildoes and forcing tubing through both. A little silicone cement should stick the pieces together quite well.

So many ideas and so little time…..

Comment :: June 16, 2009 at 11:38 :: Quote

doubleflash wrote:

I’d guess that the nozzle was fabricated from a couple of stock dildoes.

Mmm… I don’t think so. That yellow thing looks seamless, made out of one piece of something, with built in “plato” and tubing.

According to the enema forum, one couple bought a similar device (30 cm long, 5cm thick) is a sex-shop in Copenhagen. So, they do exist.

I’ve made shorter nozzles by freezing a dildoe and drilling out the center on a drill press.

WOW! That’s professional! I once made a enema-plug using the same method as described here: DIY butt-plug. But with a tube instead of a chain.

True. Here’s another one. What about an “ideas box” in the forum?

Comment :: June 17, 2009 at 01:46 :: Quote

I think that an “idea box” is a grand idea. There are a lot of creative people who might want to publish their tried and true kinks. Your aquarium pump-timer setup should be the first entry. I’ve had a lot of fun with that… ;-)

Comment :: June 17, 2009 at 15:24 :: Quote